Can I load ms word file in flash using JSFL?

What I want to do is,
Load a .doc file in flash using jsfl
Read it and save its data in xml
Is it possible?

If you have a problem with Word, ask Microsoft.  But I suspect you only came here to post your spam link!

Similar Messages

  • How can I open Microsoft Word files on my iMac?

    How can I open Microsoft Word files on my iMac?

    You can even use the Pages app that is installed on your computer. Finally you can buy a license of Office for Mac and have Word, Excel, PowerPoint and if you want Outlook too.

  • I have converted a pdf to word. How can I access the Word file from my online account?

    I have converted a pdf to word. How can I access the Word file from my online account? When it says 'download the converted file' I choose a location on my PC and click, but nothing happens. It seems that it can only save the converted file to my online account. I went to my online account but I see no way to look for the file

    Hey Fabrizio,
    You might need to sign up at "https://cloud.acrobat.com/exportpdf" using your Adobe ID credentials to convert your PDF file to Word.
    Do you get the 'download' prompt?
    Also, you can find the converted files by clicking at the 'Files' tab. 
    Please try the same using a different browser and check.
    Hope to hear from you.
    Regards,
    Anubha

  • I can't save previous word files I have into iWork's, I have dropped the file into pages, but it says it can't convert text, even though I have changed a selective fond from pages

    I can't save previous word files I have into iWork's, I have dropped the file into pages, but it says it can't convert text, even though I have changed a selective fond from pages! Help!

    Take us through this in more detail.
    What is the Word file? From a PC?
    What version of Word and what is the file extension?
    What is it about the text that is different?
    When you say fond do you mean font/typeface? If so what font, and is it on your Mac? Is there something special/different about this font?
    Peter

  • Can you load a Jpeg file to Photoshop??

    Can you load a JPeg file to photoshop??

    The files are not stored in Photoshop Elements. They are on disk wherever you put them. The Organizer is like a library card catalog - an index, if you will.
    You may find this document helpful:
    FAQ: Where can I download the manual / user guides for Photoshop Elements?

  • Not able to convert word file to PDF using Adobe Acrobat 9 Standard

    Hi,
    I am not able to convert word file to PDF using Adobe Acrobat 9 Standard. When I try to convert, it starts the process and in between I am getting this prompt, as shown in figure below and the conversion process stops. The PDF is not created.
    Note: The filename 'Acr85.doc' in the above prompt keeps changing and is random.
    I tried clicking Yes, No and Cancel on the above prompt, but the conversion process just stops and PDF is not getting generated.
    I am able to create PDFs from web pages. No issues with that. Not working only with Word.
    Can someone help me with this.
    Thanks,
    Vinay Jaassiel Kankipati
    Technical Writer

    In MSWord please changes the settings as "Adobe PDF" menu => "Change Conversion Settings" goto Tab Bookmark and clicks the option Convert Word Bookmarks. Now you convert the Doc to PDF you can achieve the Bookmark.
    Hope this help you
    Sudhakar

  • How can you change individual words in a PDF using javascript?

    Hi,
    I am trying to do some simple text replacement in a PDF file using Acrobat. Specifically, I want to do some simple transliteration of words or partial transliteration. For instance, I would like to change a word like "red" to "ρed". This is to help me get used to the Greek alphabet step by step.
    Anyway, I downloaded Acrobat and there is no feature to do a single letter search and replace -- only word replacement. I have a Computer Science degree and decided to investigate the javascript capabilities to see if I can make those a simple letter replacement script. However, I have gotten to the point where I can cycle through every word in the PDF (using functions like getPageNthWord), and I can make a replacement on the string returned using something like: val.replace(/r/, "ρ"). However, I don't know how to replace the word in the PDF file....such as with a hypothetical function setPageNthWord (which does not exit). I have found the online documentation very thin on this, and I am scratching my head. Perhaps, it is something to do with the PDF format that I do not understand. So, is there a way to simply change text of a PDF file, like I am asking? All I am looking for is simple script to change a letter to another across a PDF.
    thanks if you can help
    Justin

    JS can't edit the text in a PDF file directly. There are workarounds, like
    using a redaction with overlay text or simply placing a new field or
    annotation on top of the old text with the new one, but they are all far
    from perfect and won't cause a "reflow" of the document, so if the two
    texts are not of the same length the result will look odd. Also there's the
    issue of which font to use (font family, color, size, etc.), which JS can't
    know so you'll have to tell it.

