Can I make wrapped pictures move relative to text?

I really like the controls Pages gives about how images are treated in the document text (text wrapped around, text above/below, etc.)
But, I run into a problem when I add text above the image, and it moves the text that was related to the embedded image. So, I have to re-align all the images to match up to the text again. That process is usually repeated quite a few times.
As the document becomes larger, the implications of inserting any text become even more severe.
I'm sure there is a good way to handle this, but I have not been able to figure it out.
Can I somehow attach the image to the point in the text where I place it, and have it move with the text?
Or, do others make heavy use of page breaks to partition sections of the document?
Any other suggestions?

Todd,
Using the Wrap Inspector, you can specify your object to be Inline or Floating. The terms may be somewhat difficult to grasp at first, but you will soon see the difference. If the text flows around your object when you add text above the object, and the object stays in the same position relative to the page, your object is Floating. If your object moves with the text, flowing downstream with it, your object is Inline.
Try both and see how they differ.
Jerry
Message was edited by: Jerrold Green1
Message was edited by: Jerrold Green1

Similar Messages

  • How can I make the Counter move from inside text box to inside Footer?

    I am tweaking a page. At this point, I cannot move the Counter and the Email Me icon from the bottom of the text box to inside the footer like someone here said he does.
    Why do the Counter and the Email Me icon resist being moved?
    I am in Graphics mode. I never had this problem before.
    — Lorna in Southern California

    Lorna,
    I'm not sure why you can't move it down into the
    footer — by inside the text box, do you mean the page
    "content" or "body" section, or did you somehow get
    the icons into a text box? I know that you can
    "force" a text box into the footer (or header) by
    selecting it, then dragging it while holding the
    command (Apple) key down at the same time.
    Hope this helps.
    Bob
    Bob,
    When I say Text box maybe I am not using the right word. I am referring to that entire space on the page which is dedicated to receiving documents or images. If you have a lot of pictures or words, then that text box/space has to be lengthened to accomodate.
    I am saying that the two icons -- Counter and Email Me -- are sitting (or were sitting. It's morning now and honestly, I can't recall from last night!) at the very bottom of the text box/space.
    I made a Footer (55 pixels) specially to accomodate the Counter and Email icons. The problem, as stated, was/is that those icons would not budge from where they were sitting.
    — Lorna in Southern California

  • Can I make a Picture-In-Picture movie with iMovie?

    Can you make a picture-in-picture using imovie? If so, how do I do it? If not, what program would I need to accomplish this task? Thanks for the help!

    I don't know whether this can be done in iMovie 08, but having been on an Apple one to one tutorial this morning, I can say 100% that picture-in-picture is easily achievable in Final Cut Express 4, only because we broached on this subject and the tutor showed me how easily it could be done.

  • How can i make a picture from a video file with final cut pro x?

    how can i make a picture from a video file with final cut pro x?

    Go to the "share" menu, select "save current frame"

  • Can not make a picture but no white line in pdf

    Can not make a picture but no white line in pdf

    There are many threads on same topic, please follow the suggestion mentioned here :
    https://forums.adobe.com/message/6486790#6486790
    Thanks,
    Sanjit

  • With the new iOS7 how can I make the picture on my lock screen smaller or is this a glitch with the new iOS7?

    With the new iOS7 how can I make the picture on my lock screen smaller or is this a glitch with the new iOS7?
    I got the 5s and everytime I try and change the picture on my lock screen the picture is 10x way to big. I try and resize it and make it smaller but it will nto get smaller.
    How can I fix this?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • How can I make multiple pictures slowly fade to white in FCP X ?

    I am new to FCP X and I'm creating a picture slideshow.  How can I make multiple pictures slowly fade to white in FCP X ?
    For example, I would like to have 10 pictures all play in 5 seconds, and starting off with the 1st one being little light; 2nd lighter; 3rd lightter; etc., to 10th being completly white screen...
    Can anyone help ?

    Here is what I would do. Add a 5 second white generator solid to your storyline. Add your 10 half second clips as attached clips. Select them all, right click and make a compound clip. Then keyframe the compound clips opacity from 100% t0 0% with one keyframe at the beginning and one at the end. That will give you a linear reduction in opacity over the 5 seconds(10 pics). You can play with the keyframes to get the effect you want if linear isn't doing it.

  • How can I make from 1 movie 2 movies

    How can I in Imovie 10 make from 1 movie 2 movies.
    I would like to split the movie into two movies including all the foto and audio .

    One way is to select all the clips in the timeline that you want to be in one of the movies and copy them. Open a new project and paste into the timeline. Go back to the original project and delete the selected clips. Then share the two projects.

  • Can I make 16:9 Movie from DV footage shoot in 4:3

    Hi I am new to FCP and have been asked to make a movie and put it onto DVD for a friend of film shoot at their wedding. The DV footage was shoot in 4:3, can I make a 16:9 project in FCP and import the 4:3 footage and edit it ok?
    Thanks,
    Nick

    You can create a 16:9 project, but you'll have to expand the clip to fill it, or crop the top and bottom, then zoom it up - as it wasn't shot in widescreen, you will lose some image somewhere - and it wont show you anymore when its played back anyway.

