Can I make a DVD that will go for more than two hours?

Hi,
I'm working in iDVD 08, version 7.0.1, and when I drop in video that lasts over an hour, I get a warning. The original videos are around 100 MB for each hour, and iDVD won't let me add more than two. It's saying my two 100 MB videos will fill the 4.2 GB of space on the DVD.
What can I do to have the videos stay at around 100 MB each, so I can put several of them on one DVD?
Any help is most appreciated.
Russ Conte

Russ,
iDVD isn't really designed to archive old highly compressed movie files.
DV video (for which iDVD was originally designed) runs about 13 GB per hour and iDVD mpg-2 compresses everything to fit a maximum of 120 minutes on a single-layer disc. (Your files are much more highly compressed than DV and perhaps are also smaller in image size.)
If you want to 'cram' a lot more content on a DVD (and don't care about the quality) you might want to look at VisualHub that claims to let you put up to 18 hours of content on a disc.
F Shippey

Similar Messages

How can i use IDSM-2 in inline mode for more than two VLANs?

can i use the IDSM-2 in inline mode to be ips to more than two VLANS
like this or it isn't
intrusion-detection module 5 data port 1 access-vlan 10,20,30,40,50
intrusion-detection module 5 data port 1 access-vlan 100,200
thank u all for your help

The IDSM-2 ports need to be configured as trunk ports with multiple vlans rather than as access ports.
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517eb.html#wp1068377
And instead of creating an inline interface pair by pairing Gig0/7 with Gig0/8 within the IDSM-2 configuration, you would create inline vlan pairs.
With an inline vlan pair you pair 2 vlans on the same interface.
You can have up to 255 inline vlan pairs on each interface (assumining you keep the total traffic from all of the pairs within the IDSM-2s performance limit of around 500Mbps)
How to create inline vlan pairs:
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517bb.html#wp1047852
The other aspect you need to be aware of is that not all IOS versions will support configuring the IDSM-2 data ports as trunk ports for inline vlan pairs.
Your best bet is to use 12.2(18)SXF4 or a later version on the 12.2(18)SXF train.
The 12.2(33)SR train does not currently support the trunk feature for the IDSM-2.

How to make a DVD that will play on a DVD player if I don't have iDVD

How do I make a DVD that will play on a DVD player if I don't have iDVD?

First you will need a video DVD authoring applicaiton like iDVD. If you have iDVD export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

How to make a program that will ask for a name the first time the program is used and if is not the first time will not ask the name?

I want to make a program that will ask for the ID of the testing machine the first time the program is running, then will never ask for it. I'm using Labview 6.0

Hi
There are a Couple of methods you can use for this.
Method 1 -
You can create an ini file and save a boolean Key "First Instance" as True. Now In your Program you read this Key, If it is True then you can show your ID Dialog VI.If False do not run the VI. At the Conclusion of Id Dialog you can update this registry enrty to False. So In effect you have created One time Event. In fact you can save ID as another Config entry.
The Drawback and advantage is that such an INI file can be edited by someone moderately knowledgeable about the Program
Method 2
Use Unitialized Shift Register in A while Loop. Please see LV2 style Globals entry under this forum. You can read and write to this Variable and it retains the Value it last had within it.
You can read
this Global the Very first time and say if it true you display your ID Vi. If False you dont. When you display your ID Vi you can Update your Global Like Before.
If you need Example Let me Know.
Good Luck
Mache!!
Good Luck!
Mache

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

Error message that no virtual memory pops up & crashes when application is run for more than 1 hour

My application uses VISA serial operations. It has arrays to store data collected from various devices. I reinitialise the arrays each time the index reaches 50.
Data acquisitions is carried out in separate threads by invoking the runVI method.
When i run the application on Win XP continuaously for more than 1 hour it gives an error message that no more virtual memory to complete the task and the system hangs up.
I open the serial port only once and close it when the application is terminated. But serial read/write operations are done continuaously
Is the error caused due to memory leakage? How can i solve the problem. It's very urgent and i shall be thankful if i ge
t the help.

