Can I make a second libary on a second hard drive and how do I switch back and forth

I woud like to creat a second libary for itunes on a second hard drive.  I am using the latest itunes and lion on my imac and how do I switch back and forth.

Yes. You can.
Start iTunes with the Option depressed and that will allow you to select the library.
Allan

Similar Messages

  • I shared a movie in iMovie and created a file with the movie but then now I cannot go back in and find the original version to make future edits. What am I missing here? how do i go back and edit the original?

    Hi! I need help! I created an imovie and then shared it and cannot go back in and edit the roigianl now. I am new to Imovie and am trying to figure this out quickly as i have to get this done by tonight. Thank you

    You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    If you want to go back to 3.6x, you will find it here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

  • I can get my files to download to my hard drive.  I hit the download button and nothing happens

    I Can't get my file to download to my hard drive.  I hit the download button and nothing happens

    Audiobooks are not part of icloud.  You only get one download.
    You need to copy the audiobook to the computer with which you normally sync and sync it to your iphone

  • I have an I-Mac with 10.6.8  Does it contain an application with which I can download a webinar I'm watching to m hard drive?

    I have an I-Mac with 10.6.8  Does it contain an application with which I can download a webinar I'm watching to my hard drive?

    How to Tape a Webinar on My iMac
    Read more: How to Tape a Webinar on My iMac | eHow.com
    http://www.ehow.com/how_8675118_tape-webinar-imac.html#ixzz23HtDfcKT...
    There are ones available...
    http://www.webex.com/play-webex-recording.html

  • How can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

    how can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

    That model MBP gives you a choice of cards to use – one at a time. it is not designed for them to run in tandem - splitting up the workload.
    Russ

  • How can I make a giff button have a second state?

    how can I make a giff button have a second state?

    how can I make a giff button have a second state?

  • How can i make my keyboard not to appear on my i pad, how can i make my keyboard not to appear on my i pad

    how can i make my keyboard not to appear on my i pad, how can i make my keyboard not to appear on my i pad? couse i want to play a game and is coming on the screen is really iritating ..

    You cannot have the keyboard gone altogether, because it has to come up when an app needs input. The best way to do what you want to do is make sure that no apps are running when you are to go gaming: double click the Home button, swipe up all pages that show (not the app icon but the app page). then start the gaming. It it then still comes up, you look at what app is asking for it and set push notifiactions and autotarting off for that app in the settings.

  • I can't move photos from iPhoto to my secondary hard drive or to a burn folder.  I have never had a problem with this before.  This is something new.   They will not drop into either folder.  Nothing happens.

    I can't move photos from iPhoto to my secondary hard drive or to a burn folder.  I have never had a problem with this before.  This is something new.   They will not drop into either folder.  Nothing happens. 
    I checked my secondary harddrive and there is plenty of memory.
    I emptied my burn folder but the photos still will not drop into it.
    I created a new burn folder, no luck with this either.
    230 photos is the maximum size of the events I am trying to move from iPhoto to save elsewhere.
    I have shut down and restarted my computer.   No change. The photos still will not drop out of iPhoto.
    My Mac Computer Storage shows that I have 62.2GB free out of 249.2GB (movies, photos and contacts taking up the most space)
    My Lacie External Harddrive (2TB capacity) shows that I have 1.79TB available.  It shows that 207,729,520,640 bytes (207.73 GB on disk) are used.
    I have never had this problem before.  It is usually very easy to move my photos from iPhoto.
    I am not a computer expert (I work in surgery so don't have a need for lots of computer knowledge) so please explain in simple terms.  
    Thank you so much for any help you can provide.
    I really appreciate it.

    YES Terence!  Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop.   But that doesn't explain why I'm having to go that route now.   Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore?   I really liked the convenience of the click and drag option. 
    I don't have the time tonight to export and burn a lot of CD/DVDs.  I'll try that tomorrow and make sure my photos are moving properly.  I also need to export photos to my external hard drive to make sure that route is working. 
    Wouldn't you know that my Apple Care Plan runs out this Wednesday?!  I need to make sure everything is working properly before that expires. 
    Thank you so much for your help.   I really, really appreciate it.

