Can I install xp to my macbook air MAC OS X 10.7.2

Hello,
I have macbook air i5 1.7GHZ with MAC OS X 10.7.2 installed. I would like to use xp with my MAC OS. I really need XP please show me a way rather than VMWARE
Best regards,

Shima79 wrote:
I need to install xp since my software does not work on Windows 7
Any help appreciated.
Are you sure about that?  I have a few legacy programs myself that won't run with Win7 64bit mode, but they run fine in 32bit mode.  Guess what edition of Win7 I'm running?  And it runs sweet.

Similar Messages

  • How can i install iwork dvd in Macbook Air?

    Somebody know how can i install iwork dvd in Macbook Air? I try to use the CD compartment from my Macbook pro, but it don't work... tks

    First, share your MB pro DVD drive on the network in System Preferences > Sharing.
    Insert the iWork DVD into the MBpro's drive.
    Then go to your MBair and click "Remote Disc" in the Finders Sidebar.
    You'll see your MBpro listed in the finder window.  Click the arrow next to The MBpro name and you'll see the shared DVD.  Double click that and the installation process should begin.
    Regards,
    Captfred

  • [Ubuntu] Can't install Ubuntu on my MacBook Air.

    I want to install Ubuntu on my MacBook Air. Problem : each time the DVD-RW burning ends, the disc becomes unreadable. How can I install Ubuntu 12.04 64 bits on a MacBook Air late 2011 still with OS X Lion ?
    Hi there.
    I have a MacBook Air late 2011 still working with OS X Lion (actually OS X 10.7.4).
    I just wanted to install Ubuntu 12.04 64 bits on my MacBook Air but I can't and I don't know why. The problem I encounter is the following : each time the DVD-RW burning ends, the disc becomes unreadable by the system and I can't do anything but erase it and try to burn it again… This is the fourth time I did it and it still doesn't works. Impossible to burn the DVD-RW without making it unreadable by the system. And I checked Bootcamp Assistant options but there's nothing about Linux…
    I use an original Apple's superdrive to burn the disc.
    A friend just told me to use Bootcamp Assistant, install Windows 7 on a new partition, then replace Windows 7 with Ubuntu… But I don't really know what to do. This is the first time that I try to install another system…
    Could anyone help me ? Thanks.

    I finally did it. In fact, if the DVD wasn't readable by OS X after the burning, he was readable by rEFIt on the superdrive. Me (OS X Lion 4 on a MacBook Air late 2011) and a friend (OS X Mountain Lion 1 on a MacBook Pro of 2008) did it this way :
    1. Download the Ubuntu iso named "ubuntu-12.04.1-desktop-amd64.iso".
    2. Burn it on a blank DVD with the disk utility.
    3. Make a partition for Ubuntu with the disk utility.
    4. Install rEFIt.
    5. Restart the Mac.
    6. Select the icon of Tux behind a little disc.
    7. Try Ubuntu from the disc.
    8. While trying Ubuntu on the disc, use the installer to install Ubuntu. NOTE: NE CAREFUL WHILE INSTALLING UBUNTU, IF YOU CHOOSE THE WRONG OPTION AT A MOMENT OF THE INSTALLATION YOU CAN ERASE OS X.
    9. After the installation, Ubuntu should tell you that you might restart the computer. Restart the Mac, and you'll arrive on the rEFIt menu.
    10. You can now use Ubuntu on your Mac, enjoy.
    We both did it and it worked well, I even reinstalled Ubuntu and it worked well again. Just be careful while installing Ubunut, I'll maybe repeat myself but choosing the wrong option could suppress OS X. Except if you just want a MacBook Air with Ubuntu for the weight… Have a nice day.
    Message was edited by: Subs_255

  • How can i install Flash Player for MacBook Air?

    Please if somebody knows how to help me to install Flash player for Macbook air?

    Welcome to Apple Support Communities
    You can download Adobe Flash Player from the Adobe site > http://get.adobe.com/flashplayer After downloading it, run the installer to install Flash Player, and when the installation finishes, restart your Mac. You will be able to use Adobe Flash Player with all your Internet browsers

  • Can you install iLife on a MacBook Air? No CD player.

