Can I install Windows 7 with this version "Windows 7 Home Premium SP1 64bit (Full) System Builder DVD 1 Pack"

Its so hard to tell if I am ordering the right version, Will this version run smoothly and well, and does it have full support for drivers and etc.
Thanks For The Help

That sounds like the right one to me.
http://support.apple.com/kb/HT1899
Stefan

Similar Messages

  • Windows 7 Home Premium SP1 64bit (OEM) System Builder

    I am trying to build by own custom PC and make it easily upgradable in the future.
    I am not sure what to get for the OS. I heard that Installing:
    Windows 7 home premium sp1 64-bit (oem) system Builder
    will tie with all my hardware indefinitely (that is my mobo, hard drive, processor, graphic card.etc..).
    So in the near future if I want to change out my GPU or CPU can i swap it out without a problem?
    or HD will i need to by another win 7 OS system builder or can i reinstall my already bought OS without a problem
    as long as the mobo has not been changed.
    I dont want to buy a $400 dollar for a retail OS...its $300 to much then im already spending for my current setup. And I dont want to buy another pre-built PC cause working on swapping any of their parts will void warranties if swamping can be done in the
    first place.
    Please Help would be greatly appreciated!

    they tattoo the MB so the MB and OS will recognize another HW attached to OEM PC or laptop. So if you upgrade another HW, you will facing issue Bluescreen or Windows not genuine. If you go to some Manufactured website, the only thing they allowed to upgrade
    for OEM PC either HDD or RAM only. And one more thing, you cant upgrade your OEM OS to the higher version, unless they provide the link to upgrade or any special promotion.
    Based on my experience, if your GPU failure, they will only change to the same GPU or upgraded version if any. They will not allowed you to do it if there is no HW failure, and tattoo MB has different standard price for different manufactured
    I think if you thinking about Microsoft support , they have a lot of option, forum is always open to help. I don't know what kind of support that you expect. For me, I prefer online support, so I can learn something from my issue and
    its free. TS for OS issue, you still can do it by yourself, some forum member, MVP or moderator will give you the step to fix this issue. And the ultimate thing we do to eliminate OS issue if some step didn't help is restore or reformat only.

  • Can't Install Windows 7 Home Premium on my new Pavilion dv6

    Well guys I have a serious problem here. I recently bought myself a new HP notebook and as I took a first glance at all the unnecessary programs and applications that were allready installed I decided to reinstall windows from the start. So i downloaded a free Windows 7 Trial and burnt the image to a dvd. I thought I could activate the trial later on with my genuine Windows 7 key on the back of my notebook. But the win7 setup didn't even get me that far! After that I had formated the HDD during the setup process it just get's to "finishing installation". This is where the following error message pops up:
    "Windows setup could not configure windows to run on this computer's hardware"
    All I can do here is just click "ok". Then the computer reboots and it says "the windows installation wasn't finished before" or so..
    Please, please help me! I have no idea how to solve this problem! Could maybe a hp employee help me out?
    This is my product:
    HP Pavilion dv6-7145ez (B8G15EA)
    further details here: http://www8.hp.com/ch/de/products/laptops/product-detail.html?oid=5293000
    I thank everybody for solutions

    Hi:
    Try using this free partitioning and formatting software on your C:\ drive first.
    http://www.partitionwizard.com/free-partition-manager.html
    Did you use this method of making a W7 DVD that I have posted for dozens of users who have all gotten W7 to install this way?
    If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
    Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
    Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
    http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
    Use the 25 character product key on the PC to activate the installation.
    The key will activate either a 32 or 64 bit installation.
    Then go to the PC's support and driver page to install the drivers you need.
    Link to the W7 ISO file downloads is below.
    http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
    Paul

  • Can I install windows 7 home premium with parallels 8

    Getting confused here.  I read that Parallels 8 will not be supporting Windows 7 any longer. But will it allow me to install it on my MacBook Pro? I have machine embroidery software that uses 7 and is questionable if it will work on Windows 8.

    Not sure where yo may of read that but it is totally false. Or Parallels would be losing tons of money because no one would ever buy it or upgrade the copy they now have.
    Parallels is a Virtual Machine software program and should support many version of Windows along with Linux and even Mac OS X. All other VM software programs sure do. VMware Fusion and Oracle's Virtualbox.
    gbsyl wrote:
    Getting confused here.  I read that Parallels 8 will not be supporting Windows 7 any longer. But will it allow me to install it on my MacBook Pro? I have machine embroidery software that uses 7 and is questionable if it will work on Windows 8.

  • I have a 2008 iMac with Bootcamp 5.0 and I am trying to install windows 7 home premium 64 bit on it. How do I go about this?

