Can I maintain original aspect Ratio when making web Quicktime video

Hello there,
I have to convert at 16:9 Premiere file I originally made for DVD into a web ready format. Can I do this without distorting the image? In other words, I want to reduce the file size and keep the proportion intact.
Also, for future reference, what is the optimum aspect ratio when creating video content for web with Premiere?
Thank you in advance for your help.
M

Thank you Jim. Sorry for not replying sooner; I've been offline for a couple of days. Your reply is helpful and I'm
happy I won't have to squash my original 16:9 format movie to put it online.
Martha

Similar Messages

Can I maintain wider aspect ratios when I import mp4 video to a slide?

When I import mp4 video to a slide the aspect ratio changes. It seems to go from 16:9 to 4:3. Everything looks squished.

MP4 video always seems to have some quirk when using it with Presenter/Connect. Try converting the video to FLV and then importing it to Presenter.

How to keep original aspect ratio when cropping in Camera Raw?

How to keep original aspect ratio when cropping in Camera Raw? Cant figure it out! With shift, the aspect ratio is 1:1. But I didnt set it to 1:1 (I checked "normal").

The Shift key works once you’ve set your crop ratio. DSLRs would typically do 2:3 and others sometimes do 3:4.

FCP project not the correct aspect ratio when exporting to Quicktime

Hello All;
I am trying to export a FCP project in its native resolution (1440 X 1080) to Quicktime but everytime I try, the aspect ratio is messed up and people look taller and thinner than they should.
The project is a resolution of 1440 X 1080 as determined by examining the sequence settings in FCP.
I configure quicktime (see below) to a resolution of 1440 X 1080.
So why isn't my Quicktime video the correct resolution when I play it with the IMac's Quicktime player ? I shrink the player to 1/2 size to fit it all on the screen.
My exact settings are below ...
Export - Using Quicktime Conversion
Format - Quicktime Movie
Video Settings - Compressor - MPEG-4
Quality - Best
Not sure if I changed the framerate - if I did, I probably changed it to 29.97
I didn't touch the other settings in the video settings - left them to default
I didn't change the filter settings - I left them at default
Size - 1440 X 1080 (The actual resolution of my source video)
I checked the box - preserve aspect ratio using letterbox (If applicable)
Other settings were left at default
Sound Settings - Format - AAC
Rate - 48 KHZ
Render Settings - Quality - Best
Target Bitrate - 128 KHZ (This was left at default - I did not change it)
Prepare for Internet Streaming - Fast Start checked (This was default - I did not change it)
All other settings not specifically mentioned were left at default.
Thanks. Tim

I don't have much of an answer for you, but to test try not checking the preserve aspect ratio. Rather than reexport the entire 1 hour just export 10 seconds so that you can trouble shoot different things.
Hope that helps a bit,
Eric

Incorrect aspect ratio when importing MPEG-4 Video file to project

My movie which originated from a commercial DVD, is a .m4v.ff.mov file.
The "ff" is the software interface (ffmpegX) that converts third party Unix media.
When I open it as a Quicktime movie it comes up in the correct 1: 2.35 aspect ratio.
and shows an actual pixel dimension of 720 x 304.
When I import that same file to FCP (version 5.1.4) it comes up as 720 x 480 pixels - a completely different aspect ratio. The viewer window shows the pixels to be a SQUARE format but it is grayed out.
I was able to de-select the "show as sq. pixels" in the canvas window but it only expands it to what appears to be a 1: 1.85 aspect ratio and not the 1: 2.35 which it should be.
Any ideas on how to fix this?
i would greatly appreciate someone with the expertise to solve this.
Thanks,
Richard

I think I figured it out for myself:
In the Viewer window go to the "Motion' tab, go down to Aspect ratio and move the slider to the left or right to adjust the width to height relationship.
I have no idea why this is solving the issue but it does.

