Can I make Sharp Corners in Curves Adjustments?

Hi all. I'm making an illustration which will be printed using a process that does not hold fine detail well.
In fact I've been advised that anything below 13% will not print, so that the light ends of gradients for instance, will end in a hard line.
Accepting that is the case, i was hoping to make a curves adjustment to sit on top of my illustration to soft proof the 13% drop off.
I don't want to effect the rest of the image - just 'chop the end off' as it were. I've attached a pic of what I want in magenta - a sharp edged corner at the 13% mark. Is this possible? Or is there a better way?
CS4 BTW.

You may be able to approximate that by adding enough anchor points and manipulating the curve as you add each one:
However, I have no idea what it does to a CMYK image, as I only deal with RGB files myself.
Hope someone else has better ideas.
Wo Tai Lao Le
我太老了

Similar Messages

How can I make the edges of the JSC component curved?

It is a very common practice to make the edges curved in web development. Curved edge looks attractive and professional. (for example see blog.com)
How can I make the edges of the JSC component curved? For example, consider Textfield component, how to make the the sharp edges smooth and curved?
Thank you very much.

Follow the steps below implement rounded edges for tabs in a tabset component:
1)Create 2 images: level1_selected.jp and level1_deselct.jpg to be used as the background for these tabs. Thse images can be easily craeted using windows paint software. Just ceate a rectangular image of size 200X30 and draw a rounded rectangle on it.
2) Redefine the following styles in your application stylesheet(originally defined in css_master.css)
.Tab1Div td.Tab1TblSelTd {
     background-color:#EDF5F8;width: 200px;height:40px;background-image:url(images/level1_selected.jpg)
.Tab1Div td.Tab1TblSelTd {
     background-repeat:repeat-x;background-position:left bottom;border-bottom:none
.Tab1Div td {
     background-color:#EFEBEF;width: 200px;height:40px;background-image:url(images/level1_deselect.jpg);border:none
.Tab1Div td {
     background-repeat:repeat-x;background-position:bottom left
a.Tab1Lnk:link, a.Tab1Lnk:visited {
     display:block;padding:8px 15px 0px;font-weight:bold;text-align:center
Results: By doing this you'll have the selected and unselected tabs show up with rounded egdes and also the selected tab will look bigger than the unselected tas making it more prominent.

Main iTunes screen: can't make any adjustments to select-deselect apps,etc

I'm helping a PC friend of mine. He has iPad 2, W7-fresh install, latest iTunes with iPad connected and viewing the contents on main iTunes screen, he can not make any adjustments to selecting apps (putting a check box next to app to include in next sync for ex.) He can not click on the mini ipad desktop screens for each page (along side the right side) to jump to different pages and rearrange icons. WEIRD! I've never seen this on the Mac side.
Almost seems like some type of permissions issue in windows...??? HELP ! ! !

solved it. He was working between 2 PCs and did not "Authorize" under AppleStore menu listing for this new PC.

I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to print any of these photos?

I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to adjust or print any of these photos? IO have no ther projects with this problem. My Aperture Library is automatically saved to two external drives.
Dick Koos

I have one folder with several projects all of which Aperure can not find the original.
Have you checked inside your Aperture library, if the original files are still there?
Try to find out, when the images in those projects have been originally imported, then open the Aperture library by ctrl-clicking it and using the command "Show package contents" from the pop-up menu. In the window that will open, select the folder "Masters" and browse the contents. You need to find the subfolder with the year you imported the images, then the folders with the month and the day.
Are your original files still there?
If yes, copy them to a folder on your desktop for safe-keeping, and then try, if repairing the permissions and the other Furst Aid tools will help Aperture to connect to these missing files again - see this link: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
If the First Aid Tools don't help, then check, if Aperture has moved the missing images to a "recovered folder". If not, reimport the images, you saved to your Desktop and use the Lift&Stamp tool to transfer any adjustment and captions to your reimported images.

I exported a iphoto slideshow to desktop, converted it to mpg file by using BURN app, burned to DVD and exported to a USB flashdrive. The DVD looks great but flashdrive is extremely fuzzy. What is the difference and how can I make flashdrive sharper?

I exported an iphoto slideshow to desktop, converted it to mpg file by using the BURN app, burned it to a DVD and exported it to a USB flash drive. The DVD looks great and very sharp but the slideshow on the USB flash drive is extremely fuzzy. What is the difference and how can I make the slideshow on the flash drive look as sharp as the DVD?

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.

