Can I interface a normal DC motor with a computer using LabView?

I am trying to find a DC motor that can be interfaced with the computer using LabView. Is that possible? If so, HOW?

There are many ways to control DC motors from LabVIEW. National Instruments provides plugin motion control boards like the PCI-7342 that are capable of controlling 2 to 8 stepper or servo motor (DC) axes. Additionally you need a drive for power amplification.
You find lots of very good information about controlling motors from LabVIEW with NI motion control hardware under this link:
http://www.ni.com/motion/
The NI motion control boards have lots of high level features like position control, interpolation modes, contouring, onboard programming and so on. Your request is very brief so I can't tell if this level of control is oversized for your application or not. If you simply want to turn a DC motor on or off there will be cheaper methods to accomplish that.
Best regards,
Jochen Klier
National Instruments Germany

Similar Messages

  • I can not get my Ipod to connect with my computer using a usb cord

    I can not get my Ipod to connect with my computer using my usb cord ?

    Hi starhalcomb,
    I'm sorry to hear you are having issues with your iPod touch. I also apologize, I'm a bit unclear on your exact configuration. If you are having issues with your iPod touch not being recognized in iTunes when you connect via USB, you may find the information and troubleshooting steps outlined in one of the following articles helpful:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If you don't see your connected device in iTunes for Mac - Apple Support
    Regards,
    - Brenden

  • Can I upgrade to OS 10.5 with this computer and still use OS 9 and more?

    I am NO computer expert, so, I'm wondering if:
    1. Can I upgrade to OS 10.5 (currently using OS 10.3.9) with G4 computer using 450 MHz processor?
    2. Can I still use my old programs (ie Claris 4.0) that switch over to the OS 9 system?
    3. Will this upgrade my Safari so it doesn't quit when I try to make a simple reservation on the Holiday Inn website?
    Or, is this just too old and obsolete and I need to get a new computer? I do not do complicated projects with lots of graphics. So far, I'm not having any trouble using my Kodak EasyShare digital camera with the computer. It's just that Safari that gives me trouble.
    Any advice (upgrade vs new) will be appreciated.

    Hi, lwbusdrvr. Leopard requires at least an 867MHz G4 processor. Yours is barely half that fast. Tiger would run on your computer, and it supports Classic and the current version of Safari.
    But the simplest thing for you to do would be to download the free Camino 1.6.4 or Firefox 2.0.0.17 and use it instead of Safari, without needing to upgrade your OS at all. For links to downloads for each, see my post here.

  • Can I communicate single PXI chassis with multiple computer using MXI

    Can I communicate single PXI chassis with multiple computer using multiple MXI cards
    we are using cvi with MXI we want to share channels for other computers Can we do with mxi 

    Yes this is possible when you use a PXI controller.  Attached is a screenshot showing a possible configuration.
    Jacob K || Applications Engineer || National Instruments
    Attachments:
    PXIMaster.png ‏20 KB

  • Since Febuary 14th, 2013 we are unable to send and recieve email using our hotmail account on our Iphone. We can get our email by loggin in with our computer but not using our Iphone.

    Since Febuary 14th, 2013 we are unable to send and recieve email using our hotmail account on our Iphone. We can get our email by loggin in with our computer but not using our Iphone.

    Hotmail has been discontinued for some time now.  See:
    http://windows.microsoft.com/en-us/windows/outlook/auto-upgrade-outlook-faq

  • Is it possible to create a schedule in Labview . Example: i want to off the lights at 7pm and want it on at 8am. If there is can anyone teach, its for a school project. Im using labview 2011

    Is it possible to create a schedule in Labview . Example: i want to off the lights at 7pm and want it on at 8am. If there is can anyone teach, its for a school project. Im using labview 2011...thx

    Since this is a school project I recommend you do the work yourself. You will not learn asking others to do it for you. In addition, folks here will not do your homework for you. We are however more than wiling to answer specific questions for you. Post what you have done or tried and ask specific questions. I am confident you will get assistance.
    And to answer your question, yes LabVIEW can be used to implement a scheduling program.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • How can I find out what kind of battery my computer uses in order to buy a replacement?

    I purchased a new Macbook Pro 13" in January 2012. Unfortunately, I did not purchase Apple Care. My trackpad seems to have taken on a life of it's own. I'm guessing this is due to a swollen battery. How can I find out what kind of battery my computer uses in order to buy a replacement?

    Take a look at this link, http://store.apple.com/us/search/macbook-pro-battery-replacement?mco=Nzc1MjMwNg
    This is the MacBook Pro repair answers, http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=Macn otebooks

  • HT203311 I am use homesharing, but cannot sync the main library from the secondary computer to an iphone.  It shows the entire libaray on the computer, but only shows a few songs when I try to sync iphone with the computer using homesharing.

    I am use homesharing, but cannot sync the main library from the secondary computer to an iphone.  It shows the entire libaray on the computer, but only shows a few songs when I try to sync iphone with the computer using homesharing.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT204074 Why can only ONE Apple ID be associated with a computer every 90 days?

    We have 3 family members who all sync our iPhones/iPads/iPods to the same computer.  My son can't access and download past purchases from his iTunes acct to our computer, because it says ONLY ONE Apple ID can be associated with the computer every 90 days, and I just downloaded a movie this week from my own account.  Now, my son has to wait 90 days to access his own purchases.  I feel I should have access to my purchases any time I want, as should my son and any other family members who use this computer.   The number of devices authorized to access iTunes Store purchases is already set to five (which we do not exceed) so, why this additional restriction?  I don't understand why Apple would restrict me from accessing our own purchases. 