Maintaining aspect ratio when transforming

Since I have upgraded to CS6 I've noticed that when transforming an object it does not maintain the aspect ratio even when I am holding shift while transforming. I have to each time check the link button (maintain aspect ratio)

It'll be because 'Snap Vector Tools and Transforms to Pixel Grid' is enabled in 'Preferences > General', an option that didn't exist before CS6. It's actually being more truthful that way because the transformed layer has to become an integer number of pixels wide and tall, anyway, and that's not going to be a perfectly proportional scale in most cases.
See what I mean by trying to scale an 11 x 10 pixels layer by 50%. It's impossible for that to be scaled by exactly 50% in width because the result has to be either 5 or 6 pixels wide (it will be 6). When the 'Snap...' preference is disabled (i.e. the pre-CS6 behaviour) you can scale the bounding box by precisely 50% in width but the pixels don't cover precisely 50% of the original width. When the preference is enabled, you won't be misled by being able to scale the bounding box to precisely 50% when the pixels cannot cover precisely 50%.

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

Exporting problems, won't stay in original aspect ratio..... (black bars!)

So I'm trying to export footage off of my 5DMK2, I've worked in Final Cut Express, added in transitions and some audio edits, fine, works great.
But when I export it adds black bars to the top and bottom, I fully understand why they exist on videos that are not actually 16x9, but my video IS, the files that were imported were true 16x9 ratio, and now in the export it has black bars.
I just want the video to have no black bars at all and keep the original aspect ratio of 16x9.
I've tried almost everything I can think of. Exporting it in various different ways. It makes no sense to have 16x9 videos to have black bars on them to fit into 16x9 windows..... I have no idea why it's doing this.
Message was edited by: AncientNation

There you go, that's the problem. You placed 1920x1080 footage in a DV-NTSC sequence, and it scaled it down to fit, thus adding the black bars.
Here's what you do now:
1. Create a new sequence ( +File > New Sequence+ )
2. Select that new sequence in the browser, and go to +Sequence > Settings > Load Sequence Preset > Apple Intermediate Codec 1920x1080i60+
3. Copy your edited footage in your original sequence
4. Paste it into your new sequence that you created
5. Select all of the clips in the new sequence
6. Go to +Edit > Remove Attributes+
7. Check the +Basic Motion+ and Distort boxes
8. Click OK.
That should make it look better. If you did any keyframing or adjusting within the motion tab of the viewer you will have to redo that work, but at least this gets your original problem fixed. You can then export as you'd like, for DVD export to Quicktime Movie.
In the future, if using 1920x1080 footage you should change the sequence to match it before putting the clips in the sequence. You can make the sequences default to this setting by going to +File > Easy Setup+ and selecting the +AVCHD Apple Intermediate Codec 1920x1080i60+ option.
Message was edited by: skalicki`

Set maximum aspect ratio when exporting

Hello,
I'm using LR5 and I'm wondering if it's possible (maybe with plugins if necessary) to set a maximum aspect ratio when experting photos. For example I have a picture that I cropped to be a panorama, with an aspect ratio of 26:11. The print shop can print at a maximum aspect ratio of 19:11. So my 26:11 image is too small and I need to add some bars at the top and bottom of my photo to reach an aspect ratio of 19:11 (see also the sketch below). Later, when I get the finished prints, I have to cut the bars at the top and bottom with a pair of scissors for example. Is it possible to let LR automatically add these borders for a given maximum apsect ratio?

Hi Victoria, thank you for your reply. I looked at the Mogrify plugin, but couldn't find the option I need. I see some options for canvas and resizing and adding bars, but these all require to set a certain absolute pixel dimension. I don't want to resize images to a specific pixel size, I just want to correct the aspect ratio by adding bars at the bottom and top of the photo. Maybe I'm missing something in the Mogrify plugin? Could you explain how I can add the borders automatically to reach a maximum aspect ratio of 19:11 using Mogrify? Just to be clear, all photos with an aspect ration between 11:11 and 19:11 don't have to be changed. Only photos with an aspect ratio larger than 19:11 should be changed to 19:11 by adding the bars.

After pasting a crop, how can I keep that aspect ratio?

I am using LR3.2. I often use "Previous" to paste settings onto a picture, including a crop with an aspect such as 5x7. When I then go into the crop tool and grab one of the corners to resize the crop, it snaps back to the "Original" aspect ratio. Is there a way to tell it to keep the same crop ratio I just pasted, without having to reselect that aspect each time?

It's a bug.
http://forums.adobe.com/message/2965889#2965889

Can I change the aspect ratio of existing projects?

Over the past few years, I created a number of iDVD projects of special occasions. I guess the default aspect ration in the older versions of iDVD was 4:3. I now have a widescreen TV and would like to view these videos in 16:9 mode. The TV can change aspect ratios but it distorts the video. Is there a relatively easy was to redo IDVD projects to change the aspect ratio to widescreen?