How Can I Make The Corner of My Clips Curve Instead of Square (Suzuki Clip)

I need to make the *corners of my clips rounded* instead of square (Like the *Suzuki commercial* example in FCP Training DVD)I have looked everywhere in the manual and in Motion. I have search YouTube as well. does anyone here know how to do that?
Thanks in advance

Make a matte in Photoshop.
From the Photoshop menu bar: File > New > Film & Video Presets. Choose one that suits your FCP project pixel dimensions. Make the background black. Place a white rectangle with rounded corners on top (the white will determine how much of your picture is visible). Flatten Image. Save as TIFF. Import into FCP.
Move your video clips up to V2. Place the imported TIFF on V1. Highlight all clips on V2.
Go to Modify > Composite Mode > Travel Matte Luma. Done.
If you want soft edges, no need for a matte. Double click your clip to place it in the Viewer. Open up the Motion tab > Crop > Edge Feather. Nice and quick. Copy and Paste attributes for the other clips.

How can I make a brush that starts and ends in a thin line?

I am looking to make a brush that I can use for cartooning in CS6 that starts out thin, gets thicker with pressure (I have a cintiq), and ends in a thin line. Does anyone have the expertise to make one?
Thank you.

I watched the first half of the tutorial from your link and some parts of the rest. It is a good tutorial. He is using an art brush which profile was created from an elliptical shape with sharp corners which gives that ink kind of appearance which is good for this kind of style. Most of the time though I prefer the appearance of the rounded ends of the calligraphic brushes. Also one advantage of the calligraphic brushes is that it can change its size or the size of the selected strokes with the [ and ] keys on the keyboard while with the art brushes this is done by changing the stroke weight which also can change the weight of calligraphic brushes in addition to the [ and ] keys.
Like in the tutorial I often use a similar workflow ending up with the brush strokes converted to filled paths but I simply use expand appearance then remove the unwanted parts with the Eraser brush which can be made pressure sensitive in the options that you get when double clicking the Eraser tool. This is less precise than the technique the guy is using in the video tutorial but it is quick, I like the hand touch appearance of the imperfections, and it also allows me to paint the white (transparent) highlights like for example the highlights on the booths of my cowboy. The Blob brush is the tool above the Eraser in the Tool panel and works basically the same like the Eraser but it adds to the fill of a path and it also has these and more options when you double click it. I use it most of the time in a combination with the Eraser to add or remove final details of illustrations started initially with brush strokes and then expanded. And like in the video tutorial I also like to keep a copy with the stage before expanding the brush strokes in case I need some changes on brush stroke level.
I also use a different technique for adding new color fills on the illustrations instead of cutting paths with the knife. I don't like the knife because I often do not like the first cut which I may realize later when undo is not the best workflow. What I do is copy paste in front the path and use the pencil tool set to edit the selected paths and change the shape of the selected path similar to using the knife but the pencil has to start and end on the path. The advantage of this for me is that the new fill with the different color is overlapping the original fill behind and when later I decide to change its shape I don't get gaps between the two colors which is what will happen if the knife was used.

How can I make this shape?

How can I make this shape in fireworks:
I want some images in my website to have rounded corners. Im doing this by adding 4 divs with background images and absolutely positioning them, one over each corner of the image. The background images are PNGs with transparent areas. This works as the site's background is a solid color, so the rounded corners dont need to actually be transparent.
The issue im having is that the pixels on the curve need to be semi transparent. Id love to make this shape as a vector but I dont know how.
Thanks

Hi,
There is another simple way to get the shape desired. Create a rounded rectangle that is twice your corner size - both width and height wise. Now adjust the rounded corners to almost make a circle (pull the yellow corner handle towards the center of the side). Now click the corner and you will be able to toggle between the different corner types. You can now either use the shape as it is (if you need it for corners of a sprite rounded rectangle) or you can cut it up to get the desired wedge.
- Anita

Text stroke not creating sharp corners.

Hi Everybody,
I've run into a peculiar problem.
I've got a text layer with quite a thick stroke (13 pixels). "Line Join" is set to "Miter" (for sharp corners). The problem is the stroke on one letter ("t"), is not sharp, but "cuts off". I know in Illustrator, you have a "Miter Limit" setting to fix this. Is there a way in AE to fix this? I need the text to animate, so I can't use a path of bitmap layer. Any thoughts on this?
Regards,
Nico

I would assume that this is not an AE problem. In the place where it doesn't behave correctly, most likely two nodes in the text contour are very close, resulting in unfavorable calculations. Short of editing the font there would be no way to "fix" this. You can, however, just use the Stroke layer style. If you make the text larger and set it to Inner Stroke, it willl be sharp. Since it is calculated as pixels, not vectors, it would not suffer the problem of the text outline...
Mylenium

