Can I log specific users' bandwidth over an extended period of time?

I have an AirPort Express and I live in an apartment building. I am sharing my wireless connection with some other tenets in the building, via allowing their MAC address, and I need to view their bandwidth in order to determine an the appropriate amount of the monthly bill they should pay. I have the AirPort Client Monitor and the AirPort Management Utility but I can only figure out how to monitor live usage.
Is there any way I can log specific user bandwidth over an month to see their total usage of the network?
12" Powerbook G4 Mac OS X (10.4.7)

Is there any way I can log specific user bandwidth over an month to see their total usage of the network?
No, this is not possible with the AirPort Extreme base station (AEBS).

Similar Messages

How can I restrain the user login portal once, in the same time ???

Hi
I need to restrain the user can't repeat to login portal ....
to reduce portal loading
How can I restrain the user login portal once, in the same time???
Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
tks

Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
- Jim

I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?

I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

Display Data on waveform chart or XY graph over a long period of time

Display Data on waveform chart or XY graph over a long period of time
Can anyone help?
I am acquiring data from an Ni DAQ card with the following parameters - sample rate = 12800, number of samples = 4096. I want to extract order information so as to track changes in the amplitudes of certain frequency harmonics. So I use the sound and vibration toolkit to extract this information as shown in the attached Vi. I will like to plot the resulting amplitudes against real-time starting at the time the Vi was run. I really want the display to show these changes over long periods (eg. days, months and even years).
Problem.
I have tried to plot the Y component of the resulting magnitude for a given order on a waveform chart. My choice of the waveform chart is because I also want to display alarm limits (using the mask and limit vi) (I can't have these lines displayed on an XY graph plot). I tried adjusting the scale offset using the property node and setting the offset to current time. However, the display on the X-axis can only show a span of 2 minutes as will be seen when you run the attached vi. I want the time display on the x-axis to be over a period of days, months and even years. Is there a way to set the maximum scale on the x-axis to be say a year or so in future.
I really want the display to be like the one in in the second attachment.
Attached is a sample VI created using an Ni USB 9234 DAQ card. Any card will do but I am only getting the signal from one channel for this example
I will appreciate any help that can be given to me.
Thanks
Attachments:
Real-Time Graph Display.vi ‏170 KB
Sampe screen1.doc ‏37 KB

Long term testing can be tricky- and we'l get into that later. Lets start with the basics that you have wrong.
The vi as you have constructed it has only one memory element, the chart history length (default is 1024.)
You can change the number of points the Chart will remember by Right-clicking the chart an select Chart History Length from the menu.
But for a long term test - and one where you want to REMEMBER the first value you need a memeory element that is independant of the application. Your PC WILL loose power or need to be rebooted eventually. Heck it might even need to be replaced! you really need to store your data in a file. Preferablly in a file that is backed-up on a regular basis so you don't lose every point of data if the PC dies. It realy hurts when you have to restart a 2yr test because you've lost the 18months of data you collected.
For an application like this I would seperate my "collection" and "Evaluation" operations.
Have one vi that takes the reading and writes it to a file at a configurable rate You may want 1reading per minute for seveal days then 1 per hour for a few weeks- then maybe only once or twice a week for the next couple of years since you are looking for LONG TERM stability. having too much data to evaluate can take a lot of digging to find the few things that interest you (but always take more that you think you need)
Have another utility that COPIES the files, reads them and displays the data you are interested in that day. The data you want to look at won't change over time HOWEVER, you WILL want to analize it in different ways depending on what the data trends look like. Having seperate routines for collection and display allows you to update the display style and analisys without even stopping the collection vi (much less editing the vi)
Jeff

Information on the reports that have run over a certain period of time

Hi everybody,
do you know any report (programme, table or other object) that provides with the information on what reports have been called by the users over a certain period of time in the past? I am especially interested in the reports in the customer name space (z-reports). Once there was a programme called RBE (Reverse Business Engineer) that could give this information, but it doesn't function in ECC 5.0 & ECC 6.0 anymore and no longer supported by SAP.
I would be grateful for any information. Thank you! Nat

Transaction ST03N will give you all the information you seek and then some!

Is there anyway i can put a stop to emails between a set period of time say 10pm - 6am without turning off internet connection

Is there anyway i can put a stop to emails between a set period of time say 10pm - 6am without turning off internet connection.

The only ways in iOS would be to stop using push mail or timed fetch mail and switch the account(s) to manual fetch. That way, you only get mail when you open the mail app. to use it.
Or, you could selectively disable wifi and cellular data - voice calls and SMS texts would still come through then.
Other than that, I cannot think of a way to selectively disable email by itself.

Can't Log Any Users Onto My Domain Except the Administrator Getting The Following Error "The user profile service failed the logon"

Hi All,
I am currently completing a project for college which involves the creation of a domain, OU's, GPO's etc within a virtual environment.
I am using Windows Server 2008 Enterprise running this on VMware however after having completed and tested all my GPO's now none of my users are able to log on to the domain and keep getting the following error message "The user profile service failed
the logon" "User profile cannot be loaded".
I have tried to a lot of different options prior to posting which include:
Creating a new user account/s in case the previous user policies were corrupt the same error message is shown.
I also configured my DC to allow users to log onto the DC in case this was a network issue but the same error still exists.
My Administrator account always logs onto the DC without fail and applies all the GPO's as it should.
I have rebuilt my servers twice now at this stage and the same problems keep happening at first it was just confined to users within a single OU but now is Domain wide any suggestions on what I can do.
Thanks,
John

John,
Since this is a project, you may have experimented with various settings in multiple Group Policies, so I would recommend you run the Group Policy Modelling Wizard, as it will show you all the GP settings down to a specific user on a specific computer, plus
tell you which Group Policy sets and which settings, and thereby perhaps find where the problem occurs.
Please mark as answer or vote
as helpful when
it applies. Thanks!

Can't log new user onto Mac Mini Server

I can't log a new user into Mac Mini server. Have added the user to the Workgroup Manager, and am now trying to use the password created there for log-in on user computer. Any advice?

Do you have Server Access Control Lists (SACLs) configured? If so, you will need to add this new user to the appropriate SACLs before it can connect. As an example, when I create new users, I need to add them to the File Sharing SACL or they never see any available shares on the server.

Can not log on user@domain

I can not log on the JES identity server 6.1 with user@domain.
How do i setting the identity server to support user@domain ?
Thanks

Configure LDAP attribute name which contains this value in the list of aliases for core and authentication modules.

Can't log into user accounts

Before the Christmas break, our Mac OS X Server was happy and running smoothly. Upon return, the individual clients cannot log on and the XRAIDs are acting strange (lights won't turn off on power down). I've since completely powered down and unplugged the 2 (of 4) RAID arrays that were acting up and they have all rebooted normally now--although I still se nothing in RAID Admin. On the client computers, however, we still can't log into our individual accounts--only the Admin account.
What gives?

Hi
Check the physical structure of your network, switches are switched on, cables connected etc. If you can’t communicate with the XServe RAID using RAID Admin is it possible someone has removed the network cables?
Hope this helps, Tony

Unable to access shared files over network after period of time.

