Can I install Tiger this way?
I've just bought a 300mhz Blueberry iBook with 288mb ram on ebay. I want to install Tiger on it. I have a G4 867mhz Powerbook, can I do the following:
Put a new 40gb drive into the PB
Install Tiger on it
Then put the new hd into my new iBook
I have the full procedure for removing the hd from the iBook (55 steps in and out).
Thanks
Dave
I'm not totally convinced this is appropriate. Apple doesn't support Tiger on iBook 300MHz. Panther is the highest supported OS. The OS X Installer will tailor an install to a particular machine - the one it's been run on - not sure how much though - so you may find difficulties later.288Mb is also really too small an amount of RAM for Tiger if you want to do anything other than Internet/Office use.
However, if you do have Tiger Retail you can exchange the DVDs for CDs and use XPostFacto if you're really keen.
Installing Panther would be much more suitable.
mrtotes
Similar Messages
-
I replaced my hard drive on my late 2006 Macbook Pro. I used the disk utility and erased the drive and formatted it to OSX Journaled . When I tried to install the OS from the start up disks I got the error "Can't install on this computer. I have verified the drive.
I have used Super Duper to copy my old drive to my new drive. But I wanted to do a fresh install. How do I go about this?Did you do the Super Duper clone before you tried to reinstall the OS? If so, the original install disc is likely earlier than 10.4.11, and that may be why you are getting the message.
When trying to reinstall the OS, did you select the "Archive and Install" option? If not, you might try that. Here's a link that might help:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1103.html
Good luck! -
Can you install Tiger onto a drive with data?
Hello,
I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
Its a long story but here is a quick summary of why I am attempting to do this:
I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
One other question:
When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
Thanks for any suggestions.Thanks scb and Jeff,
Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
Thanks for the new safer direction.
[1] Coolmax (CD-311-SATA Combo)
Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
$69.95
http://store.yahoo.com/directron/35enclosure.html
$53.99 at directron -
Can I install Tiger in a Dual 500 MHz PowerPC G4?
Can I install Tiger in a Dual 500 MHz PowerPC G4, or is it better to stick with 10.3.9? I'm having some problems so I was going to wipe he hard drive and re-build everything from scratch o I was wondering if migrating to OS X 10.4.9 is worthwhile or even compatible with this PCU. Thanks.
Yes you can run 10.4 on your dual 500, I have a dual 450 (I overclocked it to 550...) and it runs pretty fast. You need a minimum 192 MB of RAM to install it and a minimum 128 MB of RAM to run it. I would suggest having at least 512 MB of RAM when running 10.4.
What problems are you experiencing? If it's just lagging and seeming slow it may just be worthwhile to clean some temp files and clean up your disk. IMHO, 10.4 is a much better system than 10.3, and runs much smoother. I can guarantee you that your system will run much smoother if you wipe the disk clean and put a fresh install of 10.4 on there, and also get a decent amount of RAM in there. After I upgraded my RAM to 1.5 GB, I noticed a substantial difference in speed, and got a lot less spinning color wheels. But one thing that you need to always keep in mind is to KEEP YOUR DISK CLEAN!!! Clean the temp files often and limit your internet downloading. If you keep your computer on all of the time, restart it every once in a while. There's a lot of little things you can do to increase speed in OS 10.4. Use spotlight and recent applications. Fill up your dock. Don't clutter the desktop, etc. There's plenty of articles on the net to help increase speed without adding anything else to your system, just navigating through the OS differently. -
CAN NOT INSTALL ON THIS HARD DRIVE
I am currently running 10.3.9 on my 450 Mhz G4 which has 640 MB SDRAM but when I try to install my Tiger CD's (actually looking for the Archive and install option) I get a message that I can not "install Tiger on this drive". I own the CD's and actually have installed them on my wife's mac mini, so I know that the CD's are good. Thoughts anyone?
Malcolm,
'Will have to check with the previous owner of the mac mini as I do not know if they were purchased seperate from the mac mini or came with that HD. But, thankyou; as, I believe that you have me going down the right road.
Bob -
Can I install Tiger in my NEW 21.5" iMac ?
Can I install Tiger on my NEW 21.5" iMac ?
Machine bought new - Nov. '09.
While I do like some of the features in Snow Leopard... almost all my existing software plus the Sims 2
games will apparently NOT run (or run well).Rosetta does exactly that. It was created to run MacOS X programs that only ran on PPC macs to run on intel processors. Rosetta would translate PPC machine instructions into intel instrucions on-the fly.
Classic Mode was a whole separate operating system. Rosetta merely translates PPC to intel so it is generally invisible to the user.
I have used Quicken '05, iMovie HD, AppleWorks and Microsoft Office under Rosetta with no issues. Photoshop 7 was the only program I have that choked and would not run. I would guess that the Sims program would be most likely to not run. They might have an intel update available, I know that Zoo tycoon 2 had a patch to allow for intel processers, The Sims might, too.
