Can i install Windows 8.1 on a 27 inch, iMac late 2009 model? Is this supported by Apple?

Hello, before i start this endeavour is it supported by Apple to install Windows 81. on a late 2009 iMac 27 inch model? I get confused by all posts out there including on Apple's website. I'm happy to try it out but want to be sure that if i create a second partition for windows, my primary partion with MAC-OS does not get impacted in any way.
Thanks,
Martijn

Hopefully this isn't confusing, look under iMac http://support.apple.com/kb/HT5634?viewlocale=en_US

Similar Messages

  • Problem installing Windows 8 via Bootcamp on MacBook Pro 13 (late 2009).

    Hello,
    I've installed Windows 8 Pro on my MacBook Pro 13 (Late 2009) which does not support Windows 8. I've started installing Windows 7 via Bootcamp, then interupted the installation and pluged-in the Windows 8 Disk, and after formating the partition, I've installed Windows 8 64-Bit.
    Here is the problem. The Windows works fine, BUT after restart when I hold 'Alt' and choose EFI Boot (Windows 8's partition), Windows 8 starts loading but then suddenly there is a white flash and it restarts again. So after shut down or restart I cannot boot it.
    Do you think that this is because I do not have Bootcamp installed on the Windows 8?
    I've downloaded the supported software for Windows 8, but when I click setup.exe, it is giving me the following error:
    This version of Bootcamp is not intended for this computer model. I've been trying to install it for more than 78 hours, so I'll be extremely gratefull to whoever help me. Thank you in advance.
    P.S. Mac OS X partition boots fine.

    If it is really not possible, I get it. But there are plenty of people that are running Windows 8 on the same model, that is powerfull enough to run Win 8. I'm actually running it, but until shut down or restart . Can't I edit Info.plst file alternative for Windows 8 like I did to allow BootCamp to image burn my USB on my model? I mean my model is same as the next one. I can't see why the drivers for mid 2010, won''t work on mine...

  • I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.  I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

    I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.
    I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
    I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
    Is there anyone who can give me some pointers ?

    Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
    For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
    To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
    At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
    Good luck!

  • Can't install Windows 10 on Yoga 2 13 inch

    Hello, I have a Yoga 2 13 inch with the 500GB Hybrid drive.  When i try to upgrade to Windows 10, either via internet connection or USB drive created with MediaCreator, I get the message: "You can't install Windows on a USB flash drive using setup" It seemt that setup is seeing the Hybrid drive's 32GB of flash as if it were an external USB drive. Anyone know how I can fix this? Thanks,Ski

    Yes, you should check the Disk Management also again. The SSD should be displayed there, if it is not being displayed then change the Boot Mode from UEFI to Legacy and try to install windows. (And Yes SecureBoot needs to be Disabled)
    Ideally, the SSD should be initialized first from the Disk Management (But after all tries if you still can't see it, just try the above method.
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

  • HT5634 Installing Windows 7 on a Imac, late 2009 model

    I have an IMac 24 inch, late 2009 computer.  Which version (32 bit or 64 bit) will I need to run Win 7?

    The Late 2009 iMac was available in 21'5 or 27-inch, not 24-inch. If you have a 24-inch iMac, you need a 32-bit Windows version because it doesn't support 64-bit Windows versions.
    If you have a 21'5 or 27-inch iMac, you can install a 64-bit version

  • Would installing an SSD be recommended for an iMac (late 2009 model)?

    Interested in feedback on possibly installing a solid state drive on an iMac (2009 model) vs upgrading to a new iMac.

    The gripe doesn't bother me, but it is not permitted on these forums. Read the Terms of Use again or see Community etiquette.
    Anyway, on to your issue. Please give this a try:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • How to install Windows 7 in Mavericks on my Mac mini Late 2009.

    After I upgraded to Mavericks from Lion, I can't edit info.plist file to enable the 'Create Windows bootable USB flash drive' feature in Boot Camp 5.1. Who can help me, please?

    See > https://discussions.apple.com/message/23620608#23620608

  • How can I install Windows 8.1 Enterprise on my Macbook Pro  With BootCamp?

    How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

    Hi Armin.S,
    I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Mac Basics: Using Windows on your Mac with Boot Camp
    http://support.apple.com/kb/HT1461
    Apple - Boot Camp Support
    https://www.apple.com/support/bootcamp/
    Regards,
    - Brenden

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

  • How can I install windows 8 on a mac without superdrive?

