Can i install Windows XP on this version

Can I install Windows XP on this verison OSx Lion on my new iMac?

XP isn't supported in Bootcamp anymore. You can install it under VMware Fusion and probably Parallels.
Regards,
Captfred

Similar Messages

Can I install Windows 7 with this version "Windows 7 Home Premium SP1 64bit (Full) System Builder DVD 1 Pack"

Its so hard to tell if I am ordering the right version, Will this version run smoothly and well, and does it have full support for drivers and etc.
Thanks For The Help

That sounds like the right one to me.
http://support.apple.com/kb/HT1899
Stefan

I have a Mac Book Pro A1226 - can i install Windows 7 on this via boot camp

I have a Mac Book Pro (A1226 -late 2007) and I want to run Windows 7 Ultimate on it via Boot camp. I am currently running Mac OS X 10.6.8 with Boot camp 3.0. For some reason I can't seem to install Windows 7 through Boot camp. Can I even install it on this computer? Would I be able to run Windows 7 on this computer if I purchased Parallels instead.
Thanks

You should try asking in the Boot Camp forum where the Boot Camp gurus hang out. Your issue has been discussed there many times.
https://discussions.apple.com/community/windows_software/boot_camp

Can I install Windows 7 on a Satellite C855-1WR?

I've made a BIG mistake! After having Satellite's for years, I recently bought a C885-1WR but didn't notice it came with Windows 8.....and I HATE it :(
Can I install Windows 7 on this machine?
If so, how do I do this, please?
I have very little technical knowledge, so easy answers please.
I would be eternally grateful for any help.
Thank you so much
Polly

Of course you can do that.
You can install Win 7 if you want.
Firstly you have to go to BIOS (press F2 while booting)
In BIOS disable secure boot and switch from UEFI mode to CSM mode.
Save the changes and now you could boot from the Win 7 disk and could start the installation.
But just one important note: read you user manual and create the recovery disk BEFORE installing anything on the notebook. The recovery disk help you to go back to Win 8 in cases you would like to use it again!

Can I install windows xp on the new version of bootcamp?

All the options have windows 7 as if it is requierd you had it. Can I install it like that?

JesseWood wrote:
All the options have windows 7 as if it is requierd you had it. Can I install it like that?
The simple answer is you can not install XP on the latest versions of BootCamp.

How/Can I install WINDOWS 7 64BIT on a 1st Generation Mac Pro ?

Hi, Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz? Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all te installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
When I try installing 64 bits, I never get past the "select cd rom 1or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
Problem is it's all Windows based with exe files and presupposes I already have Windows running.
I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows users successfully installing Windows 7 on a 1st Generation Mac Pro.
Thanks.

I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
1. Update Snow Leopard
2. Place the Windows cd in the Super Drive
3. Shut down the computer
4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
5. Boot the computer holding down the Option key
6. Boot to the Windows cd
7. Install Windows and format the drive to NTFS
8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
9. After Windows installs, place your Snow Leopard disc in the Super Drive
10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
11. Go to Start > All Programs > Apple Software Update
12. Update again until it's done.
13. You'll also find a BootCamp under Control Panel, check it out.
14. Shut down the computer and replace the hard drives in their original order
14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

I can't install Windows 8.1 on my Imac with Mavericks using Bootcamp. Why?

I can't install Windows 8.1 on my Imac 27" with Mavericks using Bootcamp. Why? I first did all the software updates needed, downloaded the driver software to a 32Gb flash drive formatted as FAT32, fired up Bootcamp Assistant, inserted the Windows 8.1 Full version 64 bit installation DVD as requested, and got as far as partitioning (tried this at 82 Gb for the Windows partition), then the MAC rebooted but halted before getting to the login page. Then a black screen came up with the error message: 'non-system disk - Press any key to reboot'. I did this and nothing happened. I was forced to shut down forcibly then restart with my finger held down on the option key. Then a screen came up with two icons: the macintosh HD icon and the Windows DVD icon. I double-clicked on the Windows DVD icon and the MAC came up with another black screen and error message: 'CDBoot: Couldn't find BOOTMGR'. Had to shut down forcibly again and restart as before, this time ejecting the Windows DVD first. Then I repartitioned my MAC back to all OSX. What the **** do I do now? Applecare couldn't help me beyond this point. They said to contact Microsoft. I notice a lot of other MAC owners have had similar problems.
Please help? tagjsmith.

bootcamp does not currently support windows 8.1

Can I install windows home server 2011 on a mac mini?

Hey guys and girls...
Can I install windows home server 2011 on a mac mini? If so how?

