Can I know what combinatio​n works as ctrl + break in DM4-3050US​? There is no marked 'break' key!

1.HP Pavillion DM4-3050us
2. Windows 7 Ultimate
3.No error. How to question.

Hey AK1971,
I see that you're having a issue with the shortcuts on your keyboard.
Try this document for me. 
Also, Check your keyboard and tell me if you have a key that says " pause "typically that is the Break key for most keyboards.
THX 

Similar Messages

  • I don't know what graphics cards work in my mac!

    Hi!
    I want to upgrade the graphics card in my 2006 Intel imac but I don't know what cards will work.
    my specs are:
      Processor Name:          Intel Core Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      Memory:          2 GB
      Graphics Card: ATI Radeon X1600

    This is what I thought also. But, FWIW, someone in a similar thread in which I posted the same answer as Kappy, replied as follows:
    This is not true iMacs use an mxm card it's also used in many laptops. You can buy cards on eBay and such and replace them my mxm 8800gs failed (really a gts) and I bought a used one with a ati 2600? Been a while so I'm not sure of the ati number. I did remove the card and put it in my iMac. I hate the urban myth that you can't change a card in an iMac is it's just not so. I do believe it has to be an apple card though and you might want to watch model compatibility.
    https://discussions.apple.com/thread/2781236
    Anyone know any more on this?

  • Hello, I want to post about adobe color on my blog.. so can I know what is performance property of adobe color??

    hello, I want to post about adobe color on my blog.. so can I know what is performance property of adobe color??

    Just as of late I noticed that Apple Stores are selling security cameras that work with their app on an iPhone. Very expensive but it uses both WiFi when local and cellular when not at home.
    In your case I would check the apple store and see if there is a free or paid app to access your home closed circuit TV system. The cameras have to have their own ip address so you then need only enter that and access will be available to you. But they must be on your home network.
    a lot of the higher end CCTV systems have a free app that can be used like the new Apple Security system.
    Just Google it or check the store.
    Good Luck

  • Hi this pandu can i know what is the diff between pnp &pnpce ldb

    hi,
       this pandu can i know what is the diff between pnp &pnpce logical database.
    thanks and regards,
    pandu.

    pretty much the same.. except that PNPCE has additional functionality to deal with Concurrent Employment.. PL go through <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm">SAP Help</a> for more info.
    ~Suresh

  • What is the last version update in apple tv and how can i know what is my Operating System

    What is the last version update in apple tv and how can i know what is my Operating System
    i have an apple tv 3
    thx

    6.1
    Settings > General > About > Apple TV Software

  • Plzzzzzzzzzzzzzzzzzz till now I can not know what ...

    plzzzzzzzzzzzzzzzzzz till now I can not know what are the problems in new firmware V15 of N95 8G and what are the problems Nokia has solved in new firmware V15 in compare with V11??

    The software was performing update for my nokia N95 8GB (firmware is V11.0.026), it was 85% update until I received the message software update failed.
    I look at the mobile phone and it was down,and I could not restart it.
    I think it could not restart the new software, unless there are some internal software that could not be removed.
    I went to the nokia maintenace dealer and they install me the same software I used to have
    This was 10 days ago.
    Need some advise from you to update to the new version.
    There is also a problem for Flash lite 2.0 in the firmware V11.0.026

  • Can I know what is the process for us to do Good Return from customer?

    Can I know what is the process for us to do Good Return from customer?

    hi
    this ques need to be posted in sd forum..
    to answer this u can use order type RE to create Return order and then u can do the goods receipt..
    or u can use the process mentioned in first reply.
    regards
    CMM

  • How can i know what transaction is handle by the TM?

    How can i know what transaction is handle by the TM?

    Hi;
    Please see below
    E-Business Oracle Trade Management Product Information Center [ID 1297829.1]
    Regard
    Helios

  • How can i know what SubVI is on SubPanel?

    How can i know what SubVI is on SubPanel?
    In the main of my application i have three subpanels that open many different SubVI, i need to know what reference of subvi is actually open
    what could be the best way to do it?
    thanks,
    Andres

    I'm not aware of a way of directly getting the VI reference from the subpanel control after a VI has been inserted into it. Seems like an oversight to me if it's not there. This means you will either have to create a mechanism for saving the reference that's currently open at the time that you invoke the "Insert VI" method, or you can use a roundabout means like getting the run state of a VI or reading an indicator's value, as mentioned in this thread.

