Can I install Tiger OS on a iMac G3 slot loading DV model?

Right now I am currently running 10.3.9.

Hi C.R.!
"I tried using the DVD that came with my daughter's MacBook..."
That's the problem!
That disc is Model Specific.
You must use a Full Retail Version, of the Tiger Install DVD.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
ali b

Similar Messages

Can't install OS 8.6 on iMac DV Slot Loading - firmware?

I have an iMac "DV" (400) Slot Loading (http://support.apple.com/specs/imac/iMacSlotLoading.html) that I am trying to install the original system on (8.6, if I'm not mistaken). It has 128 mbs of RAM, a 10 gb HD, and currently no system installed on the hard drive. I have updated the firmware to 4.1.9.
The problem is that the iMac won't boot from the install CD for me to do the installation. The iMac used to have OS 9 installed on it, and when I tried to run the installer with the computer booted from 9, it told me it couldn't run on this machine. I believe I have the correct installation CD. I have also tried a couple of other installation CDs, and neither 8.5 or 8.6 will boot this computer.
Is there a way I can get 8.6 installed on this machine with the 8.6 CD, or is it just not possible for me to install 8.6 any more?
Could the firmware update be preventing me from booting from 8.6?
Thanks,
Jon
iMac "DV" (400) Slot Loading Mac OS 8.6 or Earlier

http://docs.info.apple.com/article.html?artnum=25517 shows that later releases of the same iMac came with 9.0 through 9.0.4. Those that did can't use an 8.6 install disk.
You can sometimes plug in the serial number of the Mac in the http://www.apple.com/support/ search engine at the bottom right hand corner of the page where it says to do so, to get an idea of how old the Mac is.
Knowing that date, will tell you the likely operating system to have been installed. Since 9.0 was released in October 1999, a date after October 1999, would indicate the Mac can't boot 8.6.
Source: http://en.wikipedia.org/wiki/MacOS9

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

Can I install Tiger in my NEW 21.5" iMac ?

Can I install Tiger on my NEW 21.5" iMac ?
Machine bought new - Nov. '09.
While I do like some of the features in Snow Leopard... almost all my existing software plus the Sims 2
games will apparently NOT run (or run well).

Rosetta does exactly that. It was created to run MacOS X programs that only ran on PPC macs to run on intel processors. Rosetta would translate PPC machine instructions into intel instrucions on-the fly.
Classic Mode was a whole separate operating system. Rosetta merely translates PPC to intel so it is generally invisible to the user.
I have used Quicken '05, iMovie HD, AppleWorks and Microsoft Office under Rosetta with no issues. Photoshop 7 was the only program I have that choked and would not run. I would guess that the Sims program would be most likely to not run. They might have an intel update available, I know that Zoo tycoon 2 had a patch to allow for intel processers, The Sims might, too.
Some programs have "fat binaries" with both versions. If you are curious, you can see whether you are running intel or PPC-translated by using the activity monitor.
You don't need to run Rosetta separately, if it is needed it turns itself on, so the programs install normally. In fact, some programs needed Rosetta just to run the installer, the actual software ran on the intels.
I think I have the same machine as you, I just bought my new 21.5" iMac last month. I love it by they way, a DVD that would have taken all night to burn was done in a little over an hour!

Is it possible to install Tiger onto my old iMac G3 ?

I would like to install Tiger onto my old iMac G3 and give it to my grandson. The iMac is presently running Mac OS 9.1 and has 320 mgs RAM and 6 GIG hard drive. The processor speed is 350 MHz. Is this possible ?
Can I use the Tiger OS disks that came with my new G5 or do I have to buy another Mac OS Tiger specifically for iMacs ?
I don't mind buying some more RAM if the above is possible - it is a lovely little machine and runs perfectly right now - I hate just dumping it! Grateful for any help, thanks, Diana.
iMac G3 Mac OS 9.1.x

I don't know if Apple supports the G3 iMacs for Tiger. You may have to use Xpostfacto in order to install it on it. From what I've heard, performance on a 350MHz G3 with Tiger should be adequate. You might have to update your iMac's firmware before installing it, though.
Upgrading the hard drive will help some. Plus, I would suggest you get the memory up to at least 512MB. I'm pretty sure your model iMac will take up to 1GB via 2 PC100 slots.

