Can I "lock" just one out of my four displays in mission control.

I have a Mac Pro (2013) with 3 monitors and my projector hooked up. I use the projector primarily for videos and entertainment, while i use the 3 monitors for work space. I use up to 6 desktops in mission control and prefer to lock them so they all move together as when when I switch, however then the video is only able to on the projector for ONE of the of those spaces. Is there a way to lock the projector to be independent from the other 3 monitors so i can keep the video on there at all times?
The other issue i have is with FULL SCREEN, it grays out all my other screens and is completely worthless when you have a multiple display setup. How can i make VLC go full screen without this issue?

Eric,
I personally find the Encrypted Disk Image method the most effective means to secure the contents of a folder that other shared users are unable to open. Do not give them the password for this encrypted disk image.
Apimac Secret Folder for Mac, and PuzzlePalace also have have good reputations.
;~)

Similar Messages

Can You Lock Just One Page but not whole site?

I'm sure this was answered -- but now I cannot find it in the topic list.
I want a particular site to be open to one and all. But I want to lock just one page on that site -- which would require a user name and password. My attempts so far end up locking the entire site.
Any suggestions?
Many thanks,
Richard.
Power Book G4 Mac OS X (10.4.2)

if you search this forum for "password one page" you will find some previous posts.
There is one that mentions creating a second one page site and passwording it with a hyperlink in the first site. Might be the way to go. I don't believe you can currently password just one page.
good luck

How can I publish just one page at a time?

I switched to a new computer, so I moved the domain file. When I open iWeb, all the pages are there. I made one small change, and only want to update the one page, but since it's on a new computer, all the pages are red and I can't publish just one page - every time I try, iWeb tries to publish all the pages, and it errors out every time. Can anyone tell me how to make it publish just one page at time in spite of the fact that all the pages in the sidebar are red? The only reason I can think for the error message is that there's too much content to do it all at once.

Yes. If you are uploading to a server and not MobileMe, then just select the option publish to a local folder.
When you have done this, then use Cyberduck or Transmit and upload just the one page from your site folder to your server, plus it's resultant file. So if you just want to upload a Welcome page for example, use Cyberduck to upload just the Welcome.html page and the Welcome files to your server and into your root folder on your server, which would be either a public_html folder, a www or htdocs folder.

I can't figure this one out...

I've imported a .swf file into one of my table cells. The
cell is 700x200. The .swf file is 700x200.
http://www.associatespd.com/CHSA_Web
I've recut and resaved my .psd file TWICE. I can't figure
this one out.
It seems that the flash file is stretching or something, its
off one pixel on the right. When i set my flash file at 699 width,
it was one pixel off on the right.
Can any offer any suggestions. I'm completely out of ideas.
Thanks in advance.

Ally86 wrote:
> Okay, so I have great vision. But what's the fix? The
suspense is killing me!
>
> My logic is saying that since your graphics is off in a
precise pattern, and
> only in your Flash object, that it was moved somewhere
in the flash file
> itself. So it would make sense that it would line up if
you replaced it with
> the original image (if the problem is in the flash, not
the table).
>
> In my mind, I imagine your flash includes half of the
text graphics, cut off
> at that horizontal split - since your movie loads in
only part of the screen.
> Maybe I'm beating a dead horse, but double check the
layer (in your .swf file)
> that your lettering is in for that eagle-eye split.
>
> If it's there, just move the second half over. If it
can't be seen in the
> flash, I promise I'll shut up. Just humor me, pretty
please . . . (I have a
> sneaking suspicion you're willing to try anything)
>
it looks like the graphic's width might have been transformed
at 101% in Flash.
If the actual image file has the right width, I don't see any
other possible explanation.
You should double check in Flash authoring, select your
graphic (or your MC or whatever object you
might have converted it to) and open the transform and/or
info panel. One of these panels will show
you the % width and height ratio of your object...
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

How can I Make just one color pop and the rest a black and white photo??

How can I make just one color pop and the rest of the photo black and white?? I'm using iphoto...

3rd party image editors like Photoshop Elements for Mac can do it:
Click to play video screenshot
Or use it to keep an object in color and the rest B/W.
Click to view full size
OT

Can i email just one page from my spreadsheet?

Can I email just one page (tab) from my spreadsheet?

Only if you copy and past it into the email (and of course it would no longer be a spreadsheet, just text). You can only send files as an attachment not portions of files. you could copy the contents oif the tab into a new file and save it.

Is it possible to Lock just one column value in a row?

Is it possible to Lock just one column value in a row
A Java Developer has just asked me if it is possible to Lock just one column value in a row in Oracle
select ename from emp where empno=7369 for update;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-80 800 20
will lock the entire row with empno=7369.
But is it possible to lock one column value from this row, like SAL=800 ?
Edited by: J.Kiechle on Jan 8, 2009 10:45 PM

J.Kiechle wrote:
Is it possible to Lock just one column value in a rowNo. Locking granularity is a row.

HT4689 How do I get out of full screen view in mission control?

How do I get out of full screen view in Mission control so IO can close the app?

Press the escape key, but, when you move the cursor to the top of the screen, doesn’t the menu bar reappear? It is supposed to.

How can I transfer JUST ONE IWeb site to another computer?

