Can I install Thunderbird on a computer that aleady is running MS Outlook 2003?

I am currently running MS Office 2003 with Outlook. When I replace my old computer with a new one, I am thinking about installing a version of MS Office without Outlook, and so would like to experiment with Thunderbird and some other email clients on my old computer before I make the switch. Both computers have Windows 7. Will installing Thunderbird create a conflict with Outlook?

can you? It is the only way to import from outlook.
Will they conflict... most likely. But not how you mean.
Back in the day the settings for outlook would be to remove messages from the server, Thunderbird will import that setting the result is which ever goes on line first will download and delete the pop mail.
The simple answer for the time you run both is disable deletion on the server in outlook before you import and then they will play nice together, except for each wanting to be the default mail client.
Tools menu (alt+T) > Options > advanced > general will tel you turn Thunderbirds quest to be the king of the kids off until such times as your ready to change over finally.

Similar Messages

Can I install elements on a computer that already has photoshop CS 6 without damaging CS 6.

I have photoshop CS 6 for students and teachers on my computer already. I was feeling optimistic about the time and attention I would have for learning all the complications of a full version. I have used only elements in the past and have not been an advanced user at that. I need to edit some photos for school quickly. Can I install the version of elements that I already have without damaging the CS 6 version? My installation disk for CS 6 has a small crack in the center and I'm not sure if it will work again.

Yes, all versions of Adobe software install into their own separate folders on your hard drive and will happily co-exist.
So you can install Elements without interfering with CS6.
My installation disk for CS 6 has a small crack in the center and I'm not sure if it will work again.
Doesn't matter. You don't really need it again other than as a drink coaster. It probably contains outdated software anyway.
You can always download the CS6 installer from the Adobe website when you need to re-install CS6.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

HT1338 I've just tried to download Mountain Lion on my Mac Pro and it says that I can't install it on this computer. Help

I just tried to download Mountain Lion on my Mac Pro and it says that I can't install it on this computer.
I have version 10.7.4 installed and I'm using Lion at the moment.
Could you advise me as to how I obtain Mountian Lion on this computer.
Thank you

Check the complete list of supported machines here:
http://applehelpwriter.wordpress.com/2012/08/03/will-mountain-lion-work-on-my-ol d-mac/
(ToU Disclaimer: this link to my site contains other links which promote my services as a technical writer)

I can not install itunes on my computer. It tells me I need to update safari, and I have. Help please

I can not install itunes on my computer. It tells me I need to update safari, and I have already done that. Please help.

It tells me I need to update safari, and I have already done that.
That's an unusual message to be getting on a Windows system. (Typically it's a Mac itunes installation message.)
I'd like to have a closer look at that error message please, tamara.
Try another iTunes install. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

How can I deactivate photoshop on a computer that is not working any more?

How can I deactivate photoshop on a computer that is not working any more?

Contact Adobe customer service:
http://helpx.adobe.com/contact/
Ken

SP 2013 - Error: This operation can be performed only on a computer that is joined to a server farm

Hello Community!
I am working with SharePoint 2013 and I built a farm inside the firewall. Then a decision was made to move the two WFE's to the DMZ. Since that time, whenever I try to access the site collections, I get the error below.  Other information: All
the web applications are on port 80, but I'm not having any problem with accessing Central Administration which is on port 8080; the network team did screw up the DNS originally, but I'm told it's correct now; the two WFE's servers show in my Manage servers
on the Farm interface 2X, once with the server name, once with the fully Qualified Domain Name, the ones with the FQDN shows a Services Running status of Not Configured.
Has anyone else ever seen this error and if so please provide guidance and instruction for fixing the error.
Thanks!
Tom
Server Error in '/' Application.
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server
to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code.
Exception Details: System.InvalidOperationException: This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server
to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified
using the exception stack trace below.
Stack Trace:
[InvalidOperationException: This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration
database. To connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.]
   Microsoft.SharePoint.Utilities.SPUtility.AlternateServerUrlFromHttpRequestUrl(Uri url) +262
   Microsoft.SharePoint.Administration.SPAlternateUrl.GetContextUri(HttpContext ctx) +385
   Microsoft.SharePoint.SPAppRequestContext.InitCurrent(HttpContext context) +1013
   Microsoft.SharePoint.SPAppRequestContext.get_Current() +175
   Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken,
SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) +400
   Microsoft.SharePoint.SPRequestManager.GetContextRequest(SPRequestAuthenticationMode authenticationMode) +120
   Microsoft.SharePoint.Administration.SPFarm.get_RequestAny() +370
   Microsoft.SharePoint.SPLanguageSettings.GetGlobalInstalledLanguages(Int32 compatibilityLevel) +39
   Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.RefreshInstalledLocales() +103
   Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.Initialize() +130
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.System.Web.IHttpModule.Init(HttpApplication app) +873
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +582
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +322
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +384
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +397
[HttpException (0x80004005): This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To
connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +646
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +771
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18010
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint Gypsy

Hi Tom,
According to your description, my understanding is that you got an error when you moved your SharePoint.
This error occurs when the SharePoint farm administrator cannot connect to your configuration database. Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server. Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server. More information about creating rules in firewall, please refer to the following posts:
http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server
http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Can I install ios5 from a computer other than my primary computer?