    I have been having trouble installing Windows 7 Home Premium on my 2008 iMac while using BootCamp.  It has OS X Mavericks 10.9.1.  Every time I try and use bootcamp I come across a blank black screen with a flashing white curser in the top left hand corner after it has restarted.  If anyone knows a solution to this that would be great.

    http://www.youtube.com/watch?v=OM2495dmO0I
    more options
    https://www.google.dk/search?q=installing+windows+7+in+bootcamp&oq=installing+wi ndows+7+in+b&aqs=chrome.1.69i57j0l5.6428j0j8&sourceid=chrome&espv=210&es_sm=93&i e=UTF-8

  • How to Install Windows 7 Home Premium (32bit) with No legacy option in BIOS setting. Just UEFI. in Acer Aspire E1-410 ?

    I just broke my older Acer Aspire 4752G.
    I just backup entire Partition my Windows 7 Home Premium (32bit) with Acronis True Image Home 2014 BootCD Premium.
    intend to restore in this brand new Acer Aspire E1-410.
    Acer Aspire E1-410 don't have Legacy Option only UEFI
    Acronis True Image Home 2014 BootCD Premium fully support EUFI but alas my Original Windows don't boot
    So I intend to use repair BootRec command prompt
    These CD Windows won't detect in these Acer
    So I call Acer Technical Support They said :
    there is NO OTHER WAY to change this UEFI to LEGACY MODE (Build-in Bios mode CANNOT change other than UEFI)
    you must install via DVD who FULLY SUPPORT UEFI -> Windows 8 or Windows 8.1 (ONLY in x64bit mode).
    I hope you can resolve these for me.
    Thank you.

    It is possible to install Windows 7 Home Premium 32-bit from DVD to a UEFI based hardware, but must be done using an answer file. It may or may not work if you are using a recovery DVD. Either way, the OS is not supported on that hardware.
    Windows 8 32bit is supported on UEFI hardware.
    The problem with Win7 32bit on UEFI is a problem in the bootloader. The OS cannot boot because the bootloader cannot find the OS. I had suspected it may be possible to get the OS to boot by using BCDBoot, but since it isn't supported I have not put in any
    effort to determine the method of doing it.

  • I need to install windows 7 home premium on my Macbook Pro.  My Macbook Pro is a Core 2 Duo running at 2.26 Mhz.  Do I install the 64bit version or 32bit?

    I need to install windows 7 home premium on my Macbook Pro.  My Macbook Pro is a Core 2 Duo running at 2.26 Mhz.  Do I install the 64bit version or 32bit?

    64

  • If I were to buy the 7 Home Premium SP1 64bit, System Builder OEM DVD 1 Pack from Amazon to install Microsoft Windows 7 on my Mac, would it be compatible with my computer when I put it in bootcamp? (I have all of the current software updates)

    If I were to buy the 7 Home Premium SP1 64bit, System Builder OEM DVD 1 Pack from Amazon to install Microsoft Windows 7 on my Macbook Pro, would it be compatible with my computer if I put it in bootcamp? (I have all of the current software updates)

    In order to run Windows Applications, you must own the applications and, since they require Windows, you must own Windows. There are technologies like wine that will allow Windows applications to run without Windows, but they tend to be flakey at best.

  • Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

    Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
    I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
    KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
    At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
    I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
    I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537  HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
    If you need more details, please tell me & Thanks in advance

    Checkout this Microsoft article: http://support.microsoft.com/kb/976982 
    It has some resolution steps that may help.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Can i use Microsoft Windows 7 Home Premium SP1 64-bit - OEM for bootcamp?

    Someone suggested to use
    Microsoft Windows 7 Home Premium SP1 64-bit - OEM for bootcamp.
    Can i use Microsoft Windows 7 Home Premium SP1 64-bit - OEM to use in bootcamp to install windows 7 on my mac book pro 13 inch?
    thank you.
    PS: i bought my macbook pro 3 weeks ago.
    Also, is there any other windows 7 installation CD that is cheaper?
    thank you.

    Yes.
    OEM just means that the Windows OS is dedicated to that computer only. If you sell, replace or throw away the computer you use it on, the Windows CD/DVD goes along with it. (According to the Licensing dialog)
    Just do a Yahoo/Google search for prices is the only way to find it cheaper. Or keep an eye on your favorite web store for sales.
    If you are in college and have an .edu e-mail account thru the college then Microsoft has it for about $30 US. And other deals also.

  • ISO for re-installing Windows 7 Home Premium Russian x64 with key on HP laptop (x32 installed now)

    I have HP notebook with Windows 7 Home Premium x32 installed. I have added memory to laptop, but OS does not see it because 32-bit limitations. Laptop has label with key. I have no any CD/DVD included with OS. Where I can find Windows 7 Home Premium Russian
    x64 ISO to reinstall with key from laptop label?

    I just had talk with HP Support (I have Care Pack). You are not absolutely right.... Key from label (OEM on my laptop) is not binds to Windows bit architecture. HP has placed order today for media kit with x64 version of Windows 7 Home Premium included
    for me. It is free)).