Some programs have "fat binaries" with both versions. If you are curious, you can see whether you are running intel or PPC-translated by using the activity monitor.
You don't need to run Rosetta separately, if it is needed it turns itself on, so the programs install normally. In fact, some programs needed Rosetta just to run the installer, the actual software ran on the intels.
I think I have the same machine as you, I just bought my new 21.5" iMac last month. I love it by they way, a DVD that would have taken all night to burn was done in a little over an hour! -
How can I install Tiger 10.4.11 over Panther 10.3.9
How can I install Tiger 10.4.11 over Panther 10.3.9 ? I tried using a 10.4.2 install disc that I was going to update to 10.4.11, but got message that this would not work on this computer.
Thanks
BobUpgrade 10.3 to 10.4 Drop-in Install...
2Z691-5341-A
You must already have Mac OS X 10.3.x Panther installed on your Mac to use this 10.4 Tiger upgrade. Your Mac must also meet the system requirements (detailed below) for Mac OS X 10.4 Tiger.
Compatibility
eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), MacBook Pro, Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD)
http://www.welovemacs.com/m9639za.html -
Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated
Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself. -
We have several licences of Adobe Photoshop Elements V9 can we use the same licence key for latest version or what version can we install is this key???
We are Gouvernment and we use Windows 7 64 bits edition with office 2010.
Thanks.Hi Denis, if you have license of Photosho Elements V9 then you can only install V9, please check the download link: Download Photoshop Elements products | 9, 8, 7. Please also check System requirements | Adobe Photoshop Elements
Atul_Saini -
Can I install Tiger on Mac OS X 10.6.2 Snow Leopard?
I am using Mac mini and my OS version MAC OS X 10.6.2 Snow leopard and it was as default with my Mac mini,
Can I install Tiger 10.4 on my current Mac mini in different location as dual boot?Welcome to Apple Discussions!
No Mac can install an older Mac operating system than shipped with it.
The only minor exception is Macs which shipped with Mac OS 9 and Mac OS X, but those ones only could run the Mac OS 9 that came with it and newer one, and Mac OS X that came with it and newer one up to the limitations of the hardware.
Also no Mac can install an operating system disc from a different Mac that is different either in model or vintage.
If you are missing compatibility with your new Mac Mini for a specific application, please check
C!Net Download
http://snowleopard.wikidot.com/
http://www.macintouch.com/specialreports/snowleopard/slcompat.html
for alternative titles, or feel free to ask if someone here knows of one.
Message was edited by: a brody -
Keep getting error message "FCE" can't install on this disk. A newer version of this software already exists on this disk. Have remove all FCE elements with no success.
http://www.digitalrebellion.com/fcsremover/
-
tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
dsharp14 wrote:
tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
What are the specs on your Mac? Top Left Apple Symbol > About This Mac > More Info > Hardware Overview
Thanks
Pete -
i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt
Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks). -
When I try to work with some photos Imovie gets stuck and then it stops to work at all. It happens only with some specific photos,is there a way to repair them?I can't go on this way,help me please
Hi,
The movie is probably MPEG format.
QuickTime Pro and iMovie cannot transcode audio contained in MPEG movies.
Try to convert with SimpleMovieX or MPEG Streamclip instead.
http://www.aeroquartet.com/SimpleMovieX/
http://www.squared5.com
Regards, BJ -
When you click to play the game, the window shrinks down and when you expand it the writing isn't there it only shows the small part that does open. Most of the games can't be played this way, you can't read the chat or access most of the buttons!!! It is just the newest version of Firefox because it works fine on my other computer that hasn't been updated and it also works fine in IE.
See:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
*http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
* http://kb.mozillazine.org/browser.link.open_newwindow
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction
Maybe you are looking for
-
Ipod freezing when connecting to pc
i just purchased a 30 gig ipod this summer, but when i plug it into my pc, the ipod lights up and freezes on the first menu...the ipod stays on this screen until the batteries drain. This has happened all but one time when plugging it in. i can't eve
-
How to do this in Oracle forms
hi Freinds I am Using This Code in Oracle Forms Declare var_m varchar2(20) := 'employee_no'; Begin select var_m into :records.column_1 from pay_employee where employee_no = 1 and company = 10; End;Now this is Selecti
-
Have installed two of the new apps (Premiere and Photoshop) and I see nothing on the menu of a WIndows 7 machine. I have the CS5 folder, the CS6 folder but no entries for CC. The control panel says they're installed but I can't run them from there.
-
I install BI and can see Oracle's example at http://localhost:9704/analytics . However, I need to show the reports and charts of this example in an ADF application using Jdeveloper or an HTML page. How to do it? Thanks.
-
i updated to os 2.0 used it made some apps installed apps for 2 days i used it running 2.0 turned the power on today and now it says 1.0.8.6067 why? i did not download this ? i dont get it .....