Can i make a horizontal picture vertical

can i make a hortizontal picture vertical

Yes, rotate it with your software.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

How can I make a horizontal accordion / vertical navigation panel?

I found the mobile compound widget article which almost gets me there. Problem is when I orient the accordion menu to open horizontally I'm not able to rotate the menu. I would love for the menu to push the content off the page to the right when it's expanded but I'm guessing that's too much heavy lifting for Muse as of yet. Even if I could get the menu to fly over my content that would be great. Any ideas?
An example:

Hi ,
I had created a small video regarding how to create such a menu using accordions in Muse sometime back. I hope this is what you are looking for
Please download the video from here :- http://adobe.ly/1pXFPh2
Regards,
Rohit Nair

How can I make my small picture disappear while on Facetime, how can I make my small picture disappear while on Facetime

how can I make my small picture disappear temporarily
while on Facetime

You cannot. That is what the other person is seeing.

I updated my iphone to ios 7.1.1 and after that my contact photo when i call or call others to me is a small cycle of that picture i choose ... How can i make a big picture when i call my contant and when others call me ?

I updated my iphone to ios 7.1.1 and after that my contact photo when i call or call others to me is a small cycle of that picture i choose ... How can i make a big picture when i call my contant and when others call me ?

It's not clear why Apple made this change; speculation (which is not really allowed in these forums) is that it was done to protect the privacy of the caller.

How can i make the beautiful pictures in bing my wallpaper?

How can I make the beautiful pictures in Bing my wallpaper?

Control-click one in Safari and choose to use it as the desktop picture. This won't work with all photos.
(70096)

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

Can you make a separate picture of a iPhoto Face?

My daugther is in lot of group pictures. I just need a solo picture of her.
Is there a way to make picture out of the Iphoto face?

Make a copy of the photo you like, then just use the Crop tool to leave only her face.

When I take a photo by ios7, I can't make the whole picture as wallpaper because the photo is enlarged

Dear Sir/Madam,
I am so excited about this place because I have been curious about this question for a long time.
After I take a photo by my iphone 5, I can't set the whole, complete photo as the wallpaper for my iphone because the photo will be enlarged.
I used to set the photo as my wallpaper when I am still using the ios6, but I don't know why the ios7 can't.
I hope someone can tell the people who work in Apple company because I don't konw how to inform them, I think it will be an important problem.
Thank you for taking the time from your busy schedule to look this

I have tried, but the photo will also be enlarged a little bit, maybe it's because my face is too big, I still can't put my whole face in the wallpaper. The photo as wallpaper is just not the same as the photo I taken, maybe I can try some small pictures, I just feel curious about this.
Thank you still for your answer! I am so happy to receive your help so fast.

How can I make with a picture only the outlines visible?

I don't come out of that, how I can only the outlines visible.

Filter>Stylize>Glowing Edges>Image>Adjustments>Invert>Desaturate (if you want a black edge)>Levels to refine the edges.

I can't make my sleeve pictures big anymore. (just downloaded the latest I-Tunes software)

I cannot show the sleeve pictures big anymore (just downloaded the latest I-tunes software)

If you mean the Cover Flow, that was removed when iTunes updated to version 11(through to the latest version 11.03.42)

When I download pictures from my camera, they turn out a nice big size in iPhoto; other pictures that have been e-mailed to me or imported from older libraries/other computers show up small. Why is this, and how can I make them all the larger size?

When I download pictures from my digital camera into iPhoto, they turn out a nice large size (usually almost the full screen), but when somebody e-mails me pictures and I import them into iPhoto, or when I transfer old photos from an old library into my new iPhoto library, they turn out very small--not exactly thumbnail-size, but too small to use for calendars or photo books. I don't know much about computers, so I don't know how this happened. Also, I can't find any discernible pattern to why this happens with some pictures and not others--ie: what I described above is usually true, but I have had e-mailed photos or old photos turn out the way I want them, which is in the larger size in iPhoto. Why is this happening, and how can I make all the pictures the larger size?

