Can I "keyframe" or "animate" filter settings on a clip?

I'd like to change the levels settings and other video filter settings over time on a single clip, in a gradual, smooth way. Is there a way to do this? Setting keyframes only seems to remember things in the Motion tab.

What version of FCE are you using?
The keyframe button in the Canvas is only for motion parameters. Filters can be keyframed in the filters tab of viewer in recent versions of FCE.

Similar Messages

Where can I keyframe speed up and speed down a clip

In the old final cut pro there was a nice way to keyframe the clips speed percent up or down so you could have that slow motion and then all of sudden go int to normal or fast motion. With FCPX that feature was taken away.

It can be done easily.
Follow these instructions.
Click on the images to enlarge them.

Middleware filter settings to block transactions from flowing into CRM

Hi Experts,
We have a requirement where in we need to stop the transactions from flowing to CRM from ECC based on the combination of transaction type and number range.
Here is the detailed scenario:
We have transaction types T1,T2 and T3.
Number range of T1 is 1000 to 2000
Number range of T2 is 10000 to 20000.
Number range of T2 is 1000 to 2000
Number range of T3 is 1000 to 2000
Transactions T2 (With number range 10000 to 20000) and T3 are originating in ECC.
Transactions T2 (With number range 1000 to 2000) and T1 are originating in CRM.
We need transactions T1, T2 (With number range 10000 to 20000) and T3 to flow back to CRM from ECC, but not T2 (With number range 1000 to 2000).
I tried to figure out a combination that I can enter in the middleware filter settings but couldn't get one.
Any help in this regard would be highly appreciated.
Thanks and Regards,
Kris.
Edited by: Kris on Jun 10, 2010 7:37 AM

Hi Kris,
Can you check if you can add the Number range filter value in Table SMOFFILFLD and then maintain the number range filter to restrict the T2 transaction type as per your scenario.
Hope this helps.
Regards,
Chandrakant

Can you copy and paste camera raw filter settings for video?

I have just learned how to use the camera raw filter for color correcting my video clips. Is there a way to copy the settings for one clip and apply it to another? How do you do this?

If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Applying presets causes filter settings to get corrupted if process version updated

I have an ongoing problem with Lightroom 5.7 including earlier versions. The problem occurs when editing photos which use previous process versions (ie, 2010). My presets all have the Current Process version checked (as they should). Whenever I apply any preset to a photo, the settings for existing filters get corrupted (reset to 0). This includes my Graduated Filter settings, Adjustment Brush settings and Radial Filter settings. Those filters and their masks remain on the photo but their parameters have all been set to zero. I keep falling into this trap since it's natural to use my presets when making updates to photos. Often I don't realize this occurred until it's too late.
As a work-around (inconvenient) I can first manually update to the current process by right-clicking the photo and saying Settings/Update to Current Process (2012). Or by clicking the Lightening Bolt button in the upper right corner. But this must be done prior to applying any presets and I typically for get as my database has tens of thousands of pics. Even a preset with just the Process Version set will cause the filter settings to be corrupted. I'm not interested in applying a batch or Quick Develop process to all at once since I need to inspect each one as the process is updated. It would be great if this could be fixed in a maintenance release since it keeps biting me. I think it's important that this be fixed in LR 6.0 also. No doubt it's messed up many user's photos without them realizing it. Does anyone know a work-around so Presets can be used?
System: Win7 pro 64 (current), 4.2 GHz i7, 12GB, Lightroom 5.7.

In my opinion: not a good idea to convert old photos en-batch.
Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
There are more than one reason:
* As you know, process conversion yields very different results (if photo has been substantially edited).
* It takes some time to polish your PV2012 editing skills.
* Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
Rob

Equipment replication with new filter settings

Hi all,
ECC-CRM middleware settings are already in place. I then added status of the equipment as a new filter (Table-JEST, Field-STAT) as two lines (one for system status and one for user status) in R3AC1.
Delta replication is happening fine.
When i try to do initial load, no equipment is replciated for the filter settings maintained.
In R3AM1, i see the block size as zero.
Can someone help me on this?
Regards,
Gowri

Hi Gowri,
Have you found any solution for this? We are also having same requirement, if you found any solution kindly share.
R3AC1 Question : How to add unallowed / non-standard filter settings?
I have implemented this logic but CRM_EQUI_DMBDOC is processing successfully. I need to restrict the equipment object based on status. please share if you got any solution.
Thanks,
Vijay

Filter Settings

Am trying to install Photo Elements 9 onto my new Windows 2010 Program and it asks for changes to my filter settings. How do I do this and at the same time set Photo Elements as my default for photos?

Hi Marco,
From your bapi Response-> draw the flow to table. In the table you would have the employeeUnit field already, add then a inputfield for Carclass.
Click on the carclass field on the right side (Configure panel) -> then value -> double click on fx / Define expression - > You would see the pop-up of Dynamic Expression Editor.
=IF(@employeeUnit==K4,"compactclass",IF(@employeeUnit==K5,"upper class ","whatever"))
You can use this filter if there are fewer employeeUnits....
Good Luck,
Dharmi

SLT Filter Settings to Quality

Hi,
We have recently upgraded our SLT system from DMIS Add on to SP7 from SP4.We exported the filter settings of all the tables from LTRS of our DEV system.Then we tried to import the filter settings in QA system but changed fileds are not getting populated.View Modification Overview is showing all the fields.
Can anyone suggest how to carry out Table settings change across the landscape in SP7?

