Can I make another website using iWeb,then publish it to a different server through the SMTP panel on iWeb

Can I make another website using iWeb, and then publish it to a different server through the SMTP panel on iWeb, even though I have a website published on mobile me, can I just use the SMTP engine to publish a different site but to a different server, that's the question I'm asking. I'm hoping for a quick reply. Thank you for your time in reading this.

Yes.  You can do it one of two ways: 
1 - select FTP Server in the Publish To menu (click on the site folder to get to the options) and enter the FTP address, username and password and publish as you would if using MMe.
2 - select Publish to Folder and publish. Use a 3rd party FTP client like  Cyberduck to upload the site files to there server using the FTP address, etc.
OT

Similar Messages

  • Using IDVD can I make a playable video DVD then add a folder of jpeg photos on the same Disc?

    I'm able to make DVDs from iPhoto or IMovie & I've mastered IDVD's Menus pretty well. The DVDs play ok in DVD players to that's a plus. Now, what I want to do is somehow put folders of photos .... mainly those I've used in the slideshows...... if possible, on the same DVD. The idea is I can gift a DVD with a video/slideshow & if the recipient wants the photos they can insert DVD disc into their own computer (not necessarily Apple) & download the photos. Can this be done?

    iDVD '09 (7.x): Adding photos and movies from slideshows to the DVD-ROM contents
    http://support.apple.com/kb/PH5521   <<< click here.

  • I created a website using iWeb, then published to MobileMe, how can i publish to iCloud?

    I created a website using iWeb, then published to MobileMe, Mobile Me is now closed, how can i publish to iCloud?

    iCloud does NOT allow you to host your web sites. You can continue to use iWeb but, will need a 3rd party web host to upload your websites to. Depending on the version of iWeb you are using you have a couple of publishing options:
    iWeb '09 (3.0.4) you can publish to an FTP Server or a local folder. ( With the built in FTP in iWeb you will end up with an address like "www.YourDomain.com/sitename/Home.html )
    iWeb '08 you can publish your website to a local folder
    I have been using IX Webhosting for several years with little to no problems "usually the problem was something I did" and they have been quick to solve any issue I have come across. The have plans that start at $3.95 a mo (USD) and their customer service is top notch.
    http://jeffnitschke.com/IXWebHosting.html
    http://jeffnitschke.com/wordpress/2012/06/how-do-i-move-my-mobileme-site-ix-web- hosting-blog/
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • I'm using an iPad mini can I make calls without using face time?

    I'm using an iPad mini can I make calls without using face time?

    You can use apps such as Skype For iPad from the app store, but if you are asking whether you can make 'normal' phone calls with it then no, you can't.

  • My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

    My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

    Welcome to the Apple Community.
    Delete the apps purchased by your cousin and purchase your own.

  • Is there a limit to how many pages i can have for one website using muse/business catalyst?

    is there a limit to how many pages i can have for one website using muse/business catalyst?

    Thank you. I've been searching everywhere and I couldn't find anything the mentioned it. I appreciate the feedback!

  • How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

    How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

    Plug in ethernet .. in the computer.. turn off wireless.

  • Changed email address with itunes...now i can't make a purchase using my ipad because it is showing my old address

    Changed email address with itunes...now i can't make a purchase using my ipad...old address is showing when i try to purchase an app and the old password does not work...what to do?

    Settings -> Store -> Apple ID
    In the future, please search before posting asy our qeustion has been asked and answered dozens of times in the past.

  • Can I make an mp3 using Quicktime Pro?

    can I make an mp3 using Quicktime Pro?

    QuickTime can play .mp3 files and can edit audio formats but it can't export to .mp3.
    Use iTunes for that.

  • I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

    I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

    Morning Gjakleinmark,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Best of luck,
    Mario

  • I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

    I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • How can I make my query to compare only columns of two tables... not the storage information?

    11GR2
    =-----------------------------------
    I am using below querry to compare two table that has same name, under two different users... But after making storage information false like below and  if the storage information is different on column level than it create "Alter modify " statements for the column ... How can I make my query to compare only columns of two tables... not the storage information?
    begin
    DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'PRETTY', TRUE);
    DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SQLTERMINATOR',TRUE);
    DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SEGMENT_ATTRIBUTES', FALSE);
    DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'STORAGE', FALSE);
    DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'TABLESPACE',FALSE);
    DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'CONSTRAINTS',FALSE);
    DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'REF_CONSTRAINTS',FALSE);
    DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'CONSTRAINTS_AS_ALTER',FALSE);
    End;
    select REGEXP_REPLACE(dbms_metadata_diff.compare_alter('TABLE','TABLE_NAME_A','TABLE_NAME_A','USER1','USER2'),('USER1...'),'', 1, 0, 'i') from dual

    I am using below querry to compare two table that has same name, under two different users... But after making storage information false like below and  if the storage information is different on column level than it create "Alter modify " statements for the column ... How can I make my query to compare only columns of two tables... not the storage information?
    If you want help you have to SHOW us what you are doing and how you are doing it; you can't just try to tell us in your own words.
    We can't see your computer screen.

  • Cannot publish Excel workbook to Sharepoint 2010 : "You can't open this location using this program. Please try a different location"

    I am trying to save an Excel 2010 file to a Sahrepoint 2010 document library but keep getting the error:
    "You can't open this location using this program. Please try a different location"
    Googling this suggests enabling "Desktop Experience" on the server which I have done. Excel Services Application is Started.
    Has anyone come across this and been able to resolve successfully? I am wondering if this is more security related but the security set-up looks fine.
    Any suggestions?
    Thanks

    Hi Sally, thanks for the response.  Problem is the issue occurs with all users not just me.
    On the server-side do you know if the full Office installation must exist for this to work?
    The reason I think it may be security related in some way is that on another server we can access one site collection but not another.  The first site collection shows the various libraries available and the other gives the same error: "You
    can't open this location using this program. Please try a different location".  
    It's proving to be very frustrating!

  • Can I measure AC voltage using FP-AI-102? I want to measure in the range of 0-120 VAC

    Can I measure AC voltage using FP-AI-102? I want to measure in the range of 0-120 VAC

    Hello Luis,
    The update rate on the AI-102 module is 360Hz, which means that you can only accurately acquire waveforms with frequencies below 180Hz. 
    FieldPoint wasn't made for high speed measurements, so you will have to make sure that you are able to acquire the waveform you want to with the hardware that you have.
    If you want to know how you would do the acquisition, I urge you to take a look at the LabVIEW shipping examples.
    Help»Find Examples... and browse to Hardware Input and Output»FieldPoint»Analog IO
    As for writing to the file, you can take a look at examples under Fundamentals»File Input and Output.  You can use the functions included in the Functions Palette under Programming»File I/O.
    I hope that this helps!
    Kameralina
    Ask NI (ni.com/ask)
    Search The KnowledgeBase
    NI Developer Zone
    Measure It. Fix It. ni.com/greenengineering/
    NI Vision ni.com/vision/

  • HT1539 How can a digital copy be used in a household with multiple apple ids, synced on the same computer?

    How can a digital copy be used in a household with multiple apple ids, synced on the same computer?  I want to put a digital copy on my device, and on my wife's device.
    Please help.

    you're welcome.
    actually, unless you take an extra step, the first opened swf will close.  if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

Maybe you are looking for