  • Data loading from flat file to cube using bw3.5

    Hi Experts,
                       Kindly give  me the detailed steps with screens  about Data loading from flat file to cube using bw3.5
           ...............Please

    Hi ,
    Procedure
    You are in the Data Warehousing Workbench in the DataSource tree.
           1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
           2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
    The DataSource maintenance screen appears.
           3.      Go to the General tab page.
                                a.      Enter descriptions for the DataSource (short, medium, long).
                                b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                                c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
    Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
    In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
           4.      Go to the Extraction tab page.
                                a.      Define the delta process for the DataSource.
                                b.      Specify whether you want the DataSource to support direct access to data.
                                c.      Real-time data acquisition is not supported for data transfer from files.
                                d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
    Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
    Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
    Choose Properties if you want to display the general adapter properties.
                                e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
    You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                                  f.      Depending on the adapter and the file to be loaded, make further settings.
    ■       For binary files:
    Specify the character record settings for the data that you want to transfer.
    ■       Text-type files:
    Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
    Specify the character record settings for the data that you want to transfer.
    For ASCII files:
    If you are loading data from an ASCII file, the data is requested with a fixed data record length.
    For CSV files:
    If you are loading data from an Excel CSV file, specify the data separator and the escape character.
    Specify the separator that your file uses to divide the fields in the Data Separator field.
    If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
    You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
    If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
    In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
    Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
    If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                                g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                                h.      Make the settings for currency conversion, as required.
                                  i.      Make any further settings that are dependent on your selection, as required.
           5.      Go to the Proposal tab page.
    This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
    Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                                a.      Specify the number of data records that you want to load and choose Upload Sample Data.
    The data is displayed in the upper area of the tab page in the format of your file.
    The system displays the proposal for the field list in the lower area of the tab page.
                                b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
           6.      Go to the Fields tab page.
    Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                                a.      To define a field, choose Insert Row and specify a field name.
                                b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                                c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
    Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                                d.      Change the data type of the field if required.
                                e.      Specify the key fields of the DataSource.
    These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                                  f.      Specify whether lowercase is supported.
                                g.      Specify whether the source provides the data in the internal or external format.
                                h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                                  i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                                  j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                                k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                                  l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
           7.      Check, save and activate the DataSource.
           8.      Go to the Preview tab page.
    If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
    This function allows you to check whether the data formats and data are correct.
    For More Info:  http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

  • Can I load batteries from an electrical socket, using the same as my IPhone charger?

    Can I load batteries from an electrical socket, using the same as my IPhone charger?

    Your terminology is confusing...  If you are describing the USB power adapter (that plugs into a wall outlet) that you use to charge your iPhone, you can use the same connection to charge your iPod nano.

  • Can an Access 2013 accdb file be encrypted using command line switches?

    Can an Access 2013 accdb file be encrypted using command line switches?
    I found all the command switches, but nothing about encrypting.  And I've searched online and found nothing.
    Can this be done?
    Thanks!

    Hi Sharon2000,
    I think you could try the Database.NewPassword Method (DAO) in the VBScript file, and you could get more information about it from the link below:
    #Database.NewPassword Method (DAO)
    https://msdn.microsoft.com/en-us/library/office/ff844754.aspx
    Here is a simple demo to achieve your issue.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • Add wav file in flash using as3

    i want to add wav file to flash using as3 externally or
    internally..............