    I needed to know if you can download iLife 11" without a dvd/cd drive??!!??!!

    One easy way to install applications onto a Macbook Air from CD/DVDs that you already own, if you own another Mac, is to put the optical disk into the disk drive of the other Mac and use "Disk Utility" (in the Applcations/Utilities folder) to create a Disk Image (.dmg) file of the CD/DVD. Put the disk image onto a USB flash drive. Plug the flash drive into the USB port of the Macbook Air and open the .dmg file, or transfer it to the Air first then open it (I prefer that method). After you open the .dmg file you will see a new "disk" icon on your desktop. You may have to double click on it to open it, or it may have opened automatically when you opened the .dmg file. Now it should look like you have an install CD/DVD mounted and you are ready to install software on your Macbook Air. Install the software as you would normally and viola you are done.
    If you transferred the .dmg file to your Macbook Air be sure to delete it, Macbook Airs don't have a lot of disk space.

  • HELP! I can't install OSX Mavericks on MacBook Air

    Help! I just download and install OSX Mavericks on MacBook Air (2012), its already downloaded and installed but when booted, the wheels machine on the screen keep running. its even more an hour and i restarded it for severel times. but still not working. should I wait until the installation finished? for how long? 1, 2, or 3 hours?

    Then the hard drive is corrupted. You will need to erase it then reinstall:
    Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Can't install windows xp on macbook air

    Hi,
    I have posted already on the forum about 1 month ago or more and no one answered me, so trying again.
    How can I install windows xp on my macbook air?
    I have an original xp sp2 disk and a generic external dvd burner with usb.
    I have tried many times with bootcamp, but when I get the information (with disk utility info) of my xp 2 disk it says its not bootable.
    Do you think its my disk or my external dvd burner that can't boot?
    Should I get a super drive for it to work? Is there an other way for my mac to boot the disk at startup?
    Anyone please have any answer on how they installed windows xp.

    Yes.
    I have seen this page many many times already.
    I know it is not supported by apple. But it must be possible. I read about people with MBA's getting xp on them.
    My windows xp sp2 cd should at least be bootable? Its an original with the flashy 3D genuine design on it.
    I have installed Win 7 previously, but with a usb stick. I can't have a 20gb OS on my 64gb MBA drive.
    I hope you can understand better my problem.
    Thank you.

  • How can i install windows on new macbook air using remote drive on the bootcamp partition

    Hi all, I just purchased a new macbook air mid - 2011 with OSX-Lion installed on it. I wish to install Windows XP on the boot camp partition but have not purchased the external super drive. Is there some way that I can install windows on boot camp using remote drive of my other macbook pro system.
    If this is possible, then please guide me.
    Thank you,

    Since I do NOT use anything from M$, I am afraid I am not right person to help you.
    I would suggest that you post your question for help over in the BootCamp forum loacted here
    https://discussions.apple.com/community/windows_software/boot_camp
    Allan

  • Can't install Flash on new Macbook Air

    I've just got a new Macbook Air - new to this!
    I have tried to install Adobe Flash Player with no success, can someone help?
    Everytime the download gets to around 50%, it stops and tells me Safari needs closing - however it isn't open.
    I've already tried a 'clean install' and rebooting from searching these kind of forums.
    Help! (laymans terms please - I'm not that 'techie'!!)

    1.  Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.

  • I can't install Mavericks in my MacBook Air 2011

    I run the instalation of Mavericks in my mackbook air, but can´t run after 6 min for finish.

    I just want to confirm that this is the instalation phase that is not working, if it is just the download your machine will still be 10.8.5 and you should be able to run with that after a restart.
    If it is the installation phase that as failed I can only suggest that you recover from your latest backup. That would put you back to ML and a working system. Use CMD r to boot into recovery mode and you will have the option to recovery from Time Machine.