WHS is 64-bit. Genius are really not versed in Boot Camp or Windows, let alone anything not on the "approved" list of Windows versions.
Most of the problems are with burning ISO, or the SuperDrive. It should have seen the NTFS partition. Disk Utility is known to be trouble, burning it on your Mac Mine but iwth Windows 7....?
Seeing you have Windows 7, format the partition to NTFS 160GB you want and then exit and boot WHS installer.
Or run the install from Windows 7.
In past, WHS supported TimeMachine, streaming video, supported iTunes (that was broken/disabled it seems by Apple with 10.0), as well as even SuperDuper backups.
Main idea is to have some network attached drives.
Netgear ReadyNAS Ultra2 Review
Newegg - HP StorageWorks X310 Windows Home Server
I have both a ISO and Burned it to a dvd useing windows 7 built in ISO burning software, Its a 64 bit copy (got from microsoft download website from my dads microsoft account).
It is enouth for the OS but it runs slowish on the mac mini (latest core 2 duo 2.4ghz model) The Idea was to have it backup my pc and laptop to a usb drive and act as a media centre pc (connected to av receaver and tv and on a gigabit network with a 2TB nas)
Since it looks like this may not work, whats the best way to make it into a media centure? mac osx? windows 7? plex? whats best and good?
I'd avoid USB like the plague. Why not use your PC instead? If I was going to use a Mini for WHS, I'd just use the Mini solely for Windows and not have OS X (you can boot OS X off an external drive anyway).

Can I install Windows 8 on an older Mac Pro with Mavericks upgrade?

I have an Early 2008 Mac Pro which I just upgraded to Mavericks, which came with Boot Camp 5.1. Can I install Windows 8 on my machine? The information on this site suggests I can only use Windows 7 with Boot Camp 4 on my system, but does this take an upgraded OS into account? Put another way, is the version compatibility determined only by my OS, or also by my hardware (processor, memory, etc.). This is the first time I will be using Boot Camp to install Windows on this machine.

no, it is determined mainly by machine type then by requisite driver support in the OSX
officially, x64 w7 is as far as you can go but google around, i'm sure there have been people who got w8 to work
http://support.apple.com/kb/ht5634

Can I install Windows 8 through bootcamp without previously having Windows 7 or any sort of Windows?

I have a 13.3" Macbook Pro that doesn't seem to like Windows 8. It did not previously have and patition/Windows side. I bought the full version of Windows 8 for $199.99 and hope I do not regret it. The mac does not have a disk drive, so I use an external CD drive aka Apple's Superdrive. I tried to Bootcamp, but when it was trying to swap to Windows, the screen turned white, then black, then white, then black again with a little blinking underscore in the top left corner. It stayed like that for 10 hours until I got sick of it and restarted. It did the white screen, then black screen with this time a message saying "No bootable device-insert boot disk and press any key." and nothing else. I restarted again, disconnecting the CD drive and USB drive. This time, I held down the option key and went back to the Mac side. I got rid of the partition and tried a couple more times but to no avail, so could any of you please give me some advice? Thanks.
I am not sure whether the problem is the external CD drive, the lack of any type of Windows, or its a weird glitch.
P.S. i went to the Apple Store to see if they could do anything but they said the software with the Bootcamp for Windows 8 wasn't out yet:( But i've heard rumors of some tweaks people have made to get Windows 8 on it.

If you want to use Bootcamp then Windows 8 is not supported as Shootist007 has already stated. There are no Windows 8 Boorcamp drivers.
You can use a virtual machine like Fusion, Parallels, or VirtualBox to install Windows 8. This may be a work-around for you until the Windows 8 Bootcamp drivers become available.

Boot Camp sees my internal SSD as an external drive - can't install Windows 7

I've just replaced my old 1TB drive on my Mac Pro (mid 2010) with a 1TB Samsung 840 EVO. To get the best speed I've installed it using the Sonnet Tempo PCIe interface. I performed a fresh install of Mavericks 10.9.1 and the system absolutely flies.
However, I wanted to also install Windows 7 but Boot Camp Assistant will not allow me to do this. It warns....
You cannot partition an external disk, a RAID disk or an internal disk on which FileVault encryption is in progress.
When I look through the system information, my SSD is reported as an external drive - which is why I guess BCA refuses to partition it (and ghosts out the option to install Windows 7 or later version.
Here's the system information under storage...
MAC SSD:
Available:          941.47 GB (941,471,612,928 bytes)
Capacity:          999.35 GB (999,345,127,424 bytes)
Mount Point:          /
File System:          Journaled HFS+
Writable:          Yes
Ignore Ownership:          No
BSD Name:          disk0s2
Volume UUID:          DED0438B-7A12-3AB0-8E6D-E6911C595CA2
Physical Drive:
Media Name:          Samsung SSD 840 EVO 1TB Media
Medium Type:          SSD
Protocol:          SATA
Internal:          No
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. Status:          Verified
So my questions are... Why does OSX identify it as an external drive? Is it because of the PCIe interface? And, more importantly, how can I get around this to allow me to install Windows 7? Could I temporarily remove the PCIe card and install the SSD in a standard drive bay and then run BCA? Any ideas???
Thanks.