Sharp corners not defaulting to sharp stroke

Sharp cornered items such as star or a simple rectangle should always default to sharp corners for strokes, not mitered or rounded ones.
Mylenium

Thanks Sudarshan. I've marked your answer as correct, but do you know to modify what has been drawn with the pencil? For instance, if I want to add 10 to all inputs in the inclusive range of 65-75, I can click in the curves dialog at (65,75) and then shift-click at (75,85) to create a sloped straight line which does what I need, but it's quite difficult to get the mouse to 'hover' precisely on those values. One of the nice things in the regular curves dialog is you can press the + and - keys to move through the adjustment points and then use the arrow keys to precisely position them.
Matt

How can I make the execution of my script faster

Hi everyone
How can I make the execution of my script faster, because it takes a lot of time to execute? The following is my script:
DECLARE
CURSOR C1 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
CURSOR C2 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
big_syb_qty_issue number(12,3);
small_syb_qty_issue number(12,3);
big_issue number(12,3);
small_issue number(12,3);
item_syb_code varchar2(30);
big_syb_qty_rec number(12,3);
small_syb_qty_rec number(12,3);
BI_SUPP_REC number(12,3);
SM_SUPP_REC number(12,3);
big_syb_qty_ADJ number(12,3);
small_syb_qty_ADJ number(12,3);
big_ADJ number(12,3);
small_ADJ number(12,3);
big_syb_qty_rec_iner number(12,3);
small_syb_qty_rec_iner number(12,3);
BI_INTER number(12,3);
SM_INTER number(12,3);
cl_big_qty number(12,3);
cl_small_qty number(12,3);
cl_big_qty1 number(12,3);
cl_small_qty1 number(12,3);
BIG_QTY_OPEN number(12,3);
SMALL_QTY_OPEN number(12,3);
BEGIN
     IF ((:FRM_STORE IS NULL) OR (:ITEM_FRM IS NULL) OR (:ITEM_TO IS NULL) OR (:DATE_FRM IS NULL)) THEN
          SHOW_MESSAGE('You Should Enter the Parameters Values Correctly Please try again !!!! ');
          RAISE FORM_TRIGGER_FAILURE;
          GO_FIELD('DATE_FRM');
     END IF;
DELETE FROM STOCK_AT_DATE_REP2;
COMMIT;
cl_big_qty := 0;
cl_small_qty := 0;
-- MESSAGE('Please Wait The System Calculating The Transactions !!!');
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'BUSY');
FOR R IN C1
LOOP
cl_big_qty := R.CART_QTY ;
cl_small_qty := R.QUANTITY_ON_HAND;
-- Transerfer Data 1
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_issue,small_syb_qty_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then big_syb_qty_issue := 0;
small_syb_qty_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec,small_syb_qty_rec
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then big_syb_qty_rec := 0;
small_syb_qty_rec := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 1
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_ADJ,small_syb_qty_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then big_syb_qty_ADJ := 0;
small_syb_qty_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec_iner,small_syb_qty_rec_iner
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
big_syb_qty_rec_iner := 0;
small_syb_qty_rec_iner := 0;
when others then message(10,sqlerrm);
END ;
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_issue,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec_iner,0));
big_syb_qty_ADJ := -1 * NVL(big_syb_qty_ADJ,0);
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_issue,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec_iner,0));
small_syb_qty_ADJ := -1 * NVL(small_syb_qty_ADJ,0);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty); srw.message(2000,'cl_small_qty'||cl_small_qty);
INSERT INTO STOCK_AT_DATE_REP2
VALUES(R.STORE_CODE,R.ITEM_CODE,cl_big_qty,cl_small_qty,R.ST_UNIT,R.SA_UNIT,:DATE_FRM,
:DATE_TO,0,0,0,0,0,0,0,0,cl_big_qty,cl_small_qty);
cl_big_qty := 0;
cl_small_qty := 0;
END LOOP;
COMMIT;
FOR R IN C2
LOOP
-- Transerfer Data 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_issue,small_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then
big_issue := 0;
small_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_SUPP_REC,SM_SUPP_REC
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('1- SM_SUPP_REC '||' '||SM_SUPP_REC );
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then
BI_SUPP_REC := 0;
SM_SUPP_REC := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 2
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_ADJ,small_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then
big_ADJ := 0;
small_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_INTER,SM_INTER
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
BI_INTER := 0;
SM_INTER := 0;
when others then message(10,sqlerrm);
END ;
BEGIN
     BIG_QTY_OPEN := 0;
SMALL_QTY_OPEN := 0;
BEGIN
SELECT NVL(S_BIG_QTY_OPEN,0) ,NVL(S_SMALL_QTY_OPEN,0)
INTO
BIG_QTY_OPEN,SMALL_QTY_OPEN
FROM STOCK_AT_DATE_REP2
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
END;
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_issue,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_SUPP_REC,0));
big_adj := -1 * NVL(big_adj,0);
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_adj,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_INTER,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_issue,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_SUPP_REC ,0));
SMALL_adj := -1 * NVL(SMALL_adj,0);
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_adj,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_INTER,0));
END;
BEGIN
UPDATE STOCK_AT_DATE_REP2
SET BIG_SUP_REC = BI_SUPP_REC,
SMALL_SUP_REC = SM_SUPP_REC,
BIG_ISSUE_TRAN = big_issue,
SMALL_ISSUE_TRAN = SMALL_issue,
BIG_ADJUST = big_adj,
SMALL_ADJUST = SMALL_adj,
BIG_INTER_REC = BI_INTER,
SMALL_INTER_REC = SM_INTER,
S_BIG_QTY_OPEN = BIG_QTY_OPEN,
S_SMALL_QTY_OPEN = SMALL_QTY_OPEN
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
exception
when no_data_found then
NULL;
when others then
message(10,sqlerrm);
END;
END LOOP;
COMMIT;
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'default');
SYNCHRONIZE;
-- SHOW_MESSAGE('The Data Have Been Calculated !!!');
END;
declare
     pl_id ParamList;
APPLICATION_ID VARCHAR2(20):='PRD';
          COMMAND_LINE VARCHAR2(100) :='STOCK_LEDGER';
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DATE_FRM',TEXT_PARAMETER,:DATE_FRM);
Add_Parameter(pl_id,'DATE_TO',TEXT_PARAMETER,:DATE_TO);
Add_Parameter(pl_id,'ITEM_FRM',TEXT_PARAMETER,:ITEM_FRM);
Add_Parameter(pl_id,'ITEM_TO',TEXT_PARAMETER,:ITEM_TO);
Add_Parameter(pl_id,'FRM_STORE',TEXT_PARAMETER,:FRM_STORE);
IF :REPORT_TYPE = 1 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
ELSIF :REPORT_TYPE = 2 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER_2.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
END IF;
END;
Waiting for your valuable answer
Best Regards
Jamil Alshaibani

