Can I make 10 Adobe ID's?

I work in a small office and we can't afford to pay $70/month for 10 users when 7 of them only use Photoshop occaisionally.
My solution is 10 IDs: 3 Complete subscriptions and 7 Single App subscriptions. I don't want to lose my money, will Adobe ban me for this?
Thanks, Paul

Your solution will work. Adobe will not ban you.
The disadvantage is that you will have the company credit card used against 10 Individual accounts versus 1 Team account with 10 Seats.

Similar Messages

  • How can I make Adobe Reader 9 open for incoming PDFs instead of Acrobat 5.0?

    How can I make Adobe Reader 9 open for incoming PDFs instead of Acrobat 5.0?

    Hi,
    Assuming that you have Reader 9.3.4 already installed on your machine, you can try the following to make Reader 9.3.4 as the default PDF opening application:
    1. Right click on any PDF on your system and click on the "Open With" Option in the context menu that appears. In case you get another submenu, click on Chose Program in that menu. (In case you do not see any "Open With" option, then hold down the Shift key and right click on the file)
    2. Click on Browse button in the dialog that appears, and select Reader 9. Make sure that you select the checkbox for "Always use the selected program to open this kind of file"
    3. Click on OK.
    This will make Adobe Reader 9 as the default viewer for all PDFs on your system.

  • How can I make Adobe Photoshop 5.0LE work on my new PC running Windows 8?

    How can I make Adobe Photoshop 5.0LE work on my new PC running Windows 8?

    Adobe Photoshop LE is too old. I do not think it will work in compatability mode. It was made circa 1998 before XP. It is time to pony up for new software. Adobe Photoshop Elements is inexpensive and provides a world of capabilities undreamt in 1998.

  • How can I make Adobe Captivate 7 App Packager use 3.3.0 version of PhoneBuild?

    How can I make Adobe Captivate 7 App Packager use 3.3.0 version of PhoneBuild rather than the 2.5.0 version?  I tried following the instructions to upgrade PhoneBuild to version 3.3.0 - seemed to work, but Captivate is still outputting using 2.5.

    I tried that recently but could not find a way out.
    However, I figured out that we can upload the HTML5 zip file directly to the PhoneGap and build the app. This not only makes it a 3.3.0 version by default, it will also allow you to change the default app name, description, and most importantly the icon of the app.
    Sreekanth

  • How can I make Adobe Reader Touch remember where I left off?

    When I have closed a PDF, how can I make Adobe Reader Touch remember where I left off?

    Hi,
    Assuming that you have Reader 9.3.4 already installed on your machine, you can try the following to make Reader 9.3.4 as the default PDF opening application:
    1. Right click on any PDF on your system and click on the "Open With" Option in the context menu that appears. In case you get another submenu, click on Chose Program in that menu. (In case you do not see any "Open With" option, then hold down the Shift key and right click on the file)
    2. Click on Browse button in the dialog that appears, and select Reader 9. Make sure that you select the checkbox for "Always use the selected program to open this kind of file"
    3. Click on OK.
    This will make Adobe Reader 9 as the default viewer for all PDFs on your system.

  • How can I make Adobe Acrobat Pro give a warning to another person who is trying to open the same file I currently have open?

    How can I make Adobe Acrobat Pro give a warning to another person who is trying to open the same file I currently have open?

    You can't.

  • I can't make adobe digital editions 2.0

    i can't make adobe digital editions 2.0

    There's a forum for that: Adobe Digital Editions Forum
    Unfortunately, THIS isn't it.

  • How can I make Adobe Premiere Elements 9 run faster on my computer?

    I have a Dell Inspiron 1545 running windows vista 32 bit, and recently adobe premiere elements 9 has been having really rough playback, meaning it will often freeze or skip many frames when I try to watch what I have edited. It also stops responding very often. Any ideas on what I can do to fix this? Any help will be much appreciated. Thanks

    Almost any graphics adapter will do fine in PE9... it is not until you get to Premiere Pro that the graphics card makes a difference
    If you only have the usual one hard drive of a laptop, a 2nd drive will help
    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
    You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
    I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
    Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for video editing
    Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
    A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual disclaimers
    http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

  • How can I make Adobe work?

    I tried to get some information from my personnel file in Liteblue webpage. It asked me to download Adobe. I did. It said successfully but I still can't read my file. I have windows 7 and use internet explorer. How can I fix this problem?

    You wrote "download", but did you also install it?
    Also, what exactly means "can't"?

  • I've tried to fix as per your FAQ instructions, but Zeon does not work, how can I make ADOBE my default to bypass ZEON?

    I can not open many things b/c Zeon Plus doesn't work. It is not shown when I open/check current plug-ins - it's listed as unknown. I would prefer to have Adobe, as it doesn't crash all the time. How can I change this?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How can I make Adobe x to be set up properly?