Hi Roy,
Central Note: 2016511- Installation/Upgrade SLT - DMIS 2011 SP7
https://websmp207.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=&_HIER_KEY=5011000358700000…
Regards,
V Srinivasan

[EWS][Java] How can I use the Search Filter only mails with attachments?

Hey,
I'm trying to search a folder ( doesn't matter which ) for ONLY mails with attachments.
How can I use the search filter for that purpose?
Thanks!

You can drag the attachment collumn from settings and sort on that collumn
In the main Outlook window, on the View menu, point to
Current View, and then click Customize Current View.
Click Fields. In the Available fields list, click the field that you want to add, and then click
Add.
Come back and mark replies as answer if they help, and help others with the same problem. If this post is helpful please vote it as Helpful on the left side.

Loading filter settings..HOW?

In the past I had created some preference settings for filter 'smart sharpen'. I always assumed that in case of reinstalling CS3, it would be possible to insert my old CS3 recepies from back-up.
But I seem to hit a brick wall;
Where does CS3 save its smart sharpen recipes?
I noticed search cannot find a recipe either by file name or inside a file.
What is the file name were filter settings are stored?
Can I just overwrite with previous CS3 preferences? (there are no custom preferences in this CS3 yet)
And is it possible to import old CS2 preferences for filters?
Thanks,
Mathilde

You can save Smart Sharpen settings here:
Your CS3 settings are in:
C:\Documents and Settings\User name\Application Data\Adobe\Adobe Photoshop CS3\Adobe Photoshop CS3 Settings

Extended Notifications - Filter Settings

Hi, could someone please teach me how I could include a list of tasks for the filters in filter settings? I noticed that there is a limitation of 14 characters only and I couldn't create more than one parameter "Task".
Thanks,
Yen Li

Hello,
You can add more task simply creating new entries and adding 1 to the index field. I mean you can have several task as follow:
Parameter-Index-Value
TASK-0000-TS90000001
TASK-0001-TS90000002
TASK-0002-TS90000003...
Hope it helps.
Regards,

I want to SHARE Sync Settings with my Family Members, How Can I Share Some of My Settings with Them.

I want to SHARE Sync Settings with my Family Members & Friends, How Can I Share Some of My Settings like tabs, bookmarks, browser extension with them. Also it is obvious I would not like to share my Passwords. Can you please help. This feature "Sharing with Friends & Family Members" is functional in 'XMARKS Sync'.

All apps are forever tied to the Apple ID used to originally obtain them. They cannot be transferred to another Apple ID, nor can they be updated using any ID other than the ID used to originally obtain them.

How can I create a search filter on my muse project?

How can I create a search filter on my muse project like the 'sort by' function of this website? http://trufcreative.com/work
By that I mean be able to narrow down the content displayed on a single page (preferably with an animation) without having the switch pages or reload the browser.
I'm assuming this isn't something Muse can do natively, but if anyone knows the code, and how to make it work with Muse, that would be awesome.
Cheers!

yes i have same problem. i couldnt create one. please help me

I have removed my iPhone from icloud and it is no longer on the device list however I can still see it in icloud settings

I have taken my smashed (unusable) iPhone into apple for repair today and followed their instructions beforehand, removing the phone from icloud through my PC. However the guy at apple could not do anything as he said it was still connected to i cloud. On checking my account, my phone is no longer on the device list but can still be seen in icloud settings. He was stumped and asked if I had set up another apple id and maybe forgotten about it (I definitely haven't, I've had the same account for 6 years,) his other explanation was a technical glitch. I'm now stuck with a broken phone and a £60.00 a month bill and also pretty annoyed about the wasted 3.5 hour round trip. Any ideas please? It would be much appreciated

Hello
Try restoring the device and setting up as new.
If it is still shows an iCloud activation lock, then it's on an iCloud account
The wrong device was removed from an iCloud account.
Check any other Apple IDs you might have at
iCloud.com
Get signed into them and remove that device.
I wish this was the first time I seen this.
Best of Luck

HT4759 I now have my daughters iPad can you please tell me why I can't set up iCloud.in settings the iCloud is greyed out also how do I change her mail account to mine?

I now have my daughters iPad can you please tell me why I can't set up iCloud.in settings the iCloud is greyed out also how do I change her mail account to mine?

To change your iCloud ID or password you have to go to Settings>iCloud, tap Delete Account, then sign back in with your other ID. If you need to migrate any of your daughter's iCloud data to your account, choose Keep on My iPad when prompted, then choose Merge to upload it to the new account. If not, choose Delete from My iPad.

Can I "keyframe" or "animate" filter settings on a clip?

Similar Messages

Maybe you are looking for