Can I launch more than 5 web-sites using Muse? how?

Hi,
Can I launch more than 5 web-sites using Muse? how?

You can use Muse to design and build as many websites as you wish; just purchase the URL's and hosting as appropriate. Your subscription to Muse allows for unlimited authoring.
Now, if you're referring to support via Business Catalyst, that's a different story...

Similar Messages

  • Can I launch more than one instance?

    Can I launch more than one instance of the same AIR
    application?

    Check out page 309 of the AIR Dev Guide "Only one instance of
    an AIR application is started. When an already running application
    is invoked again, AIR dispatches a new invoke event to the running
    instance. It is the responsibility of an AIR application to respond
    to an invoke event and take the appropriate action (such as opening
    a new document window)."
    It looks like we have to handle this InvokeEvent.INVOKE event
    and programatically create a new instance of the application.
    If anyone's done this already an example would be a big help
    as this will be a VERY common use case.

  • How do I get Firefox to display more than one web site that I am developing using Localhost command?

    I write the html code for the four web sites I develop and the one I maintain. I want to view the sites before I put them on the internet. I am able to do this with only one of the five. What, if anything, to I have to change in the browser to allow me to do this? I have edited the host file to include the names of the files on my computer of each of the sites. What should I do now?

    You'd like to be able to access each site with its own locally-hosted url, correct? (for example- http://localhost1/, http://localhost2/ etc, )? That's a ''server'' setting, rather than a browser one.
    How it works will depend on what software you are running to serve the pages. ''Apache'', for example, uses [http://httpd.apache.org/docs/2.2/vhosts/ Virtual Hosts] (and in this case, specifically [http://httpd.apache.org/docs/2.2/vhosts/name-based.html Name-based Virtual Hosts] ). There's usually an example in the configuration file to experiment with (be sure to back it up first).

  • How can I have more than one mobleme site?

    I currently have two registered domains with godaddy.com and created a website with one of them on iweb and published it to my mobile me account. However I want to create a second website on mobleme. I have another domain that I want to use and publish to mobleme, but have discovered I can't. It appears that I can have only one domain registered to mobileme. Is there anyway of add my other domain and also host it on mobileme under another name other than the one I already have?

    You can have only one domain re-directed to MobileMe via CNAME. You can have more domains re-directed to MobileMe via Web-forwarding — with or without masking. Read more here:
    http://iwebfaq.org/site/iWeb_Domains.html

  • How can I public more than one iWeb site ?

    Dear iLife users, I have a website http://www.inmokvc.com created with iWeb a couple of years ago and still online, now I would like to bring online a second website also created with iWeb but can't bring it online: I have a new domain name for my second site but how can I get 2 diferent sites online at the same time ?

    can't bring it online:
    What is happening exactly?
    I have a new domain name for my second site but how can I get 2 diferent sites online at the same time ?
    You just publish your second site to MobileMe and use url forwarding to point your second domain name to your second site. It is exactly the same thing you did with your first site, the only change is that the url you forward to is different, i.e http://web.mac.com/konstantijnvc/secondsitename

  • Can i purchase more than one subscription and use ...

    Hi,
    I have bought a 60min/month subscription and realised that it is too little. I finish 60 minutes before the month is up and have nothing left. I am paying for it in 3-month cycles. 
    Can i buy another same subscription on top of this one so that i get a total of 120 mins a month? 
    When i try to do that, it says the new subscription will only activate after the current billing cycle is over. Does that mean that the new subscription will only start after 3 months is over? Then what is the point of getting multiple subscriptions if you need them immediately?
    Please let me know how i can add more minutes apart from buying Skype credit. 
    thank you,
    tabitha

    Hi Tabitha,
    If you want to have more minutes per month available, you need to buy a subscription with a different amount of minutes.
    If you purchase the same amount of minutes, you will just extend your subscription for another months.
    Here are your options: http://www.skype.com/intl/en/prices/pay-monthly/#SG
    I hope it helps!
    If my answer helped to fix your issue, mark it as a Solution to help others.
    Thank You!
    Please send private messages only upon request.

  • HT204380 Can I broadcast live on a web site using my iphone4 or ipad2?

    Is there any way that I can Broadcast Live using my iPad2 or my iPhone 4.
    Are there any apps that I can purchase to do so?

    Try using iWeb SEO.  You'll have to publish your site locally or access your site on the server but SEO can add keywords, page titles and descriptions, etc.
    Click to view full size
    OT

  • 10g BLOB/CLOB can we store more than 4k in SQL

    Dear Friends
    I know we had issues with BLOB and CLOB storing more than 4k in Oracle 8i using SQL. Is it the same in 10g BLOB/CLOB can we store more than 4k in SQL?
    Please help me with some documentationw which explains these aspects with CLOB and BLOB in 10g
    Thanks
    Farouk

    Thanks for your help,
    I understand we can store blobs more than 4k in 10g using DBMB_LOG but there is a constraint in 8i that using SQL u can store directly only 4k and using a bind variable in PL/SQL we can store upto 32K. Is that the same in 10g or can we store directly using sql more than 4k?
    Thanks
    Farouk