Yes, it sounds like a memory leakage (either that or you're trying to run an advanced app on an old computer w/ little memory and a small hard drive).
Things to try:
1. Ensure it's only labview, and not say labview and another application interacting. This isn't a likely case, but you never know what people have on their boxes and I've seen some weird things with virus scanners. Hit Ctrl-Shift-Esc to get the task manager. Go to processes and watch the memory consumption (click Memory twice to sort in descending order) of the various processes. If labview keeps rising, you've got a leak.
2. If only a reasonable amount of memory is being used, double check your page file settings (read virtual memory).
From the Control Panel
Select System
Select
Advanced Tab
Under Performance, select the Settings button
Select Advanced Tab
Under Virtual Memory, let windows dynamically adjust the page file (and any XP speed tweakers out there can now chime in about how wrong this is. This essentially allows windows to keep upping the virtual memory as needed by various processes.
3. Find the leak. In LV Tools->Advanced->Profile VIs. Turn on memory stats. Start the profiler. Start your vi. If the vi crashes labview totally, you'll have to keep hitting snapshot to find the leaky vi (the one that's memory keeps growing).
4. Upload the vi to the forum so we can give it a looksee.
G'luck
2006 Ultimate LabVIEW G-eek.

My iPod doesn't work. The screen is black but it has a ticking circle in the middle. Its been stuck like that for more than an hour. My iTunes doesnt recognize the iPod Touch and says 'iTunes could nit connect to this iPhone-unknown error

Its been stuck like that for more than an hour. My iTunes doesnt recognize the iPod Touch and says 'iTunes could nit connect to this iPhone-unknown error

I'm soooo sorry to bump this but MAYBE someone will know what to do?! I've just tried EVERYTHING. I need help. Please, anyone?!
*last chance and I'm backing away sloooowly*
thanks to ANYONE who will suggest ANYTHING at all!!!

HT4463 I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours. What's the problem? How can i fix?

I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours. What's the problem? How can i fix?

Mac App Store: How to resume interrupted downloads
http://support.apple.com/kb/HT4485

My 21" display on iMac (mid 2010) is overheating so much I can't sit at my computer for more than an hour or so. Also, some shadowy shapes appear in the background on the upper left of the screen.

Processor 3.06 GHz Intel Core i3
Memory 12 GB 1333 MHz DDR3
Software Mac OS X Lion 10.7.5 (11G63)
iMac 21" display
My 21" display on iMac (mid 2010) is overheating so much I can't sit at my computer for more than an hour or so. Very hot. Also, some shadowy shapes appear in the background on the upper left of the screen. Any thoughts?

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

TS3274 My iPad will not update apps. It states it is installing but it will not complete the installation. This has been going on for more than 24 hours. What do I need to do?

My iPad will not update apps. It states it is installing but if never completes the installation this has been going on for more than 24 hours. What do I need to do?

Try a reset:
1. Hold the Sleep and Home button down (together) for about 10 seconds
2. Until you see the Apple logo (very important)

How can I make a button that will work on iPads? (animate only on Mousedown)

I am making an interactive page in Adobe Edge Animate. It will double as a low-mem website and also as an iPad page and is part of a larger flash website which is highly animated.
This website sports two kinds of buttons; the ones linking to a label in the timeline and the ones linking to a URL.
The problem is that I do not want the buttons to work on mouseover because that will be completely useless on iPads and similar devices. That is why I want the thing to animate on mousedown.
What I did initially was to load the on and off states of the button to my timeline and made them into a symbol, after that I made two labels inside of that symbol; one for the on state and one for the off state. Below the first label there is a "sym.stop("ONstate");" action and then my off-state button graphic has a mousedown "sym.stop("skipON");" action. Then comes the tricky part, I wanted to reference the label on which it should land in a onclick action on a root level. It didn't work at all. I used "_root.stop("label");". As you can see my programming abilities are extremely poor, I'm a graphics guy.
Next, I decided to leave the mousedown action inside the symbol and do the onclick action on the main timeline, which did work for the most part, however it behaved weirdly. First off, the mousedown action worked perfectly, but not at the same time with the onclick action; You would click on the mousedown thing and it would stop on the frame and then you would need to click it a second time to go to the label.
There must be either something I'm doing wrong or this function is not supported by the Edge Animate beta. But my programming abilities are so poor to pinpoint the real cause of the problem.
Can anyone help me please?