    If you look thru the Flash help files for adding sounds you
    will find the options you have and don't have.
    If you have already tried something and it is not working,
    then provide details of your situation.

  • How can I load a .pst file to an instrument in logic express 9?

    I have some instruments plug-in settings from my old computer that I used with logic, and I want to load them into logic so I can use them on the computer I moved them to. On any instrument I try (ES1, ES2, EXS24 and the rest) it won't allow me to load the files (.pst files) and I know I should be able to. Am I just going about it wrong or using the wrong instrument? How can I load these files so that I can use the instruments again?

    Pages is not in a format compatible for what you want to do.
    After you save a a Pages document, go to File > Export > and choose either Word or Pdf format. You can also choose RTF or PlainText too. Then you can email to yourself or others.
    Good Luck.
    Adam

  • How can I convert a word file into a pdf and then upload to a web site?

    I need to convert a word document into a pdf and then upload it to a web site so people can read it from my
    site. How can I do this? Can anyone please help? I'm only a newbie. Thanking you in anticipation.

    Hi there,
    There's actually an easy streamlined way to do this using Acrobat.com. Here are the steps:
    1. Log in to Acrobat.com with your Adobe ID.
    2. On the left, you'll see a navigation menu that includes the item "Import and Edit". Click that.
    3. Choose the .doc (Word) file you want to convert and upload it to Buzzword.
    4. After making sure that it looks the way you want it to, go to the top menu (still in Buzzword now, not the organizer where all your files live) and click the document menu. There will be an option to "Export" - choose that.
    5. When prompted to select filetype, choose "Adobe PDF" and press OK.
    6. It'll save to your desktop, so now you have to get it into your acrobat.com organizer. To do that, close the Buzzword document by clicking the little "x" in the upper right corner, under the Sign Out button. This'll get you back to your organizer, where you can choose "Import" from the left nav menu again. This time choose your new PDF file.
    7. Select the  file icon in the organizer and click the Share button. Or, select Share  from the file context menu.
    8. Select Allow Anyone With A  Link To Share This Document to set the document to open access, and then  click Copy Embed Code. The necessary HTML code to embed the preview is  copied onto the clipboard.
    9. Open the HTML file and paste  the code into the file. The Flash previewer can display any file type  that you can convert to PDF.
    Hope this helps! Good luck, and let us know how it works out.
    Rebecca

  • "can't load because some files are already in use" - Adobe reader!  How do i close whatever i can't find that they say is in use!?

    Can anyone help me get Adobe reader 11 installed??? The error message when I'm practically done says the file can't be loaded because some files are already in use - and it refers to Adobe reader!  What do I do to get past this??? Help!  I need to install adobe!
    I had been having a problem after I tried to do an adobe update, so i deleted and tried to reinstall the program and it won't let me ! Any suggestions???

    Hi Jody414,
    Use the Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) to remove Reader completely from the machine.
    Download Reader 11 from: Adobe - Adobe Reader Distribution   and install and check.
    Regards,
    Rave

  • How can I mask on flv file in flash cs4?

    Hi,
    I am new to Flash CS4. I saw one video on how to use flv file in flash and mask it. It is working fine when I am using the following option while importing a video file to flash:
    Load external video with playback component
    But when I tried with the following option it doesn't show the background, it shows only movie which is playing nicely. But not the background which has a bill board.
    Embed FLV in SWF and play in timeline
    It seems the mask is not working with this option.
    How to solve this problem? Please help.
    Actually it should be like the above.
    But when I am using the option Embed FLV in SWF and play in timeline while importing the flv video, getting the result like below: It is not showing the Bill board as above.
    See the layers created:

    Hi,
    I Tried with CS4 by creating mask layer and importing video , layers created were same as you have created and it is working for me .
    Here is the screen shot of the .fla file.
    Screenshot of .fla file

Maybe you are looking for