Can i keep installed cs4 cs3 and cs2 on a pc

Hi
I don't know if there are issues about have cs4 , cs3 and cs2 installed in the same pc
I bought cs2 in italian
and i have installed cs3 in english to follow the turorial more easily
thanks

yes, they're all installed by default in totally seperate folders. just don't mix them up (like copying plugins from one to another).

Similar Messages

  • Can i keep using bridge cs3 in combination with photoshop cs5

    can i keep using bridge cs3 in combination with photoshop cs5

    I have a question sort of relevant to this discussion. Had my 8800GT start to fail on me in my MacPro1,1 - in desperation I disassembled the card, cleaned it, applied fresh thermal compound/padding, and stuck it back in. To my amazement the card actually began working again! Before failing a few days later ; ;.
    I ordered a replacement 8800GT on ebay for a considerably low cost, but before it arrived my computer began behaving normally again. From what I'm understanding from this thread, there is absolutely no benefit to installing both cards in my computer at the same time? If that's the case, I'm going to tuck the backup card away and keep riding my self-repaired card until it crashes again.

  • CS3 and CS2

    I was searching forum and read that it may be an issue with installing CS3 and CS2 on the same computer. Can someone confirm this for me as true.
    Thanks,
    Tim

    Never had any problem at all, although (disclaimingly yours) YMMV.
    I should mention that my experiences are based on chronologically installing CS, CS2, and CS3,
    i in that order.
    (It might be important -- perhaps someone with lots of free time can experiment with different install orders.)
    As the file extension for all three versions is the same (".indd"), Windows cannot link files made with different versions to their original creators, and using the Explorer, the latest installed version will lways open. However, each separate program can be started manually, and can open its own documents and older ones w/o any problem at all.

  • Can I clean install CS4?

    Hello!
    I recently bought a new PowerBook Pro. I have the full version of PS CS2 and just bought CS4 Design Standard (upgrade). Do I need to install CS2 first and then CS4, or can I just install CS4?
    Thanks in advance!

    mr,
    >Do I need to install CS2 first and then CS4,
    No.
    >or can I just install CS4?
    Yes.
    Neil

  • Can I un-install iOS 8 and go back to iOS 7.1 on my 5s?

    Can I un-install iOS 8 and go back to iOS 7.1 on my 5s?

    YMMV:  You have been warned that some are successful,  others apparently are not.  I approached it very methodically and ended up with a successful downgrade.  I offer this only to those that are stuck, and for work reasons need their phone to work,  don't want to keep trouble shooting and re-installing IOS8.
    I used an official Apple supplied copy of the 7.1.2 ipsw and would not do otherwise.
    Below is best explanation I found.  Keep in mind you cannot restore from an IOS8.0 backup if you are successful going back to 7.1.2.  In other words,  any text messages / photo messages, data,  photo's and videos that you haven't put up onto the icloud need to be saved somewhere if you want access to them after downgrade.  I also hope you have a good backup of your old 7.1.2 IOS prior to your move to 8.0.
    If you don't have an old 7.1.2 pre IOS8  backup stop now.
    Read  CAREFULLY.
    http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/
    http://api.ineal.me/tss/status

  • My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

    My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

    If you purchased it from Apple within the last 14 days then you can return it for a full refund. otherwise no. If you purchased it elsewhere you have to check with them.
    Do this to transfer info
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • My macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    my macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    That indicates a hardware failure. Read here:
    http://support.apple.com/kb/ts1559
    If nothing works, you most likely have a hardware failure. Make an appointment at an Apple store to confirm.

  • Do I need to re-install the WHOLE suite or can I just install just Encore and Premier Pro?????

    I'm having a problem with my Encore and Premier Pro software. I have the Adobe Creative Suite Production Studio Premium CS5.1. Encore will not allow me to burn DVDS. I'm getting an 52102 error...won't allow it to finish writing...ALSO Premier Pro stops after capturing about 5 or 10 minutes of video and freezes...do I need to re-install my software??? and if I do... do I need to install the WHOLE suite or can I just install just Encore and Premier Pro????? I can burn and image file and it burns DVDs on my old Corel software so I know its not the burner or the DVDs I'm using..I am in the middle of a big project for kids at school really need to figure this out...not getting anywhere online. Can anyone help??? Has anyone had this problem?  Hope I'm posting this to right place. THANKS!

    I haven't had 52102 error, but seen it discussed. Here are a couple of links
    Error = Sense Code 52102
    Encore Hardware Error Sense Code 52102
    Burning the iso file to the dvd may not be the same process as burning directly from Encore to dvd, and so may not exhibit the same error, if any. See response 1 in the first link.
    As to the capture problem, look here
    Troubleshoot digital video capture and playback | Adobe Premiere Pro

  • Installing both CS3 and CS4?

    I teach photography in high school. Our laptops will have CS4, but desktops can only accept CS3.  My teacher laptop, that I use for demos, has 4GB RAM and can handle both CS3 and 4.  Can I install both or will I have operating problems?