    Hi there.
    I have an old Macbook pro (early 2007) which is still quite good, except from the superdrive which got broken.
    I would like to completely wipe out OSX (Lion) from that and install Windows 8 instead.
    Problem is, I cannot install it from optical drive, since it's broken (and plus, I don't have access to an external drive).
    Is it even possible to install windows 8 from USB on this computer? If so, what should I do?
    Thank you!

    You can only install Windows from an external disc drive or an USB drive in one of these computers:
    - MacBook Pro with Retina display.
    - MacBook Air.
    - iMac (Late 2012).
    - Mac mini (Mid 2010 and newer).
    As you don't have any of these computers, you need the SuperDrive to install Windows 8. In your case, you have to install a SuperDrive in your MacBook Pro in order to install Windows by using Boot Camp

  • I can't install Windows 8.1 on my Imac with Mavericks using Bootcamp. Why?

    I can't install Windows 8.1 on my Imac 27" with Mavericks using Bootcamp. Why? I first did all the software updates needed, downloaded the driver software to a 32Gb flash drive formatted as FAT32, fired up Bootcamp Assistant, inserted the Windows 8.1 Full version 64 bit installation DVD as requested, and got as far as partitioning (tried this at 82 Gb for the Windows partition), then the MAC rebooted but halted before getting to the login page. Then a black screen came up with the error message: 'non-system disk - Press any key to reboot'. I did this and nothing happened. I was forced to shut down forcibly then restart with my finger held down on the option key. Then a screen came up with two icons: the macintosh HD icon and the Windows DVD icon. I double-clicked on the Windows DVD icon and the MAC came up with another black screen and error message: 'CDBoot: Couldn't find BOOTMGR'. Had to shut down forcibly again and restart as before, this time ejecting the Windows DVD first. Then I repartitioned my MAC back to all OSX. What the **** do I do now? Applecare couldn't help me beyond this point. They said to contact Microsoft. I notice a lot of other MAC owners have had similar problems.
    Please help? tagjsmith.

    bootcamp does not currently support windows 8.1

  • How can i install windows game on my mac actually i download a cricket game 2009 how i can inastall in mac

    how can i install windows game on my mac. actually i download a cricket game 2009 how i can inastal in mac

    It will never run in OS X. You need to install Windows on your machine.

  • Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

    Hi,
    I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
    Anyone else had problems or success with this?
    Thanks in advance.

    9thdoc wrote:
    I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
    Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
    You need the Snow Leopard installation disk or a replacement for it.

  • LaserJet 2550n network printer on XP host PC, can't install Windows 7 client laptop

    Have Color LaserJet 2550n network printer connected to XP host PC. I can't install  Windows 7 client laptop for printer. The wireless network is fine, I can access documents back and forth, merely the printer doesn't work and there's no way to download 64bit drivers for this printer from HP. 

    Resolved, not solved. 
    I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

  • Can I install windows home server 2011 on a mac mini?

    Hey guys and girls...
    Can I install windows home server 2011 on a mac mini? If so how?

    WHS is 64-bit. Genius are really not versed in Boot Camp or Windows, let alone anything not on the "approved" list of Windows versions.
    Most of the problems are with burning ISO, or the SuperDrive. It should have seen the NTFS partition. Disk Utility is known to be trouble, burning it on your Mac Mine but iwth Windows 7....?
    Seeing you have Windows 7, format the partition to NTFS 160GB you want and then exit and boot WHS installer.
    Or run the install from Windows 7.
    In past, WHS supported TimeMachine, streaming video, supported iTunes (that was broken/disabled it seems by Apple with 10.0), as well as even SuperDuper backups.
    Main idea is to have some network attached drives.
    Netgear ReadyNAS Ultra2 Review
    Newegg - HP StorageWorks X310 Windows Home Server
    I have both a ISO and Burned it to a dvd useing windows 7 built in ISO burning software, Its a 64 bit copy (got from microsoft download website from my dads microsoft account).
    It is enouth for the OS but it runs slowish on the mac mini (latest core 2 duo 2.4ghz model) The Idea was to have it backup my pc and laptop to a usb drive and act as a media centre pc (connected to av receaver and tv and on a gigabit network with a 2TB nas)
    Since it looks like this may not work, whats the best way to make it into a media centure? mac osx? windows 7? plex? whats best and good?
    I'd avoid USB like the plague. Why not use your PC instead? If I was going to use a Mini for WHS, I'd just use the Mini solely for Windows and not have OS X (you can boot OS X off an external drive anyway).

Maybe you are looking for