Can I load a specific camera/lens profile into LR and if so how?

Can I load a specific camera/lens profile into LR and if so how?

If the camera profile or lens profile is in a Lightroom compatible format (i.e. created by the DNG Profile Editor or Lens Profile Creator) then you can load the profile into LR by putting it into the following folder and restarting LR.
Windows Vista or 7—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.

Similar Messages

  • Camera & Lens Profiles

    Can anyone explain the differences in the Camera Lens Profiles in ACR and the Lens Correction Filter in Photoshop CS6.
    Reason I ask is my D800 and Nikon 14-24mm lens is detected and correction applied in ACR, but the same camera and lens combination is not recognized in the Photoshop lens correction filter. The D800 is nowhere to be found. But interestingly the profiles for the D4 are
    Many folks have asked in the past when the D800 and Canon 5DM3 would be supported but all the attention has been focussed on ACR, so when will these profiles be available for Photoshop Lens Correction?
    Cheers
    MK

    There is no question that ACR provides the Camera/Lens Profiles - this thread is why there is a difference between the Lens Correction built into Photoshop CS6. Many camera and Lens combinations supported by ACR do not show up Photoshop's Lens correction - like the D300 is missing, the D800 is missing - but all there in ACR.....
    What I was hinting at was why is Photoshop not using the same profiles as ACR? Seems strange and more convoluted support model
    Mike

  • Missing LR camera/lens profiles

    I updated to the latest version of Lightroom this afternoon. When I continued with LR, I discovered all my camera/lens profiles were gone. Can anyone tell me what  happened and how I can recover or replace then? Thanks!

    ssprengel,
    Thanks. I've been traveling for two weeks and have not had access so I haven't followed up on your questions.
    Yes, I updated from LR 5.5 to 5.6 and discovered my profiles were gone after that. I did do some other "clean up" on the computer working with the Apple folks to solve another set of issues. It is possible that this is the source of my problem.  Your suggestion is to uninstall and reinstall LR. What precautionary steps do I need to do prior to the uninstall? Any special instructions for the reinstall. I would hate top end up with no LR at all!
    Thanks.

  • Can't load Netflix - Firefox says something about cookie problem and recommends try again button. ("The page isn't redirecting properly Firefox has detected tha

    Can't load Netflix - Firefox says something about cookie problem and recommends try again button. ("The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. This problem can sometimes be caused by disabling or refusing to accept cookies.)" Hit the try again button repeated ly - nothing???

    I decided to give Netflix a call about this problem.
    On a recording while waiting for a support rep, it said if you're having problems logging in to go to:
    http://www.netflix.com/clearcookies
    It works for me. Now I have to logon everytime I go to their site though versus it had kept me already logged in before this problem.
    I will be using that link to get to their site until they get it fixed.

  • HT204053 Can I have two Iphones connected to one icloud account and if so, how do I change the icloud user name on the phone

    Can I have two Iphones connected to one icloud account and if so, how do I change the icloud user name on the phone

    Welcome to the Apple Community.
    Yes you can use one iCloud account between multiple devices.
    What do you mean 'change the iCloud user name'.

  • HT1473 Can I download my own films to my ipod classic and if so, how?

    Can I download my own films to my ipod classic, and if so, how do I do this?

    If you own the distribution roghts to them (home movies for example), then yes. Convert them to a compatible format ( found in the manual) and put them in itunes.  They sync them to the device.
    DVDs that you buy are encrypted to stop you from doing this.  Breaking this encryption is illegal.

  • Can i put my itunes music onto  my partners iphone and if so how?

    can i put my itunes music onto  my partners iphone and if so how?

    Put the music into iTunes on the computer your partner syncs the iPhone with.
    The next time that iPhone is synchronised with the computer, the music will be copied to the iPhone.

  • How can i load a specific CSS style sheet for Safari?

    Okay, So I have some structure issues when viewing my website on Safari compared to Firefox. Is there a way to put a code in the <head> tag to load a specific CSS style sheet for Safari like you can do with IE?
    Thanks.

