Can I install Windows 7 from a USB stick even though I have the Superdrive?
I have an iMac 21.5inch from Mid 2010 and it currently runs Snow Leopard 10.6.8. I have just purchased the upgrade to Mountain Lion but I have not received the code to install it yet. When I do install it, I'm planning to dual boot my iMac to have Mountain Lion and Windows 7 on it. I have the Superdrive built into the side of the iMac but unfortunately I have run out of discs to burn the official Windows 7 ISO into (from Digital river). The discs cannot be rewritten on because it's a DVD-R so I was wondering if I could install from my 8GB USB stick even though I have a built-in Superdrive. I heard there's an option to do this and I was also wondering if by doing this option, will it automatically put the Windows support software onto it as it says on the second option "Download Windows Support ....."
Also, I have heard my specific iMac can experience a black screen when installing Windows and you need to download some stuff and put it in your USB as it says on the article. Is it possible for me to make my USB bootable by doing the first option in the Bootcamp Assistant as well as put the Windows support software I downloaded from the black screen article into it?
Read the Boot Camp Installation Manual http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf.
Similar Messages
-
Why can't i see documents using adobe reader even though I have the most updated version?
Why can't I see documents using adobe reader even though I have the most updated version?
Hi lawalton,
Please tell me a bit more--what happens when you try to open your files in Reader? Are you getting an error message? Do they open, but don't display correctly?
I look forward to hearing back from you so we can get this mystery sorted out.
Best,
Sara -
Hi - I've brought my iphone 5 but cant seem to download my music from my itunes account onto it. I've downloaded the latest version of itunes as i heard this could be a problem but still no joy. The phone tries to sync when i plug it all in to the pc and even has the capacity bar showing about 12gb of audio but there is still nothing downloaded onto the phone.
The only thing i can see that might be causing the problem is that when i go into my itunes account it doesn't show that the iphone 5 is an option is the 'managed device' section but i dont know how i can add the new iphone 5 to this....
Can anyone please advise me on what to do ?
Many thanks !
RazorYou can only sync to one computer/iTunes library. To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
How can I install Windows 7 by USB? MacBook late 2008 10.6.8 Boot Camp 3.0.4
Someone please help...
I have tried software update and no luck. I think my Boot Camp on Mac 3.0.4 is not showing me the right option on creating a USB installation. It asks me to load Windows 7 CD when I don't have it, I bought it online... Every download I tried from Apple is .exe and I am losing hope on this one...You can only install Windows from a USB with one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and later).
- iMac (Late 2012).
- MacBook Air.
If you bought Windows in Internet and you got it in a ISO image, you can burn it into a DVD. Simply double-click the ISO image, open Disk Utility, right-click the ISO image in the sidebar and burn it -
How is it possible to install Windows 7 via USB-Stick on a 2009 iMac with a broken DVD-Drive?
Hello,
i have a 2009 iMac and Windows 7 64bit in my Boot Camp.
Windows is now slow and needs to be reinstalled.
The problem is the DVD-Drive in my iMac is broken, so i can't use my Windows-install-DVD.
How can i reinstall Windows 7 via USB-Stick on a 2009 iMac with a broken DVD-Drive?F3Spirit wrote:
Thank you,
I try this.
Also check this one out
But i think you would be far better served by installing Windows in a virtual machine. -
how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????
To sync photos from a Mac or Windows PC to your device using photo applications
Make sure you have the latest version of iTunes installed.
In iTunes, select your device's icon in the Devices list on the left.
Click the Photos tab.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
Click Apply.
To sync photos from a folder on your hard disk to your device
Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
In iTunes, select the device icon in the Devices list on the left.
Choose "Sync photos from."
Select Choose Folder from the pop-up menu and choose your main image folder.
Click Apply. -
When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os X" even though I have the latest update 10.5.8 of Mac os X?
The install icon has this sign on itmoose0422 wrote:
You can't install Lion over Leopard. To install Lion, a requirement is Snow Leopard. So you can either upgrade to Snow Leopard first or you can make a bootable Lion install disc and use that to wipe your hard drive and install a fresh copy of Lion.
So to make a disk would require you to purchase Snow Leopard and upgrade to 10.6.8 so you can use the App Store, unless you have access to another computer to download it from with your Apple ID. Remember it is about a 3.4GB download.
Good Luck -
6th gen nano keeps displaying no radio signal even though I have the earpiece plugged in. Can anyone advise? Thanks
Hey there larkandwarbler,
It sounds like you are experiencing multiple issues with this iPod Nano 5th Gen. From what you are describing it seems we can isolate this to either the software or the hardware on the device with a couple of simple steps assuming you have tried another set of headphones. First, reset your iPod with this article:
How to reset iPod
http://support.apple.com/kb/HT1320
How to reset an iPod with a Click Wheel
iPod models with a Click Wheel include:
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If you are able to reset it, but the issue persists, or you are unable to reset it, I would next attempt restoring it with iTunes:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Thank you for using Apple Support Communities.
Regards,
Sterling -
why do all of my incoming calls on my iPhone 5c say they are from unknown, even though I have the person calling already in my contacts?