Make a matte in Photoshop.
From the Photoshop menu bar: File > New > Film & Video Presets. Choose one that suits your FCP project pixel dimensions. Make the background black. Place a white rectangle with rounded corners on top (the white will determine how much of your picture is visible). Flatten Image. Save as TIFF. Import into FCP.
Move your video clips up to V2. Place the imported TIFF on V1. Highlight all clips on V2.
Go to Modify > Composite Mode > Travel Matte Luma. Done.
If you want soft edges, no need for a matte. Double click your clip to place it in the Viewer. Open up the Motion tab > Crop > Edge Feather. Nice and quick. Copy and Paste attributes for the other clips.

How can I make a fade out effect at the end of the song in garageband for iPad?

I want to made this effect but honestly I have no idea about what I have to do. u.u Please help.

ClaudioWalrus wrote:
How can I make a fade out effect at the end of the song in garageband for iPad?
GB for iPad doesn't have volume automation, you'd need to import the project into GB on a Mac to create the fade with a volume curve.
as an alt, finish your song and export the audio file, then import the audio file in an audio editor and create a volume fade with that:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Can't make and answer calls using handset. But just works fine with speaker

I have a Blackberry Curve 9630 ,
I can't make or answer calls from the handset. Caller is able to hear
me when call is picked up but I can't hear them. I can only make or answer
the call using speaker option. And works fine this way. Have tried re-booting
but doesn't work. Never experience this before and phone was working
perfectly right up to this morning. All otheres like BBM, Email, SMS, apps,
are working fine.
Appreciate a quick reply on the same. Thank you.

Can you test playing music through the BlackBerry and see if it is audible through both the speaker and the earpiece?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I make a fence disappear in PS CS6?

Hi, I can select the fence - change the color but how can I make it appear to disappear
Thanks, for constructive help...
Best, Bee

beebibi12 wrote:
Trevor Dennis, The healing brush set to Content Aware in combination with the Shift key etc. works great for straight lines but in my case the strings are not in a straight line
Best, Bee
Your'e kidding me. Right? You don't have to do the entire length of the line in one stab.
beebibi12 wrote:
Could you please expand on the idea with the alpha channel mask and Curves adjustment layer -
Thanks,
Best, Bee
Forget the Alpha mask idea. I'm home now and it is a total non starter in this case. But try some of these if you want to learn the technique

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.

Can I make Sharp Corners in Curves Adjustments?

Similar Messages

Maybe you are looking for