How can I install Tiger 10.4.11 over Panther 10.3.9

How can I install Tiger 10.4.11 over Panther 10.3.9 ? I tried using a 10.4.2 install disc that I was going to update to 10.4.11, but got message that this would not work on this computer.
Thanks
Bob

Upgrade 10.3 to 10.4 Drop-in Install...
2Z691-5341-A
You must already have Mac OS X 10.3.x Panther installed on your Mac to use this 10.4 Tiger upgrade. Your Mac must also meet the system requirements (detailed below) for Mac OS X 10.4 Tiger.
Compatibility
eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), MacBook Pro, Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD)
http://www.welovemacs.com/m9639za.html

How can I install Mongolian keyboard on my imac

how can I install Mongolian keyboard on my imac

I have some you can try:
https://dl.dropboxusercontent.com/u/46870715/k/MongolianC.zip
You unzip and put the .keylayout files in /Library/Keyboard Layouts and then logout/login and then check their box in system preferences/language & text/input sources and then select them in the "flag" menu at the top right of the screen.

How can I install internet explorer on my iMac?

How can I install internet explorer on my iMac?

WZZZ wrote:
Nope didn't notice that. No idea what it was doing in the list of current discussions--I guess it was one of those old threads that wakes from the dead and reappears out of nowhere.
Yep. The wonderful, wacky world of Jive.

OS 10.6.8 on documents created by Pages 3 will not open They want a Version 4 while my iMac does not install because it needs 4 Pages 10.7. But I can not install 10.7 because my iMac is not Core2 duo ... Funny dilemma!!

OS 10.6.8 on documents created by Pages 3 will not open
They want a Version 4 while my iMac does not install because it needs 4 Pages 10.7. But I can not install 10.7 because my iMac is not Core2 duo ... Funny dilemma!!

You should be able to Save as: iWork 08, but i don't know how it works on Mountain Lion. On my Snow Leopard the Save as window has a part looking like this
Or you can send me the document if you are in a hurry and I save it as iwork 08 for you. Click on my blue name and you'll find my address.

Can't install OS 9 on CRT iMac after firmware update

This is a bit long winded, sorry!
I bought a "working" 2001 iMac, 500MHz, slot-loader, 20 gig HD, CDRW off eBay (the CDRW didn't!) that ran in OS 9. With an external CDRW it worked well, booting the OS discs fine.
The previous owner had left his details on a supposedly deleted OS X account, so I decided to do a clean install to remove them with a supplied disc. I noticed in Utilities that a firmware update was available, 4.1.7, so used it, then did a clean OS 10 install, remembering to install the OS 9 drivers too. I bet you can guess what's coming!- yes, the OE discs wouldn't load OS 9.
Having read postings on this forum (thanks, guys!) I bought a retail version of 9.1 to use, the white/gold one with Sherlock, but this won't load either.
The main problem facing me now is that I can't update to a proper OSX without updating the firmware to 4.1.9, for which I need OS 9 installing!!! (I'd quite like OS 9 back too!)
I've reset the PRAM,and even wiped & reformatted the HD and reinstalled the 9 drivers again using the OSX disc and then powering down (you're not meant to, I know!) and still I couldn't load 9 up, trying both ways to load, just getting the "question mark on floppy" symbol.
Any help, please? Haven't tried target disc mode transfer yet, but could get another machine to do it.
Thanks for your patience with this matter, Mark Mac.

I had a similar problem once (I'll spare you the details!) and what I did in the end was this:
1. Take the hard drive out of the iMac and put it in a FireWire enclosure.
2. Erase it and put OS9 on it down the wire from another working Mac. You don't necessarily have to use the installer CD; you can just copy the OS9 system across from another Mac and it will work as a valid system.
3. If you don't think it installed properly (as mine hadn't) put the installer for the firmware update into the startup items folder of the OS9 installation.
4. Put the HDD back into the iMac and reassemble.
5. Turn it on, whereupon it should automatically start the firmware update, running natively in OS9. Delete the firmware update installer from Startup Items.
6. Update to 9.1 if not already, as that is the minimum for installing OSX
7. Restart in 9.1, introduce OSX install discs and begin installation.
I know all this sounds a faff, but it worked for me and is quite logical if you think about it - not much can go wrong as long as you don't wreck the iMac while taking it to bits. One extra tip: don't install anything later than Panther on an iMac G3, because it won't be happy. And even with Panther, you might want to consider installing using XPostFacto (see versiontracker) which helps older Macs cope.
Good luck - let us know how you get on.
N