    I took a screenshot of your page from Firefox (shown below).  I assume you're seeing the same problem in Safari.  If you increase text size one click, the keyboard image drops below the #contact division.
    1) Height is a restiction in all browsers except IE.  Avoid  using height values on containers with text in them.  If needed to show  a background image, use the min-height property.
    2)  Fix your code errors. Some browsers are very sensitive to errors.
    3)  Your #content lacks cohesion. You need 3 columns, each with a width in pixels.  Or simply use a 3-column table.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Why can't I see my camera calibration profiles

    I am trying to use a camera profile created in Adobe Dng profiler to correct my infrared GX1. Also trying to use other downloaded profiles for my camera.
    I have created a new folder with the other profile folders:-  C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.4\Resources\CameraProfiles\Camera\Panasonic DMC-GX1 and placed my profile in there.
    When I look at the profiles drop-down I only see 'Adobe Standard' I cannot see my (or any other) profiles.
    I am using the latest version 5.4 and working with Panasonic .RW2 raw files
    Any help much appreciated !

    Thank you! I found out where it was located in.
    ssprengel wrote:
    If you are asking about custom-created profiles, check this page, for the location of custom camera and lens profiles:  http://www.lightroomqueen.com/articles-page/lightroom-5-default-locations/
    If you are asking about Adobe-supplied profiles, they will be installed every time you update the software so there’s no need to copy them, anywhere, and the reason for not seeing them would be that the current photo is not a raw file since most profiles are only for raw not jpg.
    I found it in here:
    Your custom Camera Raw & Lens Profiles should be installed to the User folders…
    Lightroom 5 no longer uses the shared ProgramData (Windows) / Application Support (Mac) folders for Camera or Lens Profiles. Instead, it stores the built-in profiles with its program files.
    When you create camera or lens profiles, they must be stored in the user locations listed below. If you previously stored custom profiles in other locations, you’ll need to move them to these user folders, otherwise Lightroom won’t be able to find them.
    Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
    Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
    For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
    The camera and lens profile file extensions are:
    .dcpr—camera profile recipe file used for creating/editing a profile in the DNG Profile Editor
    .dcp—camera profile
    .lcp—lens profile
    Thanks again for responding.

  • LR 5.3 missing camera/lens profiles

    Just came back from the camera store after testing out the Nikon Coolpix P7800 and Sony RX100ii.
    Imported the RAW files into LR 5.3 to compare the image quality of the cameras.
    I noticed that I could not assign camera and lens profiles to the photos. I currently have a Nikon P7100 which does show up in the drop down list and have had no problem doing lens corrections for the older camera.
    I thought the P7800 and RX100ii cameras were added in the latest update. Am I missing something?
    Thanks for any suggestions.

    Using the new ACR 8.4 RC, the Sony RX100M2 seems fully supported, but the Nikon Coolpix P7800 seems barely supported. 
    These same conditions are present in LR 5.3.  The only thing new in ACR 8.4 RC is the indication of a built-in profile being used.
    RX100M2 - Built-in lens profile & several camera profiles:
    P7800 - No internal or external lens profile & only Matrix as camera profile:
    P7800 raw downloaded from this page:
    http://www.photographyblog.com/reviews/nikon_coolpix_p7800_review/sample_images/

  • I can't load firefox because it says "Profile Missing- Your Firefox profile cannot be loaded. It may be missing or inaccessible." Can't delete either. Help?

    I have a Mac and I can't open firefox because it says "Profile Missing-Your Firefox profile cannot be loaded. It may be missing or inaccessible." Then I tried to delete it by moving it to trash and it says it cannot be moved to the trash.

