Can i make subcircuit in multisim like subvi in labview?

in my project i have to work in modules, so can i connect those?
like we use SUBVI in labview, can i make subcircuit in multisim?
Solved!
Go to Solution.

Yes! You can just right select all the components you want to make a subcircuit out of and right click » Replace by subcircuit...
You now have a subcircuit that is saved with your design. If you like having different files for your modules (I personally do), you can instead create the subcircuit in a different file, attach HB/SC connectors to the pins you want to send the signals outof/into, save the file and in your main circuit, right click » Place on schematic » Hierarchical block from file... this way, the module can be reused as many times as you like.
Cheers,
Miguel V
National Instruments

Similar Messages

Who can i make a set-reset flip-flop with labview interacting with for cycle outputs

Who can i make a set-reset flip-flop with labview interacting with for cycle outputs

Are you wanting a VI that emulates a RS filp flop, or do you have a question about using an actual one?
You can make a RS flip flop by knowing the 4 states:
R=0, S=0, Q=no change
R=0, S=1, Q=1
R=1, S=0, Q=0
R=1, S=1, Q=?(invalid condition)
I have attached a RS flip flop VI in LV version 6.0
dhuff
Attachments:
RS_Flip_Flop.vi ‏34 KB

How can i make my mac run like new

What can I do to make my computer run like when I first bought? Thanks

I am confused. You posted in the FaceTime for Mac Forum and your profile says iPhone and iOS. So what is you are asking about here that is performing slowly? More details would really help.
Allan

How can I make a photo look like it's on a 3D Box Canvas?

Hi,
I have been scratching my head trying to figure out a way to make a photo look like it's wrapped around a wooden frame, like on a box canvas. I'm not concerned with the canvas texture, I just want to know how I can apply an effect or an action to a single image to give it depth. Any ideas?
Ross

the one i posted was a psd file using a smart object. Double click the smart object it then opens a new file, you add the photo you need, as you from the example that image is wide screen, my photo wasn't, so you use the 2nd file to make the photo fit how you want, then save and it then alters the original file, hence smart object. The background too was one, hence the perspective.
The splicing etc is ok , as you say if you have an odd one to do.
So essentially you make up the smart object once and then reuse. As you woudl need to make the canvas / canvas's into several templates for your liking, be it square / portrait / landscape or even spread over several canvases
The example i showed here is an illusion, but a pretty good one, It NOT 3d. Its done with shadows, this is the smart object.
as you see its just a perspective rectangle with the top and bottom left cropped off for the depth.
these are the psd layers as you see there are only 5, its not an action, but googling i did see an action, i think it was $35. But as i said bear in mind the amount of possible boaard canvases you may want.
2 of the other layers as you see are for the lighting and the top one is the 3d illusion effect, this particular one has the canvas effect too. I can't remember where i got this one from. I think graphic river do 3d canvas though, there will be others.
Another thing to consider if using an action is if it can do multiple boards. like ...
again just to show you before the illusion
Pretty much example like the emboss effect you can use, all done with lighting and darkness.
http://graphicriver.net/item/more-canvas-mockups/2581097?ref=riverpsd
http://graphicriver.net/item/canvas-mockups/917210?ref=riverpsd
there will be other avenues if you google

How can i make it? (something like 'Feather effect')

Hi.
I get some object to other design company.
There is AI file in URL(illustrator CS3 version file)
http://www1.datafilehost.com/d/f873f882
it's looks like 'Feather effect'. but it's not.
it's not possible to copy to below Script code.
Sel[i].duplicate(newGroup, ElementPlacement.PLACEATEND);
So i started wonder about it.
How can i make this object?
and, How can i copy this object to script code?
Thanks you.

ohh.. thank you for your reply. But, I found another problem.
Copy is not problem. Real problem is 'translate'.
I want copy and translate to right side.
my source code is :
var aDoc = app.activeDocument;
var Sel = aDoc.selection;
var aLayer = aDoc.layers.add();
var newGroup = aLayer.groupItems.add();
Sel[0].duplicate(newGroup, ElementPlacement.PLACEATEND);
newGroup.translate(10, 0);
this is capture image.
I did run script five times.
Object was translate. but circle was not translate.
And, i upload Appearance palette capture image too.
It's not image. It's Path.
If you Know solution, reply for me please.
thank you pixxxel.

Hy, how can i make filter in numbers, like in excel? can anybody help me?

i am new in mac, and of course in numbers, until now i use exel, and i know to work with it, but now i want to use numbers, so...i want to make a filter like in excel.but i don.t know how.
Thanks.

Hi,
The screen shot didn't really clarify the question for me.
Here's what Jerry was describing, the Reorganization panel, Numbers's equivalent to the 'Denumire' panel shown in your screen shot:
It's currently set to show only rows of the table where the temperature is recorded as between 11 and 13 °C. I've clicked the + button to the right of that condition to add a second, but have not started to build that condition yet.
Regards,
Barry

Can i make iOS 7 look like iOS 6?