  • More than 1 preparedStatement  object using batch update

    Hey how can I execute more than 1 preparedStatement object using batch update..Pls explain with a code(java)
    Thanks

    // turn off autocommit
    con.setAutoCommit(false);
    PreparedStatement stmt = con.prepareStatement(
         "INSERT INTO employees VALUES (?, ?)");
    stmt.setInt(1, 2000);
    stmt.setString(2, "Kelly Kaufmann");
    stmt.addBatch();
    stmt.setInt(1, 3000);
    stmt.setString(2, "Bill Barnes");
    stmt.addBatch();
    // submit the batch for execution
    int[] updateCounts = stmt.executeBatch();
    search in google for more information

  • Profiles - I have an iPad 1st gen, run iOS5 have have a Profile set up with Lotus Notes to get work email. I want to get a VPN so i can access blocked sites as I travel around the world. The VPN will install a new profile. Can I have more than one

    I have an iPad 1 and have a profile set up with Lotus Notes for work email.  As I travel around the world I want to install a VPN ( my companies uses a VPN but it is only for work)  so I can visit blocked sites.  When I install the VPN it want to change the profile.  Can I have more than one profile on the iPad or will the VPN overwrite the Lotus Notes profile?
    max

    Yes, you can have more than one profile installed.

  • Can you host more than one site on one webBasic account?

    Can you host more than one site on one webBasic account?

    Hi,
    Basically not how this was intended for. 
    You'll have the option to have a partner account which you can create various sites within your portal where each site will be under its own plan. 
    Or you'll have an existing account which is designed for one site.  So I would say ideally no but you could add multiple domains to a site account under one plan, but then you'll need to share the same account (meaning one shop, one set of system messages, layout, etc). 
    Those are the options at this stage.
    Hope this helps!
    -Sidney

  • I just upgraded to Mountain Lion.  Now I can't open more than one website at a time.  When I do the first site, minimized and in the dock, is taken up by the second one.

    I just upgraded my computer from Snow Leopard to Mountain Lion.  I used to be able to have as many websites open as I wished.  Now when I open a website and minimize it, it minimizes and moves to the dock just like it used to do.  But now when I open a second website, it takes the place of the first one down in the dock that was minimized.  I can't open more than 1 website at time now.

    There is something basic going on that unfortunately has me stumped.
    Before you spend the $20 please try creating a new user, for testing purposes:
    Creating a temporary account to isolate user-specific problems: Isolating an issue by using another user account
    That is easy enough to accomplish. If Safari and the Dock behave as you expect while using that account, it will help determine the cause. Please report the results of this test.
    Delete the temporary account after you finish testing.
    Many of those features I mentioned are new in Mountain Lion, and represent a significant change from Snow Leopard. Though you should certainly continue to use your Mac the way you have been accustomed to using it, you may find using Mountain Lion's new features advantageous. If you are fortunate enough to have an Apple Store nearby, you would benefit by taking advantage of Apple's many free workshops: https://www.apple.com/retail/learn/
    Otherwise you may find yourself spending the $20 often. The help available here is often better than Apple's. It is not always correct, but it is always free.

  • More than one web page on .Mac?

    I already have a personal web page set up, but would like to set up a page for my Rotary Club. I don't want everyone to have to go thru my personal photos, etc just to see Club calendars and upcoming events. Can I have more than one site if I have storage room available?
    2.1 GHz PPC G5, 1.5 GB DDR   Mac OS X (10.3.8)  

    rcfgunkie,
    Welcome to the discussions.
    Navigate to your Web/Sites folder on your iDisk using the Go menu in Finder, and following this path:
    Go/iDisk/My iDisk/Web/Sites/iWeb
    In the Sites folder on the iDisk, and above/next to the iWeb folder, you will see an index.html file. Using the Finder again, create a new folder on your desktop and name it iWebIndexFile. Drag the index.html file from the iDisk Site folder into this new folder. It will be copied there. You will use this file again later to bring your short .Mac url back to your original site, as it is now, should you decide to.
    Close iWeb.
    Create a new folder on your desktop, and name it for the new site.
    Navigate to your Domain file, following this path.
    While holding down the option key, drag this Domain file into the new folder. It will be copied there. Create another folder on the desktop, and name it BackUpDomain. Option-drag the Domain file again, into the BackUpDomain folder. Now place this backup folder in your Documents folder. Close the Finder window, and open the folder which is named for the new site. Double-click on the Domain file inside.
    iWeb will launch, and you will see your site as you have always seen it. The first thing you need to do is rename this site in the Site Organizer, giving it the name of your new site. Otherwise, it will overwrite the existing site on the iDisk when you publish it. Now delete the pages you do not want to keep, and create your new Welcome/Home page with the appropriate links in the navigation menu for this "new" site. You may also need to rename your pages. File/Publish to .Mac.
    You now have two separate Domain files, containing two separate sites. When you launch iWeb, the application will open the last site that you edited. Create another folder, and name it for the original site. Navigate back to the path you used earlier for your Domain file, and again, holding down the option key, drag this Domain file into the new folder which has the name of your original site. Now you have two folders on your Desktop, each containing a individual Domain file, for your two sites. (You also have a backup of your original Domain file containing your original site, in your Documents Folder.) Create one more folder, name it Domains, and place both of these "Site" folders inside of this folder for good organization. From now on, to open either of your sites, choose the appropriate Site folder in the Domain folder, open it, and double-click on the Domain file inside. iWeb will open that site for you.
    If your short .Mac url is pointing to the "new" site, and you do not wish for it to, navigate back to your Sites folder on your iDisk and replace the index.html file with the one you copied earlier; also, use the copied index.html file to replace the one in the iWeb folder which is next door to the Sites folder. Your short .Mac url will now point back to your original site, and you will access your "new" site using the url web.mac.com/username/iWeb/nameofnewsite.
    Mark