  • Can't install any OSX on Macbook air late 2010

    After starting upgrade from 10.6 to 10.8 the system don't started. I tried to reinstall 10.6 from DVD and USB stick, but before the initial setup screen come up the system restart. the same happens with 10.8.
    There is also no possibility to use the recovery disk Assistant, the system restarts before I see any screen.
    If I use a Windows7 DVD I can install it without any problem. Does anybody have a hint for me what I can try to get my OSX back?

    It looks like there is a problem with my 128GB Samsung flash disc. If I format it with HFS+ (using the Gparted boot disc) the macbook doesn't restart. Then it see the screen to shut down the computer in several languages.
    When I delete the partition the OSX installer everytime restart the system without showing anything.
    But why works Gparted and Windows boot discs? I have the problem only with OSX .
    Any help/advice appreciated.

  • I can't install Lion on my macbook Air 'cause i have any cluster damaged.. Any help ?

    I've tried to install lion on my MBA but i can't select the internal Hdd cause there are any cluster damaged and the Os can't select that drive. How can I do to solve this problem ?

    You need to boot from your install disk or thumb drive (turn the computer on while holding down the "C" key). It will look like you are reinstalling the operating system. Look at the menu bar, you will see Utilities. Can't remember the exact menu path, but you are looking for Disk Repair or Repair Disk. Select your bad drive and chances are pretty good the software will repair the drive. Then reboot normally and your install will likely work. If not, it's off to the Genius Bar.

  • HT203167 I installed instagram on my macbook air mac os x 10.7.5 and it is not shown anywhere and i am not able to open the file. it is listed as mobile application, what do i do?

    i am having a serious issue on locating my intunes downloaded files on my dock or anywhere else on my mac.
    i wanted to know how am i able to locate them and use them..
    and Music>itune media , the apps which i downloaded are listed as mobileapp is that y i m not able to acces them from the dock??

    You downloaded an iOS app and those can't run on OS X.
    If you have an iOS device you can install them from iTunes.

  • Can't install Flash Player on my Air Mac

    I follow all the instructions but each time after the screen windows indicate it has loaded, but when I click on Finish, it takes me right back to Install Flash Player window and the app is NOT loaded.

    Do a "Clean Install" per the instructions here: http://forums.adobe.com/thread/1343084

  • I have a mountain lion 10.8.5 version installed on my 2012 Macbook air but there is no Wireless Network application installed. Can anyone advise me how to fix this or get it installed, thanks.

    I have a mountain lion 10.8.5 version installed on my 2012 Macbook air but there is no Wireless Network application installed. Can anyone advise me how to fix this or get it installed, thanks.

    thank you Eric/Joe, what I actually was looking for is wireless diagnostic utility not the wireless diagnostic assistant as per your advise but have found the resolution right here http://support.apple.com/kb/HT5606

Maybe you are looking for

  • Thunderbolt 2 VGA adapter

    I have had my MBP for 6 mos and have recently started making Keynote and PowerPoint presentations.  I would like to be able to connect to a projector and share the presentations in the lecture hall but everytime I plug into the Thunderbolt port on my

  • Trouble with reauthenticating NAC users after laptop is out of hibernation

    Hi, Have trouble with users logging back on to laptops that comes out of hibernate mode. NAC agent pops up saying " Client Access Server not available on the network" The current solution I have now is to run Kerbtray.exe too clear the kerberos tkts.

  • Quick Look Filter not working in OS 10.6.8

    I really like the ability to preview files by simply pressing the spacebar. I was able to do this fine on a previous iMac using OS 10.6.8, but when I installed the QuarkXpress.qlgenerator file on the new iMac running OS 10.6.8 it does not work unless

  • Scrolling To The Bottom of a WebView

    I'm trying to figure out how to determine when the user has either scrolled to the bottom or the top of a web view. There doesn't seem to be a way to get the current scroll position within the webview. The ScrollEvent only shows the current delta, an

  • I still do something wrong with Scrollpane and zoom capability

    Hi all! I thought I was successful in creating a working ScrollPane with centered zoom capability, but now I noticed that it doesn't work like it should, if the content node's PrefSize is larger then the scrollpane's size. The probleme is: if the con