The TV can change aspect ratios but it distorts the video. Is there a relatively easy was to redo IDVD projects to change the aspect ratio to widescreen?
Depends on your goals here. You can duplicate what your widescreen TV and do fairly easily but you would still end up with screen distortion if you use the entire 4:3 display area. It is is also reasonably easy to crop your 4:3 aspect to a 16:9 area within the 4:3 viewing area and burn this to a DVD. While this would prevent distortion, part of your viewing area would be lost and the result would be the same as using the the "Zoom" display on your widescreen TV. A third option might be to select a 16:9 viewing area within the original 4:3 display area. Unfortunately, this would would normally require an advanced editing application or cropping and scaling either as a whole or in selected segments. In either case it requires a much greater effort on the part of the user.
In short, actually changing an aspect ratio from is original aspect is either easy but causes distortion or it is difficult and time consuming. Further, in either case you are merely duplicating what your TV can already do. If you don't want distortion, use 16:9 "sourced" (either original or cropped) content. If you want to reduce the distortion (and your particular TV has the option), use the "Justify" viewing option which applies little or no distortion at the center of the viewing area and most distorion towards the left-right edges of the screen. Otherwise learn to live with the distortion and decide whether you prefer the distortion being applied to the DVD or just on the viewing screen.

Option to keep aspect ratio when scaling pictures

If I place a picture object on the report and change the size or scaling I woul like to have an option to keep the original aspect ratio. I've seen other products that have this feature. I use the ole object with a graphic location value (from DB field) so different pictures may appear based on data. Unfortunately the original pictures are not all the same size so pictures end up skewed when trying to fit.

I meant for this to be in feature request thread. Not sure how to move it there or atleast delete it.

How can I change the aspect ratio

I connected my new Apple TV 2 to an LCD projector (Epson 9300) using a Belkin HDMI-to-DVI cable. The projector supports a variety of resolutions, but the aspect ratio is fixed at 4:3. The picture is therefore stretched vertically. How can I change the aspect ratio on the Apple TV?

How can I change the aspect ratio on the Apple TV?
You can't. The TV device plays content at the encoded aspect ratio. It is up to your viewing device to alter the display aspect if it can. Your primary options are to use a different viewing device capable of multiple aspect ratios, scaling, and/or zoom effects or you could simply letterbox your content when you encode it.

Edit a video at original aspect ratio?

I'm curious if there is a way to edit a video in premiere, without having to edit the original aspect ratio of the video - that is, I do not want to have to stretch the video, degrading the quality, nor do I want a bunch of black area added to it, which premiere adds to video that are under the program ratio.
I have some video where the shooter made a mistake and saved at the wrong settings (I would estimate 360 or 480 rather than 1080). The videos look okay at their current size (they are widescreen BTW....or some odd mix between wide and standard). I would rather they play smaller, than be blown up and pixelled to death. But I need to edit the video (cuts, trims, colour correction, etc).
I am using CS4.
Thank you.

You can make your own presets in new sequence/general tab under editing mode choose Desktop.
This will give you the option to set all parameters as you want them to be.

How can I change the aspect ratio of an image display

I am snapping a sequence of images and using imgPlot to diplay the images. However, due to my camera specifications [it's a Pulnix 9701 with Pixel Size 11.6μm (H) X 13.3μm (V)], the image I get displayed is elongated in the horizontal direction, i.e. if I snap an image of a square, I get a rectangle on my computer display.
How can I change the aspect ratio of the display on my computer? The only parameters I have seen so far just control what portion of the image is acquired or diplayed, but none actually changes the aspect ratio.
Thanks in advance for any help.

If you are using an analog camera, you can set the aspect ratio in MAX. This will correct for non-square pixels.
If you are using a digital camera, I don't think there is a way to fix it during acquisition. You could resample the image to correct the ratios, but that would be a slow, time consuming process.
One other possibility is that your computer monitor is in a mode which is not a standard 4x3 configuration. For example 640x480 and 800x600 are 4:3 ratios. 1200x1024 is not, which tends to distort your displayed images.
Bruce
Bruce Ammons
Ammons Engineering

Can I maintain original aspect Ratio when making web Quicktime video

Similar Messages

Maybe you are looking for