  • I am planning to buy an iphone 3g with airtel, can i know what all accessories will  be included in it,

    i am planning to buy an iphone 3g with airtel, can i know what all accessories will  be included in it,

    Thanks for ur reply. I will make sure that I buy 4s from nearest istore in USA where unlocked phones are also available. And yes I know about the warranty which is applicable only in USA. Ur reply has been very helpful for me thanku

  • HT4972 Hey Hi, I have an iphone 3G. i need to upgrade the latest ios. Is that possible? If yes can I know how? If not can I know whats the next possible upgrade?

    Hey Hi, I have an iphone 3G. i need to upgrade the latest ios. Is that possible? If yes can I know how? If not can I know whats the next possible upgrade?

    The iPhone 3G will not run anything higher than 4.2.1. It's been discontinued for over 3 years.

  • Can I know what deffence are there in between "PowerPivot" and "Power Pivot" ?

    Can I know what deffence are there in between "PowerPivot" and "Power Pivot" ?
    I want to use collect one.
    I found both "PowerPivot" and "Power Pivot" in Microsoft Web Site.
    ex. http://office.microsoft.com/ja-jp/excel-help/HA102893837.aspx
    Regards,
    Yoshihiro Kawabata

    Thank you Darren.
    Yes, I think "Power Pivot" correct now.
    But I don't found any official annouce "PowerPivot" to "Power Pivot" in Microsoft.
    and There are "PowerPivot" in Microsoft Japan's documents.
    and My friends are using "PowerPivot" in their books that published at Apr/2014.
    I am looking forward official annouce.
    I want to use official word.
    Regards,
    Yoshihiro Kawabata

  • Can I know what is "Commit" after failover to Azure ?

    Can I know what is "commit" after failover to Azure ?
    I want to know "Commit" button of protected items.
    SETUP RECOVERY: [ Between an on-premisese Hyper-V site and Azure ]
    After failover from on-premis Hyper-V site to Azure, Protected item show "Commit" button.
    "Commit" Jobs include "Prerequisite check"  and "Commit".
    Regards,
    Yoshihiro Kawabata

    In ASR Failover can be thought to be a 2 Phase Activity.
    1) The Actual Failover where you bring up the VM in Azure using the latest recovery point available.
    2) Committing the failover  to that point.
    Now the question in your mind will be why do we have these 2 Phases. The reason for this is as follows
    Lets say you have configured your VM to have 24 recovery points with hourly App Consistent Snapshots. When you failover ASR automatically picks up the latest point in time that is available for failover (day 9:35 AM). Say you were not happy with that recovery
    point because of some consistency issue in the application data, you can use the Change Recovery Point button(Gesture) in the ASR Portal to choose a different recovery point (say an app consistent snapshot from 9:00 AM that day) to perform the failover.
    Once you are satisfied with the snapshot that is failed over in Azure you can hit the Commit Button. Once you hit the commit button you will not be able to change your Recovery Point.
    Let me know if you have more questions.
    Regards,
    Anoop KV

  • Can i know what are the thumb rules of sap r/3

    hi,
    sap gurus,
    good afternoon to all,
    can i know what are the list of thumb rules of sap r/3.
    plz
    regards,
    balaji.t
    09990019711

    Hi,
    Please Follow link
    http://www.dbis.ethz.ch/research/publications/19.pdf
    Thanks,
    Raja

  • How can i know what redemtion code i have ?

    how can i know what redemtion code i have ?

    You read the email from the vendor who sent you the code if you purchased online, or you look at the box you bought with a redemption card inside if you bought in a store
    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Maybe you are looking for

  • Hd make strange sound

    Hi I buy one Imac 27 1 mounth ago and now the Hd make very bad sound i don't know this is the Hd Ata serial ST3500418AS somebody can help me sorry for the bad english i come from Italy

  • Looks like bugs instead of text on the net?

    when im surfing the net in various different browsers bugs (image) appears on my screen not letters..... images and flash are fine only text is affected .... how do i fix.... im a new user in the mac world powerbook g4   Mac OS X (10.4.4)  

  • Examples for using the Flex-Ajax-Bridge

    All samples that ship with BlazeDS use pure Flex on the client-side; what I would like to have are samples that show the Flex-Ajax-Bridge in action; using BlazeDS/LCDS as the data exchange engine; and then use this engine's capabilities to do Ajax st

  • Queries to hussein and others

    Hi people/Hussein, I have few queries which i dont understand clearly.please correct my doubts. 1) how can find the modules/products which have got installed in my oracle applications database is there any table from where can i query? will patchsets

  • Mac Pro OSX 10.10 can't control volume in iTunes with keyboard

    I can't control volume in iTunes with keyboard