Caller ID can also be turned off on some networks e.g. iOS has a setting for UK phones to turn it off. You should try calling from a number you know is not blocked from sending the caller ID.
-
Even though I have the Pages 5.0.1 installed as the default software, I still receive the message “You need a newer version of pages to open this document.” HELP!
Please clarify....
Mac OS X (10.4.6)
What your system profile shows yet, you posted in the ML forums. -
My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.
Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
My ipad is no longer showing all my vidoes, even though i have the option set to show all, even those that are in my cloud. Any suggestions??
Close the videos app and launch it again.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
if they still don't show up after you launch the app again, try resetting the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Trying to Install Lion from a USB stick.
I purchase Lion from the App store & set up Lion on my Macbook, on a partition on my Exterior Hard Drive. Also wanted to install Lion on my early 2009 Macmini. I want to install it, on a partition on the Macmini. A clean install of 10.6.8. is on that partition.
Instead of downloading it again, I put the "InstallESD.dmg" on a 16 gig USB stick. I boot into the Mac OSX USB Stick Install, then near the end of the installation, a error message said ''Cant Download the Additional Components Needed to Install Mac OSX''
Has any one got any answers to the problem?Are you connected to the Internet throughout the process?
Pete -
1. I burned a small hole in my screen, is that fixable/replaceable? 2. Even though I have my 15" MacBook Pro set to open to empty screen when I open Safari, it constantly opens multiple previous pages. It doesn't seem to matter what I do it just reverts back to opening multiple pages. Major security risk, my bank pages have popped back up after my computer has been shut down, account numbers and all. I took my computer to an Apple store and the genious there tols me... "honey, you can't hold your laptop on your lap, that's the problem, it's getting too hot" he honestly said that. Could someone please help me? Thanks
Apple doesn't call its portable machines 'notebooks' instead of 'laptops' for nothing - using a MacBook Pro in your lap can cause some burns on your skin, poor ventilation, etc. So use it on a hard flat surface - not your lap, pillows, bedclothes, etc.
As for burning a hole in your screen, you'll have to revisit the Apple Store and see how much they would charge for a new screen. It's likely to be a bit expensive.
And if you've Safari set to re-open tabs when you restart, you can disable this feature -> Safari-Preferences-General.
Good luck,
Clinton -
Why can't I boot from a USB stick Ideapad Laptop?
Hi
I just bought new Lenovo IdeaPad Y510P and i've got a problem with installation an Windows 7 64x from a bootable stick.
The OS on laptop is FreeDOS and from this level a cannot install the windows os. The DOS system won't boot from usb stick and there's no BIOS so i can't set the boot order.
As i try to run setup.exe from d: drive(which is flash drive) i receive message that i cannot open this file in DOS system.
I prepared the USB stick according to this solution:
1) Open a Command Prompt with Administrator privileges in either Windows 7 Pro or Windows 8 Pro.
2) Insert the target USB boot media device into an available USB port.
3) Type "DiskPart" in the command prompt.
4) Type "List Disk” (make note of the disk number of the target USB drive).
5) Type "Select Disk X”, where X is the target USB drive noted in step 4.
6) Type "Clean”.
7) Type "Create Partition Primary”.
8) Type "format FS=fat32 quick”.
9) Type "Active”.
10) Type "Assign".
11) Type "list volume".
12) Type "Exit".
The error still persist and i can't go any further with win installation. I strongly asking for help and advice.
Team please assist.
Solved!
Go to Solution.Hello and welcome,
Are you booting in UEFI or legacy mode?
IIRC if you want to boot and install in UEFI mode you need to format your USB stick FAT32 (which you did) and enable CSM support in BIOS.
You should also be using SP1 media. If pre-SP1 some additional file manipulation is required to get the installer to boot in UEFI mode.
Installing Windows 7 in native EFI mode from USB
If you're booting and installing in legacy mode (which I suspect you are if running FreeDOS - just a guess on my part) you need to format that USB flash drive NTFS.
(You don't say, but I also assume you've copied the contents of a Win 7 install ISO or DVD to that flash drive...)
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Maybe you are looking for
-
Plan Task functionality in 11.5.10.2
Hi all! I would like to ask how the Task Status, as it appears on the Warehouse Control Board, is controlled. Initially, in 11.5.9, the Tasks used to appear with the status of 'Pending'. After a recent upgrade to 11.5.10.2 the Tasks appear with the s
-
I can't get Office 2011 to work, which apple apps can I use instead
My Office 2011 has stopped working , I have uninstalled it and reinstalled but it still wont work. Are there any apple Office suites that I can download and install or arer there any other Office suites I can use?
-
Join Istore table with AR tables
Hi Gurus, How to join ibe_msites_b table with AR table. I am trying to get list of all customers from different mini sites. These are the AR tables i am using HZ_Cust_Accounts HZ_Parties Regards,
-
I have upgraded to iLife 08 and want to sell on my copy of iLife 06. I can't find a product code anywhere for it on the disc or packaging. In fact all I have is the disc in a paper c.d. cover. Is it possible to re install it on another computer not b
-
I've tried everything in other posts and no luck. I'm consistently crashing. The page starts to load, looks promising then crashes. Any suggestions? Date/Time: 2009-01-17 15:19:59.835 -0700 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: