Can I make OS 10 Work for Me?
Hello,
I have been using BB with Verizon for many years for my company and I have my pre-OS 10 device customized such that I get pushed only the messages I want on my device and get notified by the sounds/vibrations via the profiles I want. This is critical as I do network administration and I need notified immediate when issues arise.
I have my BIS email address, [me]@vzw.blackberry.net that gets pushed instantly to my device however, before any messages get to my device, I have them filtered via settings at https://bis.na.blackberry.com/html. When message do arrive, based on the sender, a different tone/vibration occurs thanks to the highly customizable Profiles.
I have been reading that OS 10 has removed some of these features – is this true? Will I no longer be able to achieve the same results (instant filtered email with custom tones) if I upgrade?
Thank you.
Solved!
Go to Solution.
Roughly speaking, yes.
You will no longer be using a [me]@vzw.blackberry.net or BIS accounts, so you will need to set those incoming alert emails to a new account, get a gmail or outlook.com free account, and set the filtering ON the email server.
Then, you will set the notifications for that specific email account as you would like on the BB10 notifications set up.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
How can I make the thesaurus work for spanish words?
I have been using pages for about 4 months now, and usually I use it in english. I am currently writing a document in spanish but I can't manage to make the thesaurus, dictionary and wikipedia work for spanish words. I really need this to find synonyms.
Any idea what do I need to do? I don't want to change the whole pages into spanish, nor I want the spanish spell check (I know how to do that), I only need the thesaurus.Dear me, doesn't Español work?
-
Can anyone make --this fix-- work for the FONT rendering issue?
I found this bug report and proposed fix on the webkit buglist:
http://bugs.webkit.org/show_bug.cgi?id=14070
Here is a link that one says can be used to fix the
rendering issue with bold fonts.
If anyone can make this work for Safari 3 on XP please let me know....
Here are the text and link to the how to:
You can fix rendering issues by changing language for non-Unicode programs. The
instruction:
http://www.microsoft.com/globaldev/handson/user/xpintlsupp.mspx#EVE
You should restart system after applying setting.
Hope this helps someone
If not, then call apple support and complain....
maybe if their support phones are getting hot... then they
will fix this horrible bugI don't believe this is a support issue, it's rather a Bugdev issue. Use the Bug-Report field in Safari to report this directly to the engineers. I also think the bug is known and will be solved, it's therefore not really in the range of AppleCare. (Beta Software is usually unsupported!)
MacBook Pro, MacBook, ModBook, iMac, Mac mini, PowerMac G5, iBook, Apple TV Mac OS X (10.4.9) -
How Can I Make TouchEvent.TOUCH_BEGIN work for a Slider?
Hi,
I'm building an application that has a slider. The slider works great using TOUCH_BEGIN, TOUCH_MOVE, and TOUCH_END events. The problem occurs when the user is touching anywhere else on the screen then uses another finger to move the slider at the same time. The slider will not function. The first touch is being detected by the parent of the parent of the slider.
I know it has something to do with a TOUCH_BEGIN event being registered by the first touch. But using evt.touchPointID and setting a touchMoveID value (as suggested in Adobe's docs) doesn't seem to have any affect. Also, setting mouseEnabled to false on the slider.parent.parent clip does not help which I really don't get at all.
Can anyone help me figure this out? Is there a way to ignore the other TOUCH_BEGIN event or a way to prevent it in the first place?
Many thanks!Once I activate the slider with a begin event, the slider moves no matter where I am on the screen. This is because I put the event listener for the move and end events on the stage. The slider is not a component. I built it. I'm using the code under the Touch Point ID section found here as a model:
http://help.adobe.com/en_US/as3/dev/WS1ca064e08d7aa93023c59dfc1257b16a3d6-7ffe.html
Thanks for your persistence. I've been at this for several hours today. -
I tried to set up two users on one computer, now I can't make iTunes match work for either.
Lots of people seem to be having multiples user problems on iTunes, but I can't find a solution to mine so please help.
I got a new iMac. Switched it on. Connected to iTunes Match - all fine and dandy.
After a couple of weeks I decided I should follow Apple's advice and set up a separate user account on the imac for my wife. I connected to iTunes match using her user name and down loaded a bunch of her favourite music.
Naive fool that I was, I didn't realise I had fallen into Apple's moronic multi-user trap. Only one user on one computer can use it???? Why???