  • Where can i download windows 7 home premium x64 ?

    Hello i have serial key for windows 7 home premium x64 norwegian version. It used to be easy to download from microsoft but now i cannot find the link where can i get this? i want windows 10 but you have to upgrade from there so first i need a new disk
    to install it from please help.

    Find the below Download Location for your references.
    Windows 7 ISO downloads includes SP1 (English Version)
    At the sae time download the required device drivers for your laptop.once you download the iso image of the o/s , you can burn it in cd /dvd with the gelp of some good software like roxio,nero etc.

  • Satellite M40: installing Windows 7 Home Premium

    Hi,
    I'm trying to upgrade my Satellite M40 (PSM40A-03K009) to Windows 7 Home Premium but towards the end of the installation, my notebook reboots and freezes up trying to start Windows 7.
    I've rebooted in safe mode and it seems to be getting stuck loading \windows\system32\drivers\classpnp.sys.
    I've tried everything I can think of: running start-up repair on installation disk, installing latest versions of drivers, updating BIOS, reformatting disk, etc but nothing seems to work.
    Can anybody help?
    Cheers
    Rob

    Thanks for your thoughts.
    You're both probably right about it being too old (although it does have a 2GHz processor & 2GB RAM) but I thought it worth a try as I have a spare copy of Windows 7 and much prefer it to XP (I have it running on my newer Toshiba laptop).
    I'll try a couple more things then restore XP if I can'?t crack the problem.
    Any idea what CLASSPNP.SYS is meant to be controlling? It seems to have something to do with SCSI controller but I don'?t think this pc has any SCSI devices.
    Cheers, Rob
    Message was edited by: Rob Hoar

  • Installing windows 7 Home premium 64-bit, cannot complete installation

    Hello,
    I am currently trying to install a genuine windows 7 home premium copy on my iMac 27" using boot camp assistant 3.0.1 on a new partition. Partition is correctly made, installation proccess was smooth but when windows restarted to complete installation everything goes black. When I use safe mode it tells me that windows cannot complete installation on safe mode, and prompt me to reboot and start windows normally. The windows logo appears again but then everything goes black. I removed the partition and repartititoned the disk with boot camp, and tried installing again. Now it's been about half an hour and after the installation reboot, and the screen is black.
    Any ideas?
    thanks in advance.

    Sorry,
    Is this an edu download ISO that you burned to DVD yourself, or retail copy?
    No reason to redo partition, when / if you do boot 7 HP, you can always just do clean install, there is nothing wrong with the partitions.
    There definitely are problems with 27" iMac and Windows 7 support, and BC 3.0 came out last... July actually, so almost a year, and before RTM (even though "frozen" W7 went through some major changes later).
    The worst scenario is when BCA freezes or is killed, that can leave the entire drive and Mac OS inoperable (backups are imperative).
    So if you burned the DVD yourself and used Disk Utility, reburn at reduced (2x) speed is all I can think of.
    More problems await you AFTER 7 is installed and Apple Boot Camp drivers mess things up again!
    See the very last post here (3 pages):
    Install 7 iMac 27": Graphic driver glitch

  • I recently downloaded Parallels 9 to my imac so I could install Windows 7 Home Premium and had no trouble everthing is working fine the only question I have is is there a benefit to migrating the 2 together and what happens when I do Thanks.  Ricco

    I recently downloaded Parallels 9 to my imack so I could install Windows 7 Home Premiumwith no problem and everthing is working fine, and I was thinking of Migrating the 2 2 and was wondering what benefits there would be and what happens when I do.

    Windows 7 will peer down through the VM and remember what hardware the VM is installed on. Migrate the VM to different Mac hardware, and on first boot, Windows 7 will advise you that you are not using genuine Microsoft Windows. It will then treat you as though it believes you misappropriated it.

Maybe you are looking for

  • IMac 5,1 Backup and extension of hard drive strategy

    I have an iMac 5,1 500 GB, 20-in running Time Machine on a Seagate 1TB FreeAgent. Both have worked great since I got them. I recently decided I needed a more robust backup strategy and also needed to consider extending my hard drive space. After rese

  • Idoc, ale, badi

    hi guys i need comprehensive tutorials on ale, idoc, and badi. thanx regards timmy

  • Image Capture and iPhoto recognize my camera as a device but won't display photos

    Everything worked fine under Mavericks.  Might have to revert to that again if this problem isn't fixed.  I'm downloading the Mavericks installer as I write this.

  • EDI-810 Invois error

    Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'ABC.Orchestrations.ABC810Orchestration(8b18a26d-a248-06g0-c3f3-8345c1aa820r)'. The service instance will remain suspended until administratively resumed or ter

  • Can we delete user defined screenfields in SE51 ?

    Dear all, I am using SE51. If i want to remove extra / unwanted ITAB-screenfields, How to delete ? I use 'Invisible' option. Is there any another solution ? Thanks...