    I have Windows XP and installed Adobe x. The program run great until I turned off the computer, after restarted it I tried opening  a PDF file clicking on it, it didn't work then I clicked using the right button selecting Adobe from the drop down list, it was at the head of it. When I made a click on it,  It sent me to the 
    window "Select an Application " but Adobe X is not listed there. But if I open the "Add or Uninstall window " Adobe X is listed.
    If I click on the desktop  the Adobe X Icon, a message with AcroRd32.exe (The direct access has been changed) pops out. (Maybe the Icon is
    The path is C/PROGRAM FILES/ COMMON FILES/ADOBE
    Any information about the matter will be highly appreciated.

    import java.util.Timer;
    import java.util.TimerTask;
    public class Test {
        public static void main (String[] args) {
            final Timer timer = new Timer ();
            System.out.println ("I'm gonna do something in 5 seconds.");
            timer.schedule (new TimerTask () {
                public void run () {
                    System.out.println ("Time's up !");
                    timer.cancel ();
            }, 5000);
    }if you want to display the time left it's better to make your own Thread that updates a "timeleft variable:
    {code}
    public class Test {
    //set the time Left to 3 mins.
    private long secondsLeft = 3 * 60;
    public Test () {
    new Thread (new Runnable () {
    public void run () {
    try {
    while (secondsLeft > 0) {
    //Let's update the timer every second.
    Thread.sleep (1000);
    secondsLeft = secondsLeft - 1;
    System.out.println ("Time left: " + (secondsLeft / 60) + ":" + (secondsLeft % 60));
    System.out.println ("Grats !");
    } catch (InterruptedException e) {}
    }).start ();
    public static void main (String[] args) {
    new Test ();
    {code}

  • How can I make Adobe Bridge faster?

    I really need to organize my files and goodies I have been collecting these past 10 years.  So I need to use Bridge to easily view .psd and .eps thumbnails.  But Bridge is running SO slow!  It takes a few seconds for every click.  I disabled my cloud drives and tried a cocktail of different settings.. but no dice.  Please help!  I was so excited to finally have Creative Cloud and wanted to get my computer nice and neat and now I wish I didn't delete my old version of Bridge.  There has to be a solution if my old version was able to run as nice as the other Adobe programs.
    Thank you

    Read this thread, especially #30. http://forums.adobe.com/thread/1363672?start=0&tstart=0

  • How can I make adobe premeire 10 organizer display video clips

    This is driving me crazy.
    I have reinstalled the whole adobe photoshop/premeire programs and still nothing.
    I am thinking this whole organiser thing ius a waste of good pixels because neither program needs the organizer.
    Any joy out there?

    RobertRealtor wrote:
    Soooo...How to advance the frame forward to create a usable thumbnail??
    This is possibly an oops moment. I'll need to search to find my original posting (that related to PRE7 if I recall). It was dependent on selecting a frame in the Monitor window and a right-click 'update thumbnail' in the Task Panel media view. But .... I don't see that 'update thumbnail' anymore in PRE10. Now the media panels did I think undergo a major change in PRE9 and I wonder if the update thumbnail got stripped out. If it did then it's going to need a feature request to stand any chance of it getting restored in a later version.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • How can I make adobe photoshop cs6 run faster?

    Windows 7 Ultimate
    Processor: AMD Athlon(tm) XP Processor 3000+ GHz
    Installed memory (RAM): 768 MB usable
    System Type: 32 bit operating system
    Thanks for your help!

    GrantyPanty wrote:
    How exactly do I get more RAM or install a 64 bit operating system? How much RAM do I need?
    That depends on your computer; best ask in the shop where you bought it.
    How much do you need?  The more, the better.  I have only 4GB, and my Photoshop works decently well (for the limited tasks I use it for).  If you use it heavily, probably 8GB or 16GB would be better.
    However, you can only use this memory if you use
    the 64-bit edition of Windows
    the 64-bit edition of Photoshop
    Unfortunately you cannot upgrade 32-bit Windows to 64-bit Windows; you need to install it from scratch.

  • How can I make Adobe Reader X open e-mail links in Thunderbird?

    When I click an e-mail address in Adobe Reader X, an Outlook e-mail window opens, even though Thunderbird is my standard e-mail client and assigned to the mailto: protocol.

    http://superuser.com/questions/385386/change-adobe-readers-default-program-for-e-mail-link s/510418#510418

  • How can I make adob flash player my defult?

    I have downloaded  the latest version of adobe flash player, but it doesn't work. It showed that it installed, but every time I try to use it when it's required to open a video, it isn't there and I keep being asked to download it again. HELP!

    To help troubleshoot we'll need the following system information:
    Operating system
    Browser
    Flash Player version

Maybe you are looking for

  • Problem in Packet.dll file calling with JNI

    I called wpcap.dll and packet.dll using JNI & while using native method of packet.dll, I am getting the error: The Procedure entry point PacketGetReadEvent could not be loaded in the dynamic link library packet.dll. Please help. Thanks in advance.

  • OS X Yosemite iPhoto 9.6 won't open except in full screen

    Upgraded to Yosemite, iPhoto 9.6. Mid-2011 iMac. When I open the iPhoto app, I get a top bar and the dot under the icon to indicate that the app is open, but nothing happens. I go to the menu, View, Enter Full Screen. Only then can I see anything in

  • How to get iPad to reconnect with WiFi printer.?

    I Could print from WiFi printer prior to 8.1 update.  Now my iPad only looks for AirPrint printer - which I don't have but iPad cannot connect to WiFi hp OfficeJet 8500 AIO printer as it did before update.  How to gei iPad to reconnect to WiFi printe

  • Exception handling prob

    I want to write an exception handler for forms error message ora-01403. The problem code is PRAGMA Exception_Init (login_name_doesnt_exist, -01403); It gives me an 'illegal oracle error number' when I compile. I've checked the specs and -01403 IS val

  • How to drag and drop another swf or fla into a template?

    I am building a flash website for a friend. We are using templates he purchased at flashden.net. I normally use wordpress, joomla and other such systems and am familiar with html, php, cgi and such. This is my first time dealing with a flash template