Can I lock the volume curve to the track so it moves with the track?
I can't seem to move the volume curve when I move the section or track. Is it possible to lock the volume curve to the track or section? Otherwise I have to recreate the curve for that section or track which seems so completely inefficient that I can't imagine that is how it is supposed to be done.
Thank you!
here, this should help:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqmovingcurves
Similar Messages
-
I can't get the volume to work on my ipod. works only with the headset in. Thanks
Hello I can't get the volume to work on my ipod touch. Only works witht the headset. Thanks
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?
Go to your home screen, and then press the volume down or up button. It should say Ringer instead of volume. If it doesn't do that, try going into the clock app and try it there.
-
how i can increase the volume when i playing a video? dont showing the volume control in the video player..
Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.
-
Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
Can't get Netflix to recognize an iTunes purchase keeps coming us with "the credit card information that you entered does not appear to be valid'? Netflix says not them?
The message you received indicates that the phone is locked to a carrier other than the one for which you have a SIM. You'll need to take the issue up with Apple. Nothing you do with iTunes is going to make a difference.
I'm quite surprised that the UK Apple Store replaced a U.S. purchased phone. They usually won't.
Best of luck. -
Menu Bar - Sound Volume icon does not move with the press of the F key
So I normally press the F keys to control the Sound Volume, right, just like everyone else does -
but the Sound Volume icon in the Menu Bar at the top right does not respond to the F key at all!
Isn't it supposed to react simultaneous with the press of the F key?
I have to actually use my mouse click to make that volume go up and down.
The actual volume does work with the F key, it goes up and down.
But to make the 2 work in sync, I have to point the mouse to the one at the Menu Bar, fiddle with it, and then I can use the F key and both work together at the same time.
If I haven't touched the Menu Bar one for a while and I only use the F key, the Menu Bar one doesn't move at all.
It's weird. Any ideas?I see what Al is seeing. Normally I just use one method or the other. The Volume Adjustment keys provide visual feedback, so it's unnecessary to check the menu extra, i.e. the Volume menu bar icon, to see the same feedback.
The slight delay in the reaction of the Volume menu extra, when open and while adjusting the volume with the Volume keys is normal.
They're independent methods for adjusting the Volume setting. The Volume menu extra takes a moment to refresh when the slider is displayed and you're changing the setting via the Volume keys.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
Can I upgrade to OS X Lion, and then reformat my computer with the OS X CD?
Can I upgrade to OS X Lion, and then reformat my computer with the OS X CD? Because if I reformating my mac with the regualr OS X CD, would that erase the Lion? Since I just donwloading the Lion, and don't really have a CD for it.
If you install Lion then erase the drive that will erase Lion. To purchase and download Lion you must first install Snow Leopard 10.6.6 or later to access the App Store where you purchase and download the Lion installer. You might read this before:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion. -
WHAT THE HECK! eversince I updated my itunes... My laptop keeps on crashing, i try to change the volume on itunes and it doesnt even move, and I quit Itunes but apparently it won't ever quit... I lost all my paper work cuz it crashed 4 times this week.
Try disabling the computer's antivirus and firewall for the network problem.
Also for the original problem try the following if Ana's suggestions does not work
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked.
Any advice?
Thanks.
Alex.Cannot figure out what your talking about since it makes no sense.
If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
You must log in with your cell number and your my Verizon portal password. Not the account pin.
Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
If you don't have the information then there is nothing they can do.
If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
Good Luck -
I have a new iphone6+ and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.
Sorry if this is too basic or confusing
Apparently in iOS 8 there are different volume settings for different applications
The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
Please let us know what happens
Thanks -
Can 2 people plug earphones into one iPad to watch a movie at the same time?
can 2 people plug earphones into one iPad to watch a movie at the same time?
If you purchase a splitter per the suggestions from the others, be sure that the earphones have their own volume control. Some, including the absolutely excellent Bose Quiet Comfort "15," rely on the iPad for volume control.
Also be prepared for the possibility that neither listener will be able to get the sound as loud as he/she wishes. -
My Ipod nana automatically reduces the volume and does not hold my attempts to increase the sound. Help.
There is a Volume Limit setting on the iPod. From the main screen
Settings -> Playback -> Volume Limit
You can check that setting to see if it set too low. -
When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.
That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
Thank you for your replys
Maybe you are looking for
-
How to submit a batch compare job using a unix script and cron?
I understand I can setup a unix script to be used to schedule a database compare job. I'm not sure how to get past the popup log in window tho... When I use the command line and include the -id<myid> the OMS login window pops up requesting login pass
-
Hyperlink to web page with an iframe in PHP
I want to be able to have a hyperlink to a web page, the page has a iframe on. When you click the link to the actual page, I want to contol what is called into the frame in php? Any ideas??
-
My iPhone 3gs doesn't send message anymore
Hi everyone, I've got a iPhone 3gs wich is unable to send message anymore, even in iMessage mode ! I open the app, I can type my message as it used to do ... the phone number is correct, but when I send it, it's marked in red there's a delivery error
-
Hi, i have a phone thats no working fine, it unregister all the time from the sip server. The port connected to the phone has output queues dropped on queue 1. ¿That's normal? ¿What could be the cause that there drop packet? Thanks! I have this conf
-
My idisk continues to syn and won't stop. I have the setting on manually but it syncs automatically,anyway. Curiously , the sync wheel is always spinning in the Finder sidebar but not in the toolbar. At the bottom of the idisk window it continuously