I am new to making IWeb sites and am now making them for
other people. I have about 10 sites in my IWeb folder and need to
be able to give a person's site to them.
I need to be able to transfer JUST ONE site to another computer.
Right now, I am only able to transfer ALL the sites I have made to
another mac and then, it wipes out all their sites! How can I prevent
the ultimate wipe out of all their iweb sites yet give them JUST ONE
of mine?
thank you in advance,
Beth http://www.yourzensite.com

First, read Wyodor's post about changing the publishing settings HERE.
You can create the extra folders in Home Folder/Library/Application Support/iWeb or, as I do, in a folder named iWeb in the Home folder.
Create a folder for each website, give it a suitable name and paste the Domain.sites2 file with all the websites into each.
Open each one in turn, double click the Domain.sites2 file to launch it in iWeb, delete all the sites except the one whose name is the same as the folder name, save and quit.
Now you can launch any site individually in iWeb and sent a copy of the appropriate folder to the client.

Can't hear just one person through my iPhone 4

Okay, so lets see if this works. So I've had my iphone 4 for about a year and a half, I've never really had issues beside the normal glitching and having calls drop here and there. Recently I've had an issue with my iphone connecting with just one individual. Yes, I know it sounds weird but keep reading. I have been able to make calls and recieve phone calls fine, however I cannot with just one single individual. They to also only have the same problem with me, however the only difference is they can hear me but I cant hear them or anything. We're able to text and send picture messages without any issues.
Now sometimes when I try to call them, itll ring twice and then the line just goes dead, but thats usually them picking it up. I cannnot hear them at all. I've already done the reset on my phone and I've already contacted apple about this issue and their about as lost as I am because it doesnt make sense that this is only happening with one individual. I've also blew out the speakers and such like people have suggested. I use my head phones that came with my speaker, and ive connected and reconnected them incase my iphone thought they were plugged in.
Let me give you a little bit more info. They have an android phone, we have the same carrier which is verizon and they live in another state (not sure if thats helpful). I'm completely lost because this has been going on for about 4 days now and its driving me crazy. This happened a few weeks ago, however it magically fixed its self ( im thinking it was because I had bad service). If anyone has any solutions that might help, please, please let me know.

The whole issue is that I cannot hear this person, but I can hear everyone else.
That proves that the problem is either in the other party's phone or his carrier. If you can hear everyone else, your phone is OK.

I can't delete just one symbol in Pages

When I place a marker on the right of a symbol I want to delete and then press Delete an entire word is being deleted. Also when I want to mark just one or several symbols an entire word is being marked as well. I'm using the template "Storyboards". I feel it's going to occupy a big portion of my time trying to figure out on my own how to make this to act as I want it to, so I'd be grateful if you told how to delete characters one by one.
Pages 9.1
Thanks,
I.S.

It might be worth checking the User Guide section on Placeholder Text which begins:
Using Placeholder Text
Templates contain placeholder text, which shows you what text will look like and where it will be placed in the finished document. Most placeholder text appears in Latin (for example, lorem ipsum) in the document body, text boxes, headers, and elsewhere. Other predefined text, such as the title of a newsletter, appears in the language you’re using.
You click to select the placeholder text and then type your own text to replace it. The text you type keeps the same style and formatting as the placeholder text. If you don’t want to use the style and size of fonts the placeholder text uses, you can change the selected text by clicking the font family and font size controls in the format bar.
Here are ways to work with placeholder text:

How can I delete just one little picture from my new ipad2 ?

This is my 1st Apple product an Ipad2. How in the world do you delete just one picture at a time??
Thank you in advance.

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/wesites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view. Photos that were synced from your computer are deleted by removing them from where they were synced from and then re-syncing.

How can I get just one menu?

Hi,
I hope there is a way to have just one menu, the main menu, and to have two buttons on it: one for one chapter, one for the other, not one for playing the whole movie, one for playing individual chapters. Is there a way to do that? Is there a (simple, straightforward, no frills, non-garish, NO MOTION) theme that has that setup or that can be adapter for that use?
(I currently use Brush Strokes and I have to kill the motion every **-***** time, yet varying amounts of motion ALWAYS appear until I slide the motion duration slider all the way to the right (max) and then back all the way to the left (min/0). (Yes, I have saved a version of that theme with no **** motion but it still appears despite that.) I DO NOT WANT ANY MOTION or sound effects if I am going to use any other theme than Brush Strokes. I can kill the motion and sound but I don't want one that has a garish look or has lots of motion initially.)
Is there a way to use the map to eliminate the second-level menu or makeit the main menu? And if there is, would I be able to add/change the main menu buttons to that they start each chapter, not play the whole movie or play individual chapters?
Thanks so much.
John L

Hi
Not so interested in bad language. Struggling to get my own understandable.
To do what I guess You want, only way I can think of is:
- Make each chapter as a stand alone movie
∆ This by: selecting clips in iMovie that belongs to Chapter one
- Export as Full quality QT.mov BUT - remember to mark - selected clips only
- Now select the rest (or Chapter two) and export this
Now You just drop Your Chapter one and two into a new open iDVD theme
window.
To make iDVD to handle both a full movie and specific Chapters alone has
not been implemented in an easy way - but has to be a double material
project. Which is not so economical. Only alternative in my mind is
DVD-Studio Pro - and this hurts even more "economicaly"
Yours Bengt W

Can I move just one part of a letter???

Hi,
Is it possible to move a piece of a letter from some text? I love the look of a particular font I am using, but I would like to move just one part of one letter up a little (just this once in this particular design).
How can I do this? (See that bit of the n? I want to move it up.)
THANKS!
Magda

Magda,
You cannot simply change the letter while it is live Type; that requires your editing the font, which is possible with other applications.
For individual instances, you may Type>Create Outlines, Direct Select the part, and move it.

Can I "lock" just one out of my four displays in mission control.

Similar Messages

Maybe you are looking for