I thought that it was me being stupid so I switched everything off - including iTunes Match. Now nothing works.
If I log on with my iTunes ID and try to switch on iTunes Match it asks me if I want to add this computer, and then gives me the "This computer is already associated with an Apple ID - you can't use it for 90 days" message.
If I use my wife's iTunes ID, it asks her if she would like to subscribe for £21.99 a year.
The exact same thing happens whether I sign into the computer itself with my account or hers.
This is awe inspringly annoying. Please tell me how to fix this.
thanks.At this time there is no "solution." You'll simply have to wait the 90 days to re-enable iTunes Match.
For now here is my suggestion. In your User Account, in OS X, sign out of whatever iTunes Store account you are signed in with. Then sign in with your store account and leave it at that. Now sign out of your OS X User Account, sign into your wife's OS X User Account and sign into the iTunes Store with her Apple ID (if necessary sign out of the account first).
Now, you can go back to your OS X User Account and attempt to enable iTunes Match. You will probably get the "wait 90 days" message. If so leave it, mark your calendar, and wait for the 90 days to expire. You can try contacting iTunes Store support at <https://expresslane.apple.com> if you wish, but I really do not know how useful that will be.
Incidentally, you get the message to pay for the service when trying to enable it on your wife's Apple ID because the service has not been purchased using that Apple ID. iTunes Match is designed to be a single-user service that is never signed out of and is associated with one, and only one, Apple ID and a regional store. -
How can I make CONTAINS query work for a date range
In either 9i or 10g (eventual). I have a CONTEXT index that contains multiple columns from multiple tables and using a USER_DATASTORE. E.g., I have names that come from 3 different table locations and dates that come from 4. I can index them fine but how can I perform a single consolidated CONTAINS query against the single CONTEXT index to do the following:
smith WITHIN lname AND john WITHIN fname AND dob BETWEEN '19870315' and '19970315'
I know that I can use a mixed query but this is inefficient (esp since I have birth dates in multiple tables). Is there any algorithm for a range operator (>, <, between?) within the CONTAINS operator?
CTXCAT index is not an option, as I have many text columns I am searching.
Thanks!When you run the cdstore.sql, in addition to creating the ctx_cd package, it also creates the friedman package that contains the algorithm that the ctx_cd package uses. You could use the functions from that friedman package in your procedure for your user_datastore and in the creation of your query string, as demonstrated below.
SCOTT@orcl_11g> CREATE OR REPLACE PROCEDURE my_proc
2 (p_rowid IN ROWID,
3 p_clob IN OUT NOCOPY CLOB)
4 AS
5 BEGIN
6 FOR r IN
7 (SELECT emp.ename, emp.job, emp.hiredate, dept.dname
8 FROM emp, dept
9 WHERE emp.deptno = dept.deptno
10 AND emp.ROWID = p_rowid)
11 LOOP
12 DBMS_LOB.WRITEAPPEND (p_clob, 7, '<ename>');
13 DBMS_LOB.WRITEAPPEND (p_clob, LENGTH (r.ename), r.ename);
14 DBMS_LOB.WRITEAPPEND (p_clob, 8, '</ename>');
15 DBMS_LOB.WRITEAPPEND (p_clob, 5, '<job>');
16 DBMS_LOB.WRITEAPPEND (p_clob, LENGTH (r.job), r.job);
17 DBMS_LOB.WRITEAPPEND (p_clob, 6, '</job>');
18 DBMS_LOB.WRITEAPPEND (p_clob, 7, '<dname>');
19 DBMS_LOB.WRITEAPPEND (p_clob, LENGTH (r.dname), r.dname);
20 DBMS_LOB.WRITEAPPEND (p_clob, 8, '</dname>');
21 DBMS_LOB.WRITEAPPEND (p_clob, 10, '<hiredate>');
22 -- apply friedman algorithm to date column ------------------
23 friedman.init
24 (TO_NUMBER (TO_CHAR (TO_DATE (19000101, 'YYYYMMDD'), 'J')),
25 TO_NUMBER (TO_CHAR (TO_DATE (21001231, 'YYYYMMDD'), 'J')));
26 DBMS_LOB.WRITEAPPEND
27 (p_clob,
28 LENGTH (friedman.encodedate (r.hiredate)),
29 friedman.encodedate (r.hiredate));
30 --------------------------------------------------------------
31 DBMS_LOB.WRITEAPPEND (p_clob, 11, '</hiredate>');
32 END LOOP;
33 END my_proc;
34 /
Procedure created.