I have downloaded the Lion update in the office and would like to install ios5 on my iphone and ipad before going home, which is where my "primary" computer is, i.e., the one I use to sync. Can I install ios5 from any computer or does it have to be the one I have always used for syncing?

You can but if your office computer does not have your backups and iTunes Library from your home computer then the device contents will be wiped. I'd wait until you got home.

Create a SharePoint 2013 Appplication in C#,Error:This operation can be performed only on a computer that is joined to a server farm

I want to create a sharepoint application in C#:
SPFarm CurrentFarm = SPFarm.Local;
SPWebApplicationBuilder webAppBlder = new SPWebApplicationBuilder(CurrentFarm);
webAppBlder.UseNTLMExclusively = true;
webAppBlder.AllowAnonymousAccess = false;
webAppBlder.UseSecureSocketsLayer = false;
SPWebApplication webApp = webAppBlder.Create();
webApp.Provision();
It's create a new application succeed,but when I view the site there is an error:
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
How can I fix this issue?
ps:I had create some new application in sharepoint web site.It's all fine without any issue.
The sharepoint server,sqlserver and the programs in the same machine.
Besr regards

Hi,
I think below line is causing the error -
SPWebApplicationBuilder webAppBlder = new SPWebApplicationBuilder(CurrentFarm);
can you put that line within a try catch and see that causes an exception. If so, you might try as below-
SPSecurity.RunWithElevatedPrivileges(delegate()
webAppBuilder = new SPWebApplicationBuilder(CurrentFarm);
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

How can I install Premiere in another computer

How can I install Premiere in another computer, if my main computer does not work. The service is paying monthly.

As far as I have understood it you can install PP on as many computers as you like, but only two can be active at the same time. So if you have installed it on just one computer you should have no problems installing it on a second one. If you want to install it on a third, you would have to deactivate one of the other previous installations to get it to run.

SharePoint 2013 - Server Error in '/' Application - This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database

Hi
After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
I can open Central Administration site just fine.
but now when I open any Site collection, I got this error.
Server Error in '/' Application
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
I have restarted all the servers: SQL server, WFE and APP servers but still cann't get this resolve.
Services on all servers are running, IIS - application pools are running.
Can someone help with where that could be a problem or if there is a solution.
Thanks in advance for your comments or advices.
Swanl

Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Can't instal firefox 4, Gives error that my comupter needs to reboot to uninstall an older vesion. But I have uninstalled the other version and have rebooted 4 times now.

Can't instal firefox 4, Gives error that my comupter needs to reboot to uninstall an older vesion. But I have uninstalled the other version and have rebooted 4 times now.

I have a similar problem installed firefox 4.0 update (x86 en-us) am told to reboot all the time. I cannot uninstall and it has also messed up my email attachments which I cannot now open except if they are microsot office.

Since I upgraded to Elements 13, I have lost all my filters from 3rd partys. How can I install them in version 13 that still are installed in version 11 and 12?

Since I upgraded to Elements 13, I have lost all my filters from 3rd party. How can I install them in version 13 that still are installed in version 11 and 12?

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*http://kb.mozillazine.org/Lost_bookmarks

I can not install adobe flash player saying that I have to quit safari, but nothing has opened.

I can not install adobe flash player saying that I have to quit safari, but nothing has opened.

cristianefromriodejaneiro wrote:
I can not install adobe flash player
Correct.
You cannot load Flash on your iPhone.

De authorizing a computer that won't run QT

How do you deauthorize a computer that won't run quicktime, causing itunes not to launch?
Or better yet, how do you fix quicktime so it works, allowing itunes to run in the first place.

Thanks for your reply!
My OS is posted along with my original post... XP pro... But is at the SB2 with all the latest updates via automatic updates. I can't seem to properly uninstall quicktime, as it gives me an error, and re installing gives an error as well, but I don't have those errors readily available to post at this time.
Running QT itself provides no error information. It simply doesn't run! When launched, I get an hourglass for a few moments, and it's done! That's it.
I had downloaded the latest at the time the other posting was made. I'll try again with the latest. I Don't expect any improvement.
Perhaps I'll use your recommendation and deauthorize all, and re authorize those that still work. I'll likely need to reformat and install everything on this system to get it working again as it looks.

Can I install Windows 7 on my new MAC Pro running OSx 10.9

Can I install Windows 7 on my new MAC Pro running OSx 10.9. BootCamp Assistant states Windows 8 or later. Help please!

Neil already gave you the answer. Here is the table repeated in case you accessed the wrong location.
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
Mac Pro (Late 2013)
BCA
Mac Pro (Mid 2010)
5
5
4
DVD
DVD
DVD
Mac Pro (Early 2009)
5
5
4
DVD
DVD
DVD
Mac Pro (Early 2008)
4
4
DVD
DVD
DVD
Mac Pro (Early 2007)
DVD
Mac Pro (Mid 2006)
DVD
You should seek additional Boot Camp help in the Boot Camp forum: https://discussions.apple.com/community/windows_software/boot_camp
The Boot Camp Help Guides are located here: http://www.apple.com/support/bootcamp/

Can I install Thunderbird on a computer that aleady is running MS Outlook 2003?

Similar Messages

Maybe you are looking for