Kappy is dead on with 1 more tweak ... remove the PCI card, and put the SSD back onto a normal drive bay and fully install Windows.
Then, put the empty PCI card back into the machine and boot into both OSX and Windows ... both OSs should work just fine.
Now, put the SSD onto the PCI sled and test both OSs.

Can't install Windows "No bootable device -- insert boot disk and press any key"

I'm running OSX 10.9.3 on my Macbook Pro 13-inch, Early 2011 and trying to install Windows 7 via Boot Camp Assistant and I'm using a flash drive loaded with bootable copy of Windows 7 Ultimate (legal, if that makes any difference).
Here's what I've been doing:
1. Plug in my flash drive, then on Boot Camp Assistant, click "Install Windows 7 or later version"
2. Set my Windows partition to 45GB and continue... so far so good...
Then the problem:
3. My computer restarts, goes to a black screen with the message "No bootable device -- insert boot disk and press any key"
The flash drive is still plugged in but is it not being recognized or something? Nothing happens when I press any keys.
I can use OSX just fine by holding down "Alt/Option" on restart, but in my case what can I do to continue further with the Windows install? It's basically an empty partition as of now. Any help appreciated!

Ive been having this problem and have been trying to figure out how to fix it for almost a week now. I have a 2011 17" MBP with the superdrive removed. Ive tried many different methods and many different methods to no avail. If anyone can help, please do!
xxzy, have you tried the KUNU method?
you can find it here:
Bootcamp without Optical disc drive
Scroll down to Kunu's post about his solution and see if it works for you.

Can't install windows 7 on Satellite C75D-B7260

Can't install windows 7 pro on Satellite C75D-B7260 I have tried a clean install and have tried through windows 8 pro. Win 7 won't get past start screen. I have secure boot turned off in BIOS and there is no CMS or legacy setting. System bios version is 1.20 and ec version is 1.10 Toshiba service station does not find an update for the BIOS. and only 1.10 is listed on the product page. I found a 1.30(
BIOS version 1.30 for Satellite C7x-B/L7x-B/S7x-B (PSCL4x/PSKRLx/PSPP2x/PSPP4x/PSCNUx
I have not tried to use this update as my specific part # is not listed in the install notes.

Satellite C75D-B7260
Downloads here.
You can install Windows 7 if you like. But I doubt you'll ever locate enough of the drivers and utilities to make that laptop work as designed. Toshiba certainly did not create them.
If you have no end of time to burn hunting for those and don't mind some features missing, here's how to install Windows 7. The disk now uses GPT partitioning, but you want the old MBR partitions. So use the installation package to remove all the existing partitions and create new ones (one is sufficient).
-Jerry

Boot camp 4 can't install windows support drivers

Hi everyone,
I have the new imac 27" with thunderbolt and preinstalled Lion. They dont give you a CD.
I run Boot Camp assistant (version 4.0) and try to install windows on a purchased DVD Windows 7 x64 ( i am a recent convert to mac but still need some windows proggys.)
Ok so once I run the installation It asks me to download the windows support drivers... I do this but then it stops 3/4 through the process and comes up with an error "can't install windows support drivers".
Do any of you out know how to fix this???
Also If I dont use the option to update the software before installing and just select install windows 7 (second option) from a disc. It installs windows fine BUT it wont install any of the network, usb, camera, graphics and sound drivers. so basicaly I am blocked from the internet for windows to update the drivers. I also cant get the driver files from another computer as the mac in windows mode can recognised usb sticks as the drivers arent installed.
I need help urgently on this as it is doing my head
Thanks in advance.
Daniel!

Yes, but.
Open Network Preferences>Network>Advanced>Proxies and uncheck everything (try Passive Mode on, and off, but no auto Proxies)
And try again.

How Can I install Windows on my iMac??

Hi There! I wanted to ask that how can i install windows 7 64-bit on my imac as i wanted to use some softwares and also, play some games that are not there on osx. Please tell my how to do this. I have a 2007 24-inch iMac with the following specs-
Intel Core2 Duo CPU@ 2.40GHz
4GB RAM (That i Upgraded Myself)
Radeon HD2600 Pro Graphics, 256MB
320GB HDD
OSX 10.8 Mountain Lion

Your Mid 2007 iMac has got a 64-bit processor that allows you to install a 64-bit Windows 7 version, but Apple doesn't give you support for it in your iMac. Only Late 2009 and newer iMacs are supported by Apple to install a 64-bit version. See > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US
My advice is to install a 32-bit Windows 7 version, although you will probably not be able to use all the RAM. Follow Apple's steps to install Windows > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
If you still want to install a 64-bit Windows 7 version, do it, but note that it won't work properly as there are no Apple drivers for it

Can i install Windows XP on this version

Similar Messages

Maybe you are looking for