Some mail programs, including Apple Mail, can reduce the size of images that are attached to a message. It's happening at the sender's end, and all you can do is ask the sender for a larger image.

TableView horizontal and vertical scrolling is horribly slow

How can I adjust the horizontal and vertical scrolling amount?
I used the Ensemble example prorgam and streched the column so that the horizontal scroll bar is displayed. I then used the right scroll button which then scrolls extremly slow. I've looked at the javadoc on the tableview and I cannot determine how to set the scrolling amount. I can check if the table is scrolling but I would like to set the amount to be a column width at a time when using the left or right arrow.

It probably needs to be actually rendered to the Scene graph before the lookups can be made, so the lookups won't work in the initialize method.
There are a number of reasons I don't like this solution
- I don't like the string binding
- the fact that there are scrollbars that are descendant nodes of the table view is not documented, so (at least in theory) a future release of JavaFX could choose not to use the ScrollBar class (for example by creating its own scrolling implementation). This would break the code you have.
- if you decided to create (or use) an alternative skin for the table view which had other scrollbars in place (again, unlikely but theoretically possible), you'd end up setting the unit and block increments of those scrollbars too. In other words, there's no guarantee these are the actual scrollbars you want.
So, not ideal but at least if it works you have something...

How can I make a title (text) on a postcard vertical not horizontal text?

How can I make a title (text) on a postcard layout vertical not horizontal text?

Insert it in a Text Box then rotate this one.
Yvan KOENIG (VALLAURIS, France) lundi 13 juin 2011 16:20:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

TS3274 I went to an Apple store yesterday and the guy there did something and now the ipad only works in the vertical (portrait) position and not the horizontal (landscape) position. How can we make it work in both positions?

I went to an Apple store yesterday and the guy there did something and now the ipad only works in the vertical (portrait) position and not the horizontal (landscape) position. How can we make it work in both positions?

Just in case you are not running iOS 7 and don't have the control center feature.....
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it and you are running iOS 5 or 6, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If you are running iOS 7, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

How to make a still picture rotate around a vertical axis ?

H there,
Can I know how do I make a still picture rotate around a vertical axis ?
Thanks

Thanks MTD,
It is indeed one good trick ...
From your timeline, it seems that you applied a transition after each clip. Can I know why & what transition you applied ?
Can you please elaborate what you meant by "I changed the last keyframe in the last clip to a Smooth" ?
Thanks again ...
Cheers
Meg The Dog wrote:
Hi -
While Mr. Wolsky is absolutely correct that you need the other software to do the effect you describe correctly, I believe you can make an approximation of what you want using FCE. Whether or not it passes the smell test is up to you.
You can see a clip I made [HERE|http://www.spotsbeforeyoureyes.com/3DTurn_Example.mov]
Because when you rotate the frame 360 degrees using the Y-axis, the image always comes back to the same position - which gives you a handy place to match cut to the next implementation of the rotation at a slightly slower pace. The last rotation was smoothed to a stop by modifying the filter keyframe to "Smooth".
So (not acounting for the pad video at the head and tail of the clip, a 1 second clip, followed by a 2 second clip, followed by a 4 second clip to give me a 7 second move.
!http://www.spotsbeforeyoureyes.com/3dTurnTimeline.jpg!
I applied the filter to the first clip, and set it so that it went from -360 to 360 in Y axis rotation. I then copied that clip and used Command -V to apply the same effect to the next to clips via paste attributes, UNCHECKING the Scale Attribute Times so that the spinning would slow down as the clips lengthened.
Lastly, I changed the last keyframe in the last clip to a "Smooth" , and added head and tail trim to the entire effect so the bars would start static, spin and the end static.
Like I say, it's far from perfect but may either point you toward a solution or trigger ideas of your own.
MTD

Can i make a horizontal picture vertical

Similar Messages

Maybe you are looking for