Can I Leave My Notebook plugged in even if it's fully charged??

I queued up a TV series for downloading and it's gonna take me more than 12 hrs. And my battery backup is just 2 hrs.
So, I was wondering if the battery/notebook is affected in anyway if I leave my notebook plugged in over night for about 10 hrs. 
BTW, its hp pavilion g4-1015dx .. if it somehow matters !!!
This question was solved.
View Solution.

Hi,
That's perfectly Ok, your notebooks power board automatically regulates the charge to the battery.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Is it OK to leave the power plugged in when the computer is fully charged?

    I often have my MacBook Pro on my desk and it's a pain charging it up then running it down all the time. Would it be OK to just leave the power plugged in all the time? Is it bad for the battery or not?
    Cheers.

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro

  • Can I leave my ipod plugged in and on all the time?

    can I leave my ipod plugged in and on all the time?

    That will degrade the battery. Apple recommends that you fully discharge and fully charge monthly.
    Apple - Batteries - iPod

  • TS1713 My mac sometimes will not power up even though it is fully charged and no matter how many key's I touch will not bring it on. It comes on after about 10 minutes and I have to shut down about 6 windows before I can open up a browser.

    My mac will not power up even though it is fully charged. It only happens occasionally and when I try to power up after about 10 minutes it comes to life but has 6 or 7 windows that I have to close in order to open up my browser.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    3. Start up in Safe Mode.
         http://support.apple.com/kb/PH11212

  • Can i use my mac on power supply when battery is fully charged??

    can i use my mac on power supply when battery is fully charged??

    Keep the computer plugged in whenever possible.
    If you keep the computer always plugged in, make sure that twice a month
    run it on battery until battery level drops to about 50-40%.
    Maximize Runtime / Tips for maximizing your battery charge
    http://support.apple.com/kb/HT1446
    More about batteries:
    http://www.apple.com/batteries/notebooks.html
    Macbook Pro Battery Cycle Count
    http://support.apple.com/kb/HT1519

  • HT201412 the iphone keep switching off even the battery is fully charged.

    please can you help me solve this problem? My iphone keep switchs off. even the battery is fully charged.

    some one should help....

  • IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  Please help

    IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  I did restore the iPad about 8 times during the past 2 weeks.  Just completed another restore.  iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready.  That was 30 minutes ago.  iPad still won't start.  I am looking down the barrel of yet another fruitless restore.  What a crap product.

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • HP 4530s system is not powering on from the battery even though battery is fully charged.

    the system cannot power on from the battery even though battery is fully charged.
    below video shows exactly what am experiancing for the past 4 month.   please is there any way out.....?
    <iframe width="854" height="510" src="//www.youtube.com/embed/ucVdOCbRHIE" frameborder="0" allowfullscreen></iframe>

    some one should help....

  • Can I leave my ipod plugged into my car

    ccan I leave my ipod plugged into my car?

    That will degrade the battery. Apple recommends that you fully discharge and fully charge monthly.
    Apple - Batteries - iPod

  • When I go into an app, it powers of my phone, even when it is fully charged. The only time I can go into an app is if it is plugged in

    phone powers off when I go into an app

    Hello, kelsiediaz. 
    Thank you for visiting Apple Support Communities.
    I would recommend starting with the troubleshooting steps in the article below. 
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    Here are some additional troubleshooting steps to go through when experiencing this issue.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    If the issue persists, see the section labeled Issue not resolved.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    Jason H.

  • My MacBook pro won't turn on, even though it's fully charged. I can hear a disk chime but nothing on the display. Help?

    I'm having an issue with turning my MacBook pro on. It's fully charged and when I press the power button I hear a disk chime but nothing happens on the display. Can anyone help please?

    Tried connecting the cable?  Still won't start?
    If you are still under warranty and/or have AC, call them & let them deal w/it.
    OOW:  Take the MBP to your local AS or an AASP.  Diagnostic testing is FREE!
    http://support.apple.com/kb/TS1365 Intel-Based Apple Portables: Troubleshooting a computer that will not power on

  • Why my iphone 3gs turn itself off even when battery is fully charged?

    my iphone 3gs always turn itself off even when the battery is fully charged, i have to plug in the charger to turn it back on. please help.

    Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/

  • MUSIC PLAYS AT A SLOWER BEAT EVEN WHEN  IPOD IS FULLY CHARGED.

    THE MUSIC IN MY IPOD NANO 4TH GENERATION IS PLAYING AT A SLOWER SPEED EVEN WHEN THE IPOD IS FULLY CHARGED. THE MUSIC SOUNDS LIKE IT'S DYING. IS MY IPOD DYING? NEED HELP!

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My macbook model 7.1 will not start up unless connected to power supply even when it is fully charged. Does anyone know the cause of this?

    I have a 4 year old MacBook 7.1 that has worked wonderfully until today. I went to turn on my computer and it would not do so until it had been plugged into the power supply, and it was fully charged. Can anyone suggest what to do to fix this? DO I need to take it to an apple repair tech? Thanks

    Hello ssamaro13,
    I definitely understand your concern with your battery not powering your MacBook when the power adapter is disconnected.  I found a couple of resources that I think might help with this.
    The first thing I recommend is resetting the System Management Controller (SMC) on your MacBook:
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    If your battery is still not powering the computer when disconnecting the power adapter, the next thing I recommend is troubleshooting your MagSafe adapter using the steps in this article:
    Apple Portables: Troubleshooting MagSafe adapters
    http://support.apple.com/kb/ts1713
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My iPod automatically turns off, even when it is FULLY charged!!! :(

    Before I go to school, I let my iPod charge over night so then on my way to school && back I can listen to it.
    It's FULLYcharged and after I listen to 2 or 3 songs it just turns off. Somtimes it says "low battery pleaese connect to computer". (Remember, it's still fully charged!)Even when I turn it back on it eventually does it again.
    What's wrong!

    Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/

Maybe you are looking for

  • Oracle Discoverer integrate with SSO, SYS_CONTEXT function does not work?

    Here is the summary of steps I have already completed: 1. Following the Discoverer configuration guide, I modified mod_osso.conf file. 2. So right now, when I typed http:\\host: 7778\discoverer\plus, it will direct me to the single-sign-on page. 3. T

  • HT3964 MacBook won't re-start

    I attempted to reset the SMC on my Macbook as instructed, and now it won't turn on.  Any suggestions?

  • Languange is not allowed error in service notification

    Just want to ask help regarding the error I encountered in change service notification iw52, when I wanted to put historical description using the Task Long Text, error prompt was LANGUANGE IS NOT ALLOWED. then when I view the diagnosis here's what t

  • Export failed error -1

    It was just a couple of months ago that I was exporting my Motion 5 projects as quicktime movies with few problems.  This week, I'm getting repeated export failures that occur at a different frame number each time, but usually with the error code -1.

  • No re-determining of Header Text, when Ship-to party is changed

    Hi Ravi, Whenever ship to party has changed then header text is not re determining, I am calling 'RV_TEXT_COPY' FM inside the include FV45PFAP_VBAP_FUELLEN_TEXTE , then its saving header text correctly, but this include is calling whenever I click on