    Both can be on the same machine without conflict.
    For fewer confilcts suggest you do not have Bridge autoload on Statrup, as only one Bridge  version can be running.

  • I have just installed itune again. now i sync problem of existing music will be replace with new itune which is empty. how can i keep my pervious files and sync new....

    i have just installed itune again. now when i sync it, it show me warning that all existing music will be replace with new itune which is empty. h
    ow can i keep my pervious files of music photos and other files and sync with new installed itune

    Use your backup copy of your computer to put everything back on the computer.

  • Can you just install CS4 over top of CS3 ?

    I installed CS4 on a clean PC.
    No problems to report on the instalation there.
    I am wanting to install CS4 on my laptop that has CS3 on it.
    I'm having troubles finding info on what I need to do (if anything) to aid in a smooth transition.
    Any suggestions on where to look would be most welcomed.
    Thank you

    Fantastic.
    Away I go then.
    To CS4 and beyond.
    Thank you for your time.

  • Can I safely install CS4 alongside CS3

    Hi all
    We have a couple of jobs out on proof at the moment that were done in IDCS3. We are moving to CS4 and I want to know if it is safe to install CS4 on a Mac that has CS3 - will we still be able to run CS3 when the CS3 jobs come back? I know we could open up the CS3 docs in CS4 but I'd rather take time to check the documents (and the scripts used) to make sure they're right in CS4 rather than do it in a rush when the job comes in (and it will be in a rush!).
    thanks,
    Iain

    Well, I've done it and they both seem to work okay. Was slightly worried as when I ran the updater after installing CS4 it updated the Adobe Updater and I thought that if it made it a CS4 version it would no longer update CS3 programs (Indesign and Acrobat 8 Pro). But it does, so I'll sleep easier tonight.
    Thanks to all for their comments,
    Iain

  • Can I delete or uninstall CS3 and 5.5 after I've installed Creative Cloud for CS6?

    Hi-
    Does anyone know if I can delete or uninstall CS3 and 5.5 after I've installed Creative Cloud for CS6?  Just wondering if I can save hard drive space.
    Thanks.

    Yes you can uninstall CS3 and CS5.5.
    You can also do this before installing CS6 too.

  • I can't install flash cs3 AND got error my addRemovePrograms

    after i downloaded flash cs3 trial yesterday . when trying to
    install it, the setup aborted with no reason.
    and when i open the add remove prog in control panel the
    softtware name is in there. and been trying to remove it but its no
    use, when i clicked the remove button i recieved errors.
    i wonder why it wont install in my system, and why is it i
    can see it in my add remove programs?
    my system specs
    80GB HD
    1GB memory
    AMD Sempron 3000+, MMX, 3DNow
    Direct X9.0c
    ECS-761GX-M mobo
    Windows XP Pro SP2
    software currently installed
    MS OFFICE 07
    MS SQL 2005
    MYSQL 5.0
    MS Visual Studio 2005
    Is there anything i can do to uninstall this? and install the
    sotware properly?
    pls let me know thanks in advance.

    Try using the offline installer http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe

  • Issues installing CS4 upgrade from CS2?

    Hello,
    I recently had to replace my hard drive on my Mac and am now in the process of installing CS4 Design Premium. I've downloaded the files from the Adobe website and when attempting to install I enter in my CS4 upgrade serial number and it is accepted. However, when it asks for the upgrade check there is no CS2 option in the product drop down box for me to enter in my CS2 serial number. How do I continue with the installation and get my CS4 working again?
    Thanks,
    Maggie

    Try Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache.  If it continues to fail try using a different browser.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Maybe you are looking for

  • How can I disable javascript in Firefox 30 for all users on my Solaris 10 x86 box?

    I have a Solaris 10 box in a secure environment (no Internet) with Firefox 30 installed. I need to lock javascript in a disabled state for all users. I realize each individual user can toggle javascript with about:config, but that is only a per/user

  • Example: "Digital - Conitinuous Output" How does it work?

    I have to generate a sequence on three channels (with my NI 9375 Digital Output card on a cDAQ9188). In 1 second, the sequence consists of, for example: channel 1: starting low .. on 15 ms high .. on 865 ms low again channel 2: starting high .. on 11

  • DMP Error when in Business Partner Master Data

    Forum, I have one client which produces DMP errors each time they go into the Business Partner Master Data screen. This is since they have been upgraded to 8.8 PL20. Prior to this, there was no such issue. The spec of the machine is as follows: Xp Sp

  • Foreign Language and Keyboarding

    Hi All The iPhone's system is the Mac OS X. I currently have my laptop setup with four foreign langauge input -with their respective characters- thus I can type in English, Spanish, Cherokee and Thai. Same input, fortunately. throughout my system i.e

  • SIZE_CONTROL Event for docking container

    Hi, Everybody I'm trying to handle size_control event for a docking container. But the event is not trigged. See the code excerpt below: * Create left docking container   CREATE OBJECT ao_docking_container_left     EXPORTING       side = cl_gui_docki