    This bothers me so much. It is absolutely ridiculous. I use my Apple ID as well as a family member's Apple ID to download music.
    Every once in a while I will purchase a song and it won't download correctly or will give me an error that my computer is not authorized, a solution I usually fix by deleting and redownloading the song from the cloud. This doesn't work, however, when it happens to both accounts within 90 days.
    It is incredibly frustrating to me that I have paid for a song, it downloaded incorrectly, and I must wait 90 days to try downloading it again because of these assinine policies.

  • How can i get my iphone to sync with my computer?

    I can not get my iphone to automatically sync anymore with my computer help me please?!!!

    anthonyitaliano
    HT1386 Re: My new iPhone5 won't finish syncing. 
    Nov 10, 2013 5:47 AM (in response to anthonyitaliano)
    not sure if this is a permanent fix but, ever since upgrading to itunes 11.3.1, my iphone5 seems to finish syncing on its own, now. didn't seem to be a problem anymore. at least after doing only one sync, since the upgrade.
    (stiil have a blank "purchased" page at itunes store, though).

  • Can we get the list of words with hyphenation breaking used in English:US dictionary?

    Hi,
    I require list of words with hyphenation breaking used in English:US dictionary. I have reviewed in InDesign supporting files in my local folder but I couldn't get. Can anybody assist?
    regards
    Masthan

    InDesign uses Proximity dictionaries for most languages to verify spelling and to hyphenate words. You can add words to each dictionary to customize it. You can assign different languages to text, and InDesign uses the appropriate dictionary to handle spelling and hyphenation.
    There are possible breakpoints the dictionary will consider and then show up in the InDesign , if you want to know between which two syllables Indesign’s dictionary prefers to hyphenate, and what other possible breakpoints the dictionary will consider.
    Choose Edit > Spelling > User Dictionary.
    In the Language menu, choose a language. Each language contains at least one dictionary. If you want the word to be added to all languages, choose All Languages.
    In the Target menu, choose the dictionary where you want to store the word. The Target menu lets you store the changes in an external user dictionary or in any open document.
    In the Dictionary List menu, choose Added Words.
    In the Word box, type or edit the word to be added to the word list.
    Click Hyphenate to see the word’s default hyphenation. Tildes (~) indicate possible hyphenation points.
    If you don’t like the hyphenation points, follow these guidelines to indicate your preferred hyphenation of the word:
    Type one tilde (~) to indicate the best possible hyphenation points, or the only acceptable hyphenation point, in the word.
    Type two tildes (~~) to indicate your second choice.
    Type three tildes (~~~) to indicate a poor but acceptable hyphenation point.
    If you want the word never to be hyphenated, type a tilde before its first letter.If you need to include an actual tilde in a word, type a backslash before the tilde (\~).
    Click Add, and then click Done. The word is added to the currently selected Dictionary List.
    Note: Remember that hyphenation points interact with the hyphenation settings in your documents. As a result, the word might not break where you expect it to. Control these settings by choosing Hyphenation in the Paragraph panel menu.
    By default, hyphenation and spelling exceptions are located in user dictionary files stored outside the document on the computer where InDesign is installed (dictionary file names end with a .clam or .not extension). However, you can also store exception lists inside any InDesign document. In addition, you can store word lists in an external user dictionary, in the document, or in both. The location of existing dictionaries appears in the Dictionary preferences.

  • Why I can't restore my iphone 5 version 7.0.4 with my computer use itune 11.1.5 on window 7 ? Is it only OS X (Mac Book) can restore it ?

    Why I can't restore my iphone with my window using itune 11.1.5. Is it any wrong with computer using window ? And why my friend can restore his iphone using Mac Book ( OS X ) I don't understand. Is it only OS X can restore the iphone ?

    It seems I have solved my own problem . . . well hopefully !!   ;-)
    I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
    Hopefully this may help others . . . ?
    Cheers,
    Grant.

  • I can't sync my ipod 5th generation with my computer, lost symbol. Help

    My computer screen is not showing the sync symbol, therefore I can't sync my new songs onto my ipod touch 5th generation, I have tried everything but just can't seem to find how to sync anymore

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem
    DId yo sync with this computer before?
    Saying "I have tried everything" provides us with zero information as to what you did try. If you really did try "everything" then there is no way we can help.

  • How can i get my printer to connect with my computer to print?

    I have a HP photosmart prem-web C309n-s printer. I have two different computers. One is a 4 year old HP laptop, and I just recently purchased an HP touchsmart 320 PC. I installed the printer when I first got this computer, and the printing worked fine from any computer that was in the house. Now, it seems that my printer is not connected with my computer. With my dad's laptop in the house, he had before installed the printer, and when I look up the network on my printer, the only computer that it shows connection with is his. I need to print things for class, and I'm not sure how to make my desktop "visible" to my printer. Please help!!!!

    In the Print dialog box choose "Scale To Fit"

  • How can I disable my iphone with a computer using itunes?

    How can I disable my iphonewith a computer using itunes?

    Welcome to the Apple Community.
    You cannot disable your phone using iTunes.
    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

Maybe you are looking for