First off, I don't think that this issue is related to our router, but I have been searching for a fix and can not find one. We have a WRT54GS. Now, on to our issue:
At my work, we have a small network with computers sharing files between the others. I have attached a network diagram to help explain this better.
Our Win7 machine is our main computer that shares an external hard drive with much information that the other computers need to access. What we have noticed is either after a sleep, or even a period of time of say, 2 hours, those files are no longer able to be accessed. The Win7 machine is still sharing them, but the WinXP machines are unable to access them anymore and my Mac can see the computer is unable to connect to the folders. I have gone and attempted to get some help over at Microsofts site but that was a fail. Here is the link to the forum post there. http://social.answers.microsoft.com/Forums/en-US/w7network/thread/f0a2e8d6-f75a-41d7-a280-c6f3adbffa...
A member there gave me this:
The Network connection is probably not resuming after sleep.
First try this, http://www.ezlan.net/Win7/power_save_win7.jpg
It is in the Network Connection Properties under the Network card configuration.
If it already checked this way, or does not work after checking, the Network card has to be taken out of the computer's Power Saving loop, and stay on all the time.
Otherwise, Updating the Card with the latest OEM drivers (downloaded from the computer's support site) might help too.
On a rare occasions, some cards might be "Quirky" in this regards and need to be replaced.
--I would like to add that this DOESN'T ONLY happen after sleep, it also happens after a time of being used.
I attempted those and no luck. This problem is still occurring and the only way we can fix it is by restarting the Win7 machine. But even if it is being used, we have no idea when those files are unable to be accessed.
*I will add that the Win7 machine is still able to access the other computers when this problem occurs if that helps.
**The Win7 machine is a Dell T3500 running Windows 7 64bit. I can provide specific hardware if needed. The drivers are all up to date as of yesterday.
***So upon looking in the Windows XP machine, both of the folders from the Win7 machine disappear once this problem occurs in the My Network Places folder. And one folder is on the internal drive, one is on external. The computers are in this situation now where I am unable to access them. The Win7 machine can read and write from the other computers, but the other computers can even see the Win7 Machine.
****All the connections are wired and are not using the wireless.
Thanks for any help that anyone may have for me!
Steve
Network Map > http://scubasblog.com/network.jpg
Dell Support Forum with same issue I posted >> http://en.community.dell.com/support-forums/network-internet-wireless/f/3324/p/19337620/19716797.asp...

It sounds like there is incompatibility issue with XP and Win7. To isolate this, do you have another Win7 machine? Try to add it to the network and check if the shared drives are accessible after sleep. If you don't have another computer, try virtual machine and create a Win7 system.
Update your LAN card driver from the manufacturer's site. Don't use the driver from windows update.
Lastly, does this happen to your XP machines? Like, one of the XP machine sharing a folder and falls asleep. When it wakes up, does Win7 machine can still access the shared folder?

How to find out Tcode Used and their hit rate over a given period of time.

Hi All,
We wanted to know what are the tcodes that are used and how many times over a period of time..
Can you please suggest the ways to find this out..
I have heard of ST03N but not sure how to use this and then download the information ..
Regards,
Vidya..

Hi,
Check this
[How to get list of frequently used TCodes]

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Hi
Yes you can delete the expired certificate which are showing as it is not functional anymore and they remain as stale entries
You can use below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Can't log into User Account after disrupting external hard drive

I keep my account (Admin) on an external hard drive due to the large volume of data. I mistakenly pulled out the USB cable to the drive while trying to resolve another issue. Subsequently, it appeared a lot of my data was missing. I restarted the computer and couldn't log into my user account. It seems pulling the USB cable to the external drive corrupted something. I verified both disks (internal & external) and all was OK. I ran Disk Permissions and tried to repair. The resultant information is attached at the bottom of this message.
I can access my data on the hard drive from my laptop over the network. I just can't get into my user account directly. Any ideas on how I can address this issue?
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
Permissions differ on "Library/Frameworks/HPPml.framework", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Frameworks/HPServicesInterface.framework", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Printers/hp/Frameworks/Matterhorn.framework/Versions/DI_MH.A.05.01.001 /Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .
Permissions differ on "Library/Printers/hp/Frameworks/ResourceManager.framework/Versions/DI_RM.A.04.0 7.000/Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .

There may have been another solution to this problem but I went the route of creating another user name and migrated the data over to that name. Thank you!

Can't log off user name

I never had any trouble. I'm on a G5, OSX, I have two user names, each with separate passwords. I try to log out of user name under apple pull-down and NOTHING...also I tried shift apple Q and NOTHING. Any suggestions? Thanks so much!
alix

Save your open documents in other applications, and then use the Activity Monitor in the /Applications/Utilities/ folder to force quit the loginwindow process.
(23343)

Can I log specific users' bandwidth over an extended period of time?

Similar Messages

Maybe you are looking for