Hi, i like iOS 7 but i think iOS 6 looks nicer, is it possibl to make my iOS 7 look like iOS 6?
I am new to iPhone.

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback.

Can you make songs blend together like on ITUNES?

I was wondering if there was a way where you could make songs blend together when you have the ipod in shuffle mode. on I tunes you can select an option where it blends the end of a song and the beginning of the next. but I can't seem to find the feature on the Ipod. Can anyone help?

That feature is for iTunes only. There is a way of blending tracks together in iTunes by using the "join cd tracks" feature in the advanced menu of iTunes when you import the cd. This makes the cd one long tack, but this doesn't work when using shuffle mode.

How can i make my ipad mobile like my iphone?

I purchased my ipad from BestBuy....is there a way I can access the internet at all times? i.e. driving, while at the beach, in an area that has no internet connections. Basically like my iphone?

Your iPhone uses 3G or 4G to access the internet. Unless your iPad is a 3G version you will need a mobile WiFi hotspot for internet access on the beach, or in any area that does not have WiFi access.
There are many mobile hotspots available on the market, but you will also have to purchase a data plan as well.
http://www.google.com/search?client=safari&rls=en&q=Mobile+WiFi+hotspot+devices& ie=UTF-8&oe=UTF-8

How can I make my computer faster like it used to be?

My computer is slow to load everything and slow to switch between programs.

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How can Logic make tracks slow down like an old record slowing down?

If anyone skilled know this, I need to get my entire tracks to " slows down" as a record that just loosing the motor....I have audio tracks and some spectronics /ESX24 also in the set.
I need to make this goes down and efter 1 second to speed up again...
I am working in 48Khz and Logic 9.1.1 and 5.1 sorround.
Maybe I am missing something easy, or maybe it is are harder to get.....
Hopefully a "mastermind" can help me out!
Message was edited by: Host (to clarify subject)

Danke, thank you....!!
I was messing around with flex and felt it was not really obvious to make it there.....
I will do this!
Thanks for helping me out here!

How can I make a smart form like this one ?

hi
according to my business requirements I need to create a PDF form which contains a table with variable number of rows (containing numbers) , so the user should be able to add or remove rows to the table as much as he needs to , and there should be a row showing the total at the bottom of that table.
I'm absolutely sure that this is possible to be implemented in PDF using javascript but I need some help to do it.
I saw a working example - the same concept I required.
>> you could have a look here -
http://www.windjack.com/PDFSamples/ListPrograming_Part1_XFAForm.pdf
any idea how I can do so ?
thank you.

hi George
thank you for helping.
I thought about the same idea >> to add fields and hide them and then show them one by one upon to user reuest , but I think that will solve just a part of the problem regarding the functionality ,,, while the formatting issue won't be solved ,,, I mean look at the form I linked to ,,, the table borders and final appearance remains the same even after adding a new row.
is it possible to do so if I used AcroForm and hide the fields ?
and how will I get the total of those variable number of rows after user finished adding rows ?
regarding the other thing you mentioned (pushing items down as new rows are added) ,,, I think I can avoid this by adding the table in a separate page ,,, because according to my business requirements ,,, rows that will be added won't exceed 30 maximum.
thank you for your time.

How can I make Preview behave more like it used to?

I use Preview a LOT for doing things like annotating screenshots for IT helpdesk stuff.
In 10.9 it was invaluable; but the version in 10.10 seems to be a bad step backwards. I used to be able to select a tool, like text, a line, or oval, for example, and it would stick, and let me draw the item where I wanted it to go, like an actual graphics program.
Now I have to reselect the tool each time, and it plops some default shape in the middle of the image that I then have to drag and resize to suit my needs. Needless to say this is making my task annoyingly repetitive and longer than necessary. The preferences are useless. Any hints or secrets to m,making Preview a useful graphics tool again?

I use Preview a LOT for doing things like annotating screenshots for IT helpdesk stuff.
In 10.9 it was invaluable; but the version in 10.10 seems to be a bad step backwards. I used to be able to select a tool, like text, a line, or oval, for example, and it would stick, and let me draw the item where I wanted it to go, like an actual graphics program.
Now I have to reselect the tool each time, and it plops some default shape in the middle of the image that I then have to drag and resize to suit my needs. Needless to say this is making my task annoyingly repetitive and longer than necessary. The preferences are useless. Any hints or secrets to m,making Preview a useful graphics tool again?

Can i make the keyboard keys like play and pause work on my computer with iTunes

I have an m11x with windows 7

Check this thread out -> iTunes 10.4 & Multimedia Keyboard
It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
pikot wrote:
Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
- You need to open a text editor (like notepad) as an administrator.
- Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
- Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
- Save the file
- Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

Can Illustrator make a photo look like it is underwater?

I am looking for a way to make a photo look as though it had been printed on cloth and submerged in water, dimensional, wavy. I have no idea where to begin.
All help gratefully accepted.

Try the Photoshop forum. One floor up, then second left.

Can i make subcircuit in multisim like subvi in labview?

Similar Messages

Maybe you are looking for