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • Can't access Password Protection Manager on my External Hard Drive to unlock it

    I can't access password protection manager on my External Hard Drive to unlock it , I got updated antivirus and I always use safely remove to remove the hard drive. I see the UNLOCK APP Drive, and the Public Area, but when I run the "Password Protection Manager.exe" file at UNLOCK APP Drive, the bar will just be fulfilled by approximately 60% by showing "Loading...", then it stops for many seconds, and it starts to run the Installation file (PasswordProtectionManagerSetup_F.exe) which will delete all unlocked files if I accept it to install.
    2 TB External Hard Drive Model HD-E2
    Model No.: OAW1AGK370300BF
    201307
    Please let me know how I can access my protected files (the locked drive).

    Hi vahid22! Please provide the model number (usually on the bottom of the unit) of your Sony External Hard Drive. Thank you!

  • Deleted iTunes Media off the Mac, Can i now get it to read from my Hard Drive ?

    I started looking into this as my Mac was using Roughly 500 of 750 gig on Music. But I've only recently noticed that this is due to duplicates in My Music folder and iTunes Media. Ive done Some reading up and can't seem to find a definitive answer to what to do.
    Ive Backed up My Music and iTunes media on a External Hard-drive, My Music folders are all neat and organised and would like it to stay that way, But I've noticed iTunes media folder was a mess, This is My fault as i had the make a copy to iTunes media ticked in preferences. And the other one De-selected ( Keep Music Organised )
    So to free up space  on the Mac I'm going to delete iTunes media as this is no use to me the way it is, I can't find anything in there and it looks a mess. The Problem with this is iTunes reads from iTunes media and i would rather it read form my organised Music files on the internal Hard-drive so i can keep ontop of it.
    All my Playlists are built within iTunes as i use them in Serato for DJ Purposes , So i would like to keep these playlists and just let iTunes read from the hard drive instead Is there a way once iTunes media is deleted i can highlight a 2014 playlist for example with 250 songs in and change where iTunes looks for them so i don't have to reload all the music? with iTunes media deleted there coming up saying can't Locate File , but i will have to manually show iTunes 25000 where they are manually , Can this be done per Playlist in one big Hit?
    Thank you and hope it all made sense

    Unfortunately it is not making enough sense for me to try to make real suggestions.
    If you are going to disable iTunes media preferences then you have to be 100% organized and know how iTunes works because from that point on iTunes will stop helping you maintain your files in any way.
    Yes, it may look a mess but the whole thing is designed so you should never need to look in your iTunes folder yourself, just at the iTunes application window.  Maybe you need to do this to use your Serrato thingy but that's because you're doing something special.
    If you add a file to iTunes and have the "copy to" preference set then it will place a copy of what you add in the correct folder inside iTunes Media folder.  The only way you should have media files actually directly in other folders is if you put them there yourself or you have residual structure from pre-iTunes version 9 before media was split into folders of different kinds.
    If you disable iTunes media preferences then iTunes is absolutely terrible at following media moved to other drives.  Moving to a different drive is not really moving, it is copying and then deleting the original, and that means iTunes sees the file as being gone.
    I really get lost on your fourth paragraph.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660 More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html Where are my iTunes files located? - http://support.apple.com/kb/ht1391 iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

  • Spotlight on my iMac running snow leopard will not stop indexing the hard drive. How can I stop this?

    Spotlight on my iMac (OSX 10.6.8) has suddenly begun indexing the hard drive non-stop, causing very sluggish operation and spinning beach balls. Reinstalling the operating system has not helped, nor has repairing permissions or the disk.

    One of the first things that happens when installing a new version of OS X is that the Spotlight search app is setup to index all available hard drives.
    The indexing makes it faster and easier for the Spotlight Search app to find things on and off your Mac.
    You can either let it take the time it needs to do this (Spotlight will only do this one time, initially) OR if you just can't or want to wait for this to complete, you need to go into OS X System Prefences panel in the OS X Dock, locate the Spotlight icon.
    Click the Spitlight icon and another set of menus appear.
    Find the menu item dealing the Spotlight indexing and uncheck its checkbox to disable Spotlight indexing.

  • Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. Anyway, i deleted windows and want another OSX on there instead. How do i make this partition bigger please??

    Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. I deleted windows after i realised i wasnt enjoying using it at all and wasted my hard drive. I now decided that i want another OSX on there instead yet i have only allowed myself 10 gb on the partition. I have ben thru some programms but am struggling on making this partition bigger.
    I only want it at 20gb but cant seem to make the partition bigger, only smaller or split it into further partition.
    Is there a way to do this, i have all installation discs from original OSX so think this could help.
    Any help please would be fantastic.
    Thanks Chris

    Hi, dragging the partition will only make smaller, not larger. In disk utility you can only split or make smaller the partitions. Yes i booted from installation disks also but still no help.
    And Brody, I am willing to erase the disc completely, infact jus started doing a backup in order to do so but that failed also. And the information you gave on partition a hard drive, Although very simple and i already know how to do this, but it wont let me make the partition bigger, and i dont want to make a new partition, just enlarge the one i already have, which i dont see possible from disk utility.
    Getting really frustrated now, even backing up is saying no to me. **** external being a douche.
    I dont mind erasing the hard drive but surely this must be doable without deleting the secondary partition back t a single volume, and re partitioning into 2 volumes again.
    Thanks again

  • How can I backup my MacBook Pro to an external hard drive

    How can I backup my MacBook Pro to an external hard drive?

    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
         used to manage backups and to restore backups. Time Machine
         requires a backup drive that is at least twice the capacity of the
         drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Although you can buy a complete external drive system, you can also put one together if you are so inclined.  It's relatively easy and only requires a Phillips head screwdriver (typically.)  You can purchase hard drives separately.  This gives you an opportunity to shop for the best prices on a hard drive of your choice.  Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu.  You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available.  You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports.  I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.)  You can find enclosures at places such as;
      1. Cool Drives
      2. OWC
      3. WiebeTech
      4. Firewire Direct
      5. California Drives
      6. NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover.  Usually the only tool required is a small or medium Phillips screwdriver.

  • I want to make a TimeMachine backup in a new hard-drive I just bought. It says it has to erase the info but as the drive is new there's no info in it, so what it is going to be erased?

    I want to make a TimeMachine backup in a new hard-drive I just bought. It says it has to erase the info but as the drive is new there's no info in it, so what it is going to be erased?
    I had to format it after I bought it so that it could work with windows and Mac and I'm afraid that if I erase the info in the hard-drive, the format will also change. Is that possible to happen? Or the format will stay the same?
    Thank you

    Do you want to continue to use it to share and store files between Windows and NTFS and Mac which uses HFS?
    Maybe you need another drive. I would never have only one backup and one "live" data set.
    you probably installed something, whether it is current or well supported or not, that came with the drive to allow writing to NTFS.
    TimeMachine has to use HFS only and use Apple GPT (GUID) format.
    sometimes erase changes a drive to GUID when you click on the raw hard drive name in Disk Utility. other times you can erase a volume and leave the partition format type as is. The wording use to be clearer when people knew when and how to initialize, format and setup a drive. And sometimes a message on the screen says it will be only launches Disk Utility and not to the PARTITION tab to make changes.
    In addition to TimeMachine, having a clone of your system or data or both can be very useful as well. Drives fail.
    And with a MacBook Air you probably have a smallish internal hard drive and might need to store media files and data on another drive to supplement the internal SSD.

Maybe you are looking for

  • Hide "more" button in a list view, only works for first item in the list

    I have the following code in a list view that outputs several dozen items in a web app.  The code only works for the first item, how can I make it loop through and execute the test for each item in the list view?  The {tag_hide more button} is a chec

  • How to move cursor to a particular field in a form when the form opens

    Hi All, Using Forms Personalization how to move the cursor to a particular field in a form when the form opens.We are using Oracle Applications 11.5.10.2 Please let me know as soon as possible. Thanks, --John.                                         

  • Dynamic ALV and cl_abap_structdescr Create method

    Hi In the process of creation of Dynamic ALV, as I have char_name and char_descr fields, I have to use char_descr as column header of ALV because char_name which has entries something like DVS_******(that do not make any sense to user). I am facing 2

  • Cue point question

    Hello all, I have a question abou cue points. I have a script, see below. In that script I define some cue points. Now I want to define a action for each cue point seperate. The script: // Requires an FLVPlayback instance called my_FLVPlybk on Stage

  • Rename columns in Presentaion Layer

    Hi, I need to change the column names in the Presentaion Layer. I need only the beginning of the word to be uppercase. Do I have to go to BMM layer and use the rename wizard and get all the columns again to presentation layer. We have a lot of column