Hi, redcrowdesign-
Part of the problem is that you're using ActionScript syntax in a JavaScript environment. Instead of using _root, you can access the Stage object. If your symbol is only one level down, you can use sym.getParentSymbol().stop("label");. If you have a nested symbol, you may find sym.getComposition().getStage().stop("label"); more effective.
That being said, you might want to rethink your UI model and focus your iPad interactions on the touch events, which are much more performant than the mouse events.
Hope that helps,
-Elaine

How can I eject a dvd that will not play and says "supported dish not available, also DVD player encountered a system error -69902

I am unable to eject a DVD. When I try the screen says "Supported dish not available." Before that a DVD stopped playing and the screen said 'DVD player encountere a system error -69902. How can I get the DVD out?

restart your mac while holding down on the mouse.

How can I make a timer that will record elapsed time up to 15 hours with a PCI-6503E DAQ card?

I'm a beginner LabVIEW programmer, but need to take measurements of elapsed time from the start of data acquisition for up to 15 hours. I'm using a PCI-6503E card. Looking at examples on the web and LabVIEW, itself, I was only able to find a way to take time measurements with a DAQ card up to 167 s, unless two counters were tied together, but there are no instructions on how to do that. Could someone help me? Thanks.

I suggest you to look in the Resouce Library: inside it there is plenty of useful examples.
I found this VI with two cascaded timers in the Measurement hardware > Counter/Timer > Event/Time Measurement cathegory:
http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&5293158F4EC950C4862568C1005F6CD9&cat=C7029C9ACBD3DF7386256786000F8EE6
Hope this helps.
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Sap can't calc overtime for more than 24 hours in a day

Dear experts,
I'm having problem currently with overtime, because of the following condition
1. The employee worked on saturday (let's say this was 9 jan 2010) and monday (10 jan 2010) where in both of those days, the employee should not work (FREE Work schedule)
2. The employee worked from 09.01.2010 at 6PM until 10.01.2010 at 8PM (26 hours)
3. we're using time events, so the clock in and clock out are noted in IT 2011 with the following :
    -in:09.01.2010 6PM
    -out:10.01.2010 8PM (but with assigned to prev day indicator set)
4. The overtime approval using IT 2007 is defined using this one record :
    -begda:09.01.2010     endda:10.01.2010
    -time:6PM - 8PM.
5. We can't separate the overtime entry in 2011 into two separate record, because of progressive rate of overtime. (i.e for first 10 hours of overtime, you get $10, for the next 10-20 you get $20, and so on)
However the resulting time evaluation only calculate overtime from :
09.01.2010 18.00.00 - 20.00.00 (2 hours)
10.01.2010 42.00.00 - 44.00.00 (2 hours)
for total 4 hours,
We've tried :
1. creating two of 2007 record for :
     -09.01.2010 6PM-00.00 (6 hours)
     -10.01.2010 00.00 - 8PM (20 hours)
    => result : only the first six hours were taken into account
2. create one 2007 record for :
    -09.01.2010 - 10.01.2010, with time 00:00 - 24.00
    => result : we got 26 hours. However the attendance quota shouldn't contain full day time (00:00 to 24:00), because if the employee fill the 2011 with more than he/she should eligible, he/she will get those also.
3. create one 2007 record for :
    -09.01.2010 - 09.01.2010 with hours : 26 (using unit instead of time), but if the time contains minutes (such as 18:02 or 20:18) this will needs to be calculated manually, which will be a hassle.
where what we need is total 26 hours, with using attendance quota, than can span days, but without filling manually the hour. Or perhaps something similar. Any idea how to achieve that in SAP ?
Thank you.

Hi,
this reply is related to option 1 as mentioned in your post. Can't tell for 100% whether the following makes any sense as I have never recorded overtime in IT2007. (I normally use IT2002).
But in most of my previous projects where not all recorded overtime was calculated, this was often to a missing selection rule in T554S.
Wilfred.

Can I make a DVD that will go for more than two hours?

Similar Messages

Maybe you are looking for