SCOTT@orcl_11g> SHOW ERRORS
No errors.
SCOTT@orcl_11g> BEGIN
2 CTX_DDL.CREATE_PREFERENCE ('my_datastore', 'USER_DATASTORE');
3 CTX_DDL.SET_ATTRIBUTE ('my_datastore', 'PROCEDURE', 'my_proc');
4 END;
5 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> CREATE INDEX my_index ON emp (ename)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS
4 ('DATASTORE my_datastore
5 SECTION GROUP CTXSYS.AUTO_SECTION_GROUP')
6 /
Index created.
SCOTT@orcl_11g> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'DEPT')
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'EMP')
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> VARIABLE cstring VARCHAR2(4000)
SCOTT@orcl_11g> BEGIN
2 :cstring := 'smith WITHIN ename';
3 :cstring := :cstring || ' AND ' || 'clerk WITHIN job';
4 :cstring := :cstring || ' AND ' || 'research WITHIN dname';
5 -- apply friedman algorithm to search criteria ---------------------------
6 friedman.init
7 (TO_NUMBER (TO_CHAR (TO_DATE (19000101, 'YYYYMMDD'), 'J')),
8 TO_NUMBER (TO_CHAR (TO_DATE (21001231, 'YYYYMMDD'), 'J')));
9 :cstring := :cstring || ' AND ((' ||
10 friedman.integercontainscriteria
11 (TO_NUMBER (TO_CHAR (TO_DATE ('19800315', 'YYYYMMDD'), 'J')),
12 TO_NUMBER (TO_CHAR (TO_DATE ('19810315', 'YYYYMMDD'), 'J')),
13 'B')
14 || ') WITHIN hiredate)';
15 ---------------------------------------------------------------------------
16 END;
17 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> SET AUTOTRACE ON EXPLAIN
SCOTT@orcl_11g> SELECT *
2 FROM emp
3 WHERE CONTAINS (ename, :cstring) > 0
4 /
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-80 800 20
Execution Plan
Plan hash value: 1887222286
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 37 | 4 (0)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| EMP | 1 | 37 | 4 (0)| 00:00:01 |
|* 2 | DOMAIN INDEX | MY_INDEX | | | 4 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - access("CTXSYS"."CONTAINS"("ENAME",:CSTRING)>0)
SCOTT@orcl_11g> -
How can i make the valueChangeListener works for all item under foreach?
Hi,
My jspx file have the following content:
<af:forEach items="#{pageFlowScope.directiveStep.paraItems}"
var="item">
<af:panelLabelAndMessage label="#{item.name}"
id="plam2"
for="soc1">
<af:panelGroupLayout id="pgl2"
layout="horizontal">
<af:selectOneChoice id="soc1"
value="#{item.howValue}"
required="true"
valueChangeListener="#{pageFlowScope.directiveStep.howToSetDirectivePropValueChange}"
autoSubmit="true">
<f:selectItem value="Set Value}"
id="si1"/>
<f:selectItem value="Choose a Value"
id="si1"/>
</af:selectOneChoice>
<af:switcher facetName="#{item.selectWay}"
id="switch1">
<f:facet name="true">
<af:selectOneChoice id="soc2"
required="true"
value="#{item.value}">
<f:selectItems value="#{pageFlowScope.directiveStep.procVarItems}"
id="si2"/>
</af:selectOneChoice>
</f:facet>
<f:facet name="false">
<af:inputText id="it1"
required="true"
value="#{item.value}"/>
</f:facet>
</af:switcher>
</af:panelGroupLayout>
</af:panelLabelAndMessage>
</af:forEach>
The ui is like:
label name | selectOneChoice : 'Set Value' or 'Choose a Value' | inputText (if it is 'Set Value') / selectOneChoice (if it is 'Choose a Value')
The weird thing is when i click the selectOneChoice of the two or later row, the ValueChangeListener will be invoked, it indeed change the value of 'selectWay' correctly. But the UI will not update. If later i do the same thing to the first row, all other rows in UI will update corrently.
Any suggestions? Very appreciated for any repiles.