Can i install windows 7 on my iMac 2012 using a external drive

Can i install windows 7 on my imac 2012 using a external cd drive ?
Thanks

Welcome to the Apple Support Communities
If you have a Late 2012 iMac (without a built-in SuperDrive), you can use a USB drive to install Windows with Boot Camp and you shouldn't have any problem

Can you install Tiger onto a drive with data?

Hello,
I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
Its a long story but here is a quick summary of why I am attempting to do this:
I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
One other question:
When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
Thanks for any suggestions.

Thanks scb and Jeff,
Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
Thanks for the new safer direction.
[1] Coolmax (CD-311-SATA Combo)
Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
$69.95
http://store.yahoo.com/directron/35enclosure.html
$53.99 at directron

Can I install Tiger in a Dual 500 MHz PowerPC G4?

Can I install Tiger in a Dual 500 MHz PowerPC G4, or is it better to stick with 10.3.9? I'm having some problems so I was going to wipe he hard drive and re-build everything from scratch o I was wondering if migrating to OS X 10.4.9 is worthwhile or even compatible with this PCU. Thanks.

Yes you can run 10.4 on your dual 500, I have a dual 450 (I overclocked it to 550...) and it runs pretty fast. You need a minimum 192 MB of RAM to install it and a minimum 128 MB of RAM to run it. I would suggest having at least 512 MB of RAM when running 10.4.
What problems are you experiencing? If it's just lagging and seeming slow it may just be worthwhile to clean some temp files and clean up your disk. IMHO, 10.4 is a much better system than 10.3, and runs much smoother. I can guarantee you that your system will run much smoother if you wipe the disk clean and put a fresh install of 10.4 on there, and also get a decent amount of RAM in there. After I upgraded my RAM to 1.5 GB, I noticed a substantial difference in speed, and got a lot less spinning color wheels. But one thing that you need to always keep in mind is to KEEP YOUR DISK CLEAN!!! Clean the temp files often and limit your internet downloading. If you keep your computer on all of the time, restart it every once in a while. There's a lot of little things you can do to increase speed in OS 10.4. Use spotlight and recent applications. Fill up your dock. Don't clutter the desktop, etc. There's plenty of articles on the net to help increase speed without adding anything else to your system, just navigating through the OS differently.

Can I install Tiger on Mac OS X 10.6.2 Snow Leopard?

I am using Mac mini and my OS version MAC OS X 10.6.2 Snow leopard and it was as default with my Mac mini,
Can I install Tiger 10.4 on my current Mac mini in different location as dual boot?

Welcome to Apple Discussions!
No Mac can install an older Mac operating system than shipped with it.
The only minor exception is Macs which shipped with Mac OS 9 and Mac OS X, but those ones only could run the Mac OS 9 that came with it and newer one, and Mac OS X that came with it and newer one up to the limitations of the hardware.
Also no Mac can install an operating system disc from a different Mac that is different either in model or vintage.
If you are missing compatibility with your new Mac Mini for a specific application, please check
C!Net Download
http://snowleopard.wikidot.com/
http://www.macintouch.com/specialreports/snowleopard/slcompat.html
for alternative titles, or feel free to ask if someone here knows of one.
Message was edited by: a brody

I have a license for Photoshop CS6 which was installed on a PC that is now beyond repair. How can I install the software on my iMac? I still have the serial number that is registered to my Adobe Id?

I have a license for Photoshop CS6 which was installed on a PC that is now beyond repair. How can I install the software on my iMac? I still have the serial number that is registered to me Adobe Id.

Serial numnbers are platform specific so you will not be able to use it for the Mac if it was initially designated for a PC. YOu will need to perform a platform swap. See the following for information:
Change product platform or language
You can swap languages/platforms for a latest version product if you follow the instructions at the following link:
http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

Can I install Tiger OS on a iMac G3 slot loading DV model?

Similar Messages

Maybe you are looking for