    Create a new profile to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Import lens profile into Lightroom 4.3

    Hi,
    As my camera is fairly "old", lightroom does not have a lens correction profile for it. I have created a lens correction profile with Adobe Lens Profile Creator. Now how can I import this profile in Lightroom?
    Thanks

    Are you are on a Mac?  I am on Windows and the locations for the profiles given above are for Windows, not a Mac.
    With LR 4.3, you cannot put the user profiles into the folder with the Adobe profiles.  I can't tell you how things work on a Mac nor exactly where they should go without Googling where user profiles go on a Mac.
    I can say that I put the profile you supplied into this exact folder on my Windows 7 computer and it worked right off, as soon as I enabled lens profile corrections for the JPG:
    C:\Users\Steve\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0\Downloaded
    as evidenced by the righthand panel in this screenshot:
    However, as you can see with the before and after portion of the screenshot, there appears to be something wrong with at least the vignetting correction, because the corners are over-lightened, and almost the entire image is much brighter with the lens profile applied.  I've never created a lens profile to know if what I'm seeing is due to a common mistake when creating profiles such as uneven lighting, or if perhaps the profile doesn't have enough different focal-length combinations so it is applying a correction for a completely different position of the lens and overlightening.  Or perhaps the vignetting has already been corrected in the JPG that was supplied so now it is being double-corrected by applying the profile, again.

  • Missing Canon lens profile into lightroom

    Hi Guys
    I have LR4.1 and I just realized that I am missing the one for my 100-400 f4,5/5,6
    any idea how can I get it ?
    Many thanks
    have a super day, Thierry

    It is possible to save a duplicate of the lens profile file, and "kludge" it from Raw to non-Raw using a text editor. This generally works well enough; much better than manual corrections alone - provided that the camera is not also applying lens correction, and so confusing matters.

  • Can't Place a specific Word 2010 docx into InDesign CS4

    I'm trying to use the Place command to bring the text from a specific Word 2010 docx into InDesign CS4.
    I've successfully brought in several Word 2010 documents (docx extention) to InDesign CS4 documents using the place command.
    I have one specific 30 page document (which is no loarger than others which have been successful), and when I use the place command with this file, nothing happens (and no text gets loaded onto the cursor for placement.
    I've tried re-saving the word doc, even pasted its contents into a new Word doc and still can't get the Place command to work.
    THere's nothing particularly unique about the file - doesn't have any odd embedded content, just a 30 page text document writtin in word.
    Any ideas what could be going wrong or how to fix it?
    I've tried restarting both Word and InDesign without any change (and the rest of my word files can be Placed without problem, so I imagine it's something specific to that file.
    NOTE - re-saving in RTF format lets the Place command work but leaves a bunch of empty squares/boxes (not sure if these were for tabs or empty spaces or what really??)
    Can work around this for now, but would like to know how to get the place command working with decent size Word Docs( docx for word 2010 if that matters).
    Thanks for any help.

    It turned out that for at least one particular document the OP had used some blank paragraphs as spacers at the start of the text, and that the style assigned to the second paragraph used a combination of left and right paragraph indents that was more than the width of the document page, sending the entire document (except for the empty first paragraph) into overset. I can't say for sure, but I think the Word styles might have been mapped to ID styles because I found no trace of the indents in the Word file itself, only in the ID document, and I had no trouble placing that Word file in my own ID test document. I did have some trouble placing another .docx file supplied by the OP in CS4, but not in later versions, and conversion to .doc solved that problem.

  • "can't load because some files are already in use" - Adobe reader!  How do i close whatever i can't find that they say is in use!?

    Can anyone help me get Adobe reader 11 installed??? The error message when I'm practically done says the file can't be loaded because some files are already in use - and it refers to Adobe reader!  What do I do to get past this??? Help!  I need to install adobe!
    I had been having a problem after I tried to do an adobe update, so i deleted and tried to reinstall the program and it won't let me ! Any suggestions???

    Hi Jody414,
    Use the Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) to remove Reader completely from the machine.
    Download Reader 11 from: Adobe - Adobe Reader Distribution   and install and check.
    Regards,
    Rave

Maybe you are looking for