  • Can you have more than one movie per page?

    Hi, I am creating a web site and have some movie content on some of the pages. Can you have more than one quicktime file on each page? Reason I ask is that on one page I have put 3 movie files but only one shows up when I run the site online. I am not using .mac. The website is on grapeape dot co dot uk and if you look at the examples page you should see what I mean. I get one video that works and 2 large "Q"'s where the other videos were. Odd because it works locally. Any ideas? Many thanks.
    Ben

    Just noticed something. If you leave it until the first movie caches or preloads - the second one appears. Is there a way round this at all? Thanks. Ben

  • Problem with image control using more than 1 web cam

    Hi,
    I am using logitech quickcam pro 4000.Actually I want to get image from
    3 web cam at a time wich will act as a CCTV.I want to get picture from
    more than 1 web cam at a time.But,When I start the .vi,than I get image
    from 1 web cam.I have attached the vi and the demonstration file.
    If anyone  has any idea please send me a reply.
    (The code was constructed using information
    from the Logitech Software Development Kit, downloaded from the Logitech web
    site January 4th 2004.  This
    package includes the royalty free distribution with the camera driver.
    To install the package, download and unzip
    LabVIEW Logitech UWA.zip and run Setup.exe in the 'redist' folder.  This installs drivers (if not already
    installed).  Then run LabVIEW and open
    Logitech Image Acquisition Master.vi. 
    Click the LabVIEW run button.
    Notes for Understanding the Code
    [1] The camera is controlled by an Active-X
    reference from a front panel Acitve-X container that displays the pre-view
    image.  To create this, create a blank
    Active-X container on the front panel and select the Active-X Hydra Video
    Portal class.
    [2] Three methods are called, following the
    Visual Basic guide from Logitech.  The
    first establishes a connection to the Active-X server.  The status bar is activated in the preview
    window (EnableUIElements), and we connect a camera (ConnectCamera2).
    [3] Here we set the value of property
    'EnablePreview' to turn on the preview panel.
    [4] We can get the camera description for
    camera zero here (the first camera connected).
    [5] Here we select the video format (64x480
    – can change it later).  The next call
    establishes the preview size by setting property values.  The preview size should be the same as the
    video format for fastest image acquisition.
    [6] We are restricted to saving the picture
    to a BMP file and then reading it in again. 
    This is a limitation of the SDK. 
    After reading the image file we can change it to a JPG if we wish to.
    [7] Here we re-read the image file and
    provide it to ImageDisplay.vi.
    Other methods and property values are
    reasonably self evident.  In LabVIEW, if
    you right click the Active-X reference terminal on any method, you can create a
    new method by simply selecting the appropriate one from a list.  The parameters for the method appear
    automatically and should be reasonably self-evident from the names.  If you want more details, download the SDK
    from Logitech.
    Other methods allow you to make movies in
    real-time or time-lapse sequences.
    Note that you can also monitor Active-X
    events to detect inputs or parameter changes made elsewhere.  For example it is possible to detect when
    the button on the camera is pressed.)
    Thanks
    Kabir
    Kabir mamun
    PhD Student,DCU
    [email protected]
    www.iward2010.blogspot.com
    Attachments:
    Logitech Image Acquisition Master.vi ‏98 KB

    Hi Peter,
    Thanks for your e-mail.And sorry for late.
    I have changed my activex server in my labview programme.Current 
    server name is XVideoOCX.I have attached 1 example.Still I am facing
    the same problem that I am not getting disply from more than 1 web
    cam.So would you be able to advice me,what should I do regarding this
    matter.
    Actually,This is a part  of my M.Sc project.I am under pressure.Peter,Please do me  this fevour.
    Thanks
    Kabir
    1 eample from help file:
    Video Disply
    1. Choose the input mode (Video, Single Image Files, Screen, etc.)
    XSetInputMode(0) // This
    chooses video as input
    2. Choose the video device
    XSetVideoInput(0) //
    Choose the first available video input device
    3. Initialize XVideoOCX
    XInit() // Initialize
    XVideoOCX
    4. Start internal video capture
    XStart()
    now XVideoOCX should display the live video
    5. Stop internal video capture
    XStop()
    6. Close XVideoOCX
    XClose()
    Kabir mamun
    PhD Student,DCU
    [email protected]
    www.iward2010.blogspot.com
    Attachments:
    ax2.vi ‏23 KB

Maybe you are looking for