Thanks.Hi,
on problem I spot is that all your components created by the forEach loop have the same ID value. I suggest you change the ID to e.g. id="soc_#{item.index}" for zhe select one choices. In addition, I don't see where you refresh components after the change
Frank -
I just bought a (used) Iphone 3gs for wife and it had angry birds and $89 Navigation on it (I paid extra for it). Once updated and logged into my I-tunes it no longer works? How can I make those apps work?
Apple doesn't have anything to do with this other than enforcing the DRM protection. The developers of this content expect to be paid if someone wants to use their content. When you purchase content in the app store, you purchase a license to use the content. This license does not permit you or anyone else to resell or give this content away. The individual you purchased the phone from simply does not have the right to sell or give away any purchased content on the phone. You were deceived.
-
I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?
apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together. -
How can I make my movies pro for mac work?
How can I make my movies pro for mac work?
I have downloaded it i click on the icon but I cant make it workDelete the app using this free utlity > Download AppCleaner for Mac
Then re download the app using the same Apple ID it was originally purchased from. You won't be charged again.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
If you still have problems, I located the app developer's website. Contact details for help here > http://www.mymovies.dk/about.aspx -
My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work???? I know it is not dead because I can see the apple logo on, and every time I connect it to a USB port to charge, or a wall charger, the battery appears with a bit of red. Still, it wont turn on. It's been like this for three days now and I haven't stopped charging it. IT just WONT charge? Any tips I can use to solve the issue?
-EstebanHello estebie67,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like the iPhone is experiencing issues upon startup, and may not be loading the firmware or operating system correctly. If you have not already done so, try resetting the iPhone while connected to power:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, it will be best to restore the iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
Can you make a Keyword Collection for entire event library?
Hello all,
So you make an event, and you can make Keyword Collections for that particular event, such as "WS" or "Person 1" or "Indoors"... But...
What if those keywords apply to other events?
I am making video content for a particular company. I shoot stuff one day import as an event. The only content that I produce is for this company, so you can imagine there are going to be similar themes across mutable events...
As you know this is how it is organized >
DRIVE
>2012
>Event
>Keyword Collection
This is how I want to get organized>
DRIVE
Master Keyword Collection
>2012
>Event
>Keyword Collection
> Here is an example of how I think It should be
DRIVE
"All Interior Shots"
>2012
> Event
>Interior Shots
So can you make a Keyword Collection for entire event library?
Can some one please explain if is this is possible? If not please update!Andy,
Yes you can but that feature only works if you are searching a single event (Pretty Cool/Useful), Creating a smart collection based on what you tick off in the dialogue box... You will get an error message if Searching the drive itself:
LOL
I did some playing around...
I created a new event
Then I ran a search, with Keywords ticked off, Ticking off mutable Keyword Collections.
Then dragged the results into my new event.
This in effect created "saved search results" but Final Cut started copying clips to that event folder that was created on my external HD. I was hoping that It would generate alias files...
I also...
Created a new project
Ran the Search with Keywords
Dragged all clips into the project..
This also in effect created "saved search results" but not really what I was hoping :/ -
how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen
You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red. -
How can I make a bootable disk for Mountain Lion?
How can I make a bootable disk for Mountain Lion?
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion. -
How can I make a "property node" for a VI?
Hello!
If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
Anyone have an example on this?
In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
/AmirYou really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
Try to take over the world!
Maybe you are looking for
-
New Realplayer 10.5 with Harmony Technology supports Zen produ
hi, not sure if anyone knew about this but the New Realplayer 0.5 with Harmony Techology supports Zen products. It's a free download as well. It even works with my zen micro. Just wanted to share this information. Maybe it might help those having tro
-
I can no longer send an email link to a web page on Safari 5.1.10. I get a Mail error message. How can I fix this?
-
How to retreive the modified XML data?
Hi.. i had a problem in retrieving the modified xml data. Iam using apache's DOMParser In the my class my xml data is stored in a string.so i used following statement to read xml data from that string: String abc="<? xml version=... some data goes he
-
Upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4
Hi all, I goint to upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4 on Solaris 9, in the README file(patchset) does not say that upgrade the OCR, but int he Doc ID 316889.1 to say; it is necessary to upgrade or nothing happens if Iit does not upgrade?
-
How do you control printing preferences on a digital printer?
Working on Indesign fine, but printing is a nightmare! I print to a Ricoh afficio 2000 RCPS and use the printer's interface to choose,paper tray, duplex, black or colour, which tray to use, what type and size of paper, collating, staplig and which de