  • Grapher: can I make a quicktime movie for a parameter animation of a 3D graph?

    In Grapher, I can't seem to make a quicktime movie of a parameter animation for 3D graphs.
    For example:
    Make a new 3d graph.
    Add the equation x^2+y^2+z^2-k=0
    Add another equation k = 1, and Animate Parameter on it, set the range from 0 to 6, and play the animation to see a growing green sphere.
    Click the movie button to create a quick time movie.
    I get a movie of one frame of the animation repeated many times. I.e. the parameter animation does not appear in the quicktime movie.
    Should this be possible?

    Bonjour,
    There is a very old bug in Grapher : 
              Bug nr. 16 (Grapher 1.1, 2.0, 2.1, 2.2 and 2.3). In 3D windows, menu Equation > Create Animation : the various parameter, zoom and frame animations from the pop-up window “Animation“ do not work.
                        The remedy : No idea.
                        Proposed correction : restore these animations.
    Using Grapher 2.1 in OS X 10.6.8, to animate a sphere (cartesian coordinates) :
    — in a new 3D window (use a new window for any change you wish), enter these equations
      k = 1  and   sqrt(x^2 + y^2 + z^2) = k ;
    — click  the parameter  k=1 ;
    — Menu Equation > Animate Parameter > Settings : Min Value 1, Max Value 6, Steps 11. OK ;
    — Try the animation : Play then Pause ;
    — Click Create Movie, try it ;
    — Menu File > Save as… (.mov) to get a QuickTime Movie… working well.
      Remember : any change you want to do NEEDS A NEW WINDOW ; if not, animations can’t no more be created and saved.
    I tried today  Grapher 2.3 on a Mac Book Pro (Dec 2010) OS X 10.7.5: The bug is worse, no more animations available in 3D and two icons desappeared from the animation panel (places remain clickable). Sorry for you !
    How is it in Mountain Lion (it’s still Grapher 2.3) ?
    YB24
    PS. A list of Grapher’s bugs is a chapter of « Instructions for Use - Grapher » on website
    http://y.barois.free.fr/grapher/

  • I have a regular usb mouse and it isn't working. It sometimes clicks, but it can't make the cursor move. The red light will not turn on.

    I have been using a mouse with my MacBook Pro for a very very long time now:
    Optical USB Mouse:
      Product ID:    0xc016
      Vendor ID:    0x046d  (Logitech Inc.)
      Version:     3.40
      Speed:    Up to 1.5 Mb/sec
      Manufacturer:    Logitech
      Location ID:    0x06200000 / 3
      Current Available (mA):    500
      Current Required (mA):    100
    I'm running OS 10.6.8 on a MacBookPro that is fairly old.
    The mouse is detected on the USB port, either one, but the red light won't light anymore so I can't use it to move the cursor. I've tried rebooting, I've tried the cammand-option.P.R thing. Still no red light.
    Help?

    Mouse Gas?
    I took both of them to work and both worked fine in a different Mac laptop. I brought home two other mice and they both work here in my home computer. That works, but I wish I knew why the first two don't work at home because the logitec mouse I bought for home has very light action and the center wheel needs only a very light touch. I really really liked it and can't find one like it to replace it with.

  • How can I make Norton automatically move junk mail to a separate folder

    In my old Outlook Express email program, my Norton AntiSpam filter created a separate local folder and automatically put identified spam into it so it did not clog my inbox. How can I make Thunderbird allow Norton to do this?

    It seems Norton has not modified its toolbar or other features to work in Thunderbird. I found this thread encouraging Symantec to add Thunderbird, but it's very quiet:
    http://community.norton.com/t5/Product-Suggestions/Norton-support-for-Thunderbird/td-p/216120
    Thunderbird does have some spam filtering features (I only started using it recently, so mine is still in training...).

  • How can I make a WMV movie in Compressor?

    Hi guys,
    How can I make a WMV moive for window media player in Compressor?
    Anyone please,
    Thanks in advance,
    Zia

    Zia:
    The player component is free but lets you just play WMV files, not encode.
    Check the difference between option in this page:
    http://www.flip4mac.com/wmv_compare.htm
      Alberto

  • How can I make the tab image instead of text.

    Hi guys,
    How can I make a tab displayed as image instead of text?
    Best Wishes,
    Fateh

    Thanks Jari,
    I use Apex 4.0.2 and the theme is Builder Blue 2. When I click edit tab, I get "Tab Label" that is required field and a region called "images". As I got from you, I cannot utilize images in my case.
    Regards,
    Fateh

  • I have a data connection but I can't make or receive phone calls or texts

    I have a 3G data connection on my iPhone 5 at home, but I can't make or receive phone calls or messages.. I can surf the Internet though. I talked to a sprint representative and we went over everything and couldn't figure it out. Can some one plz help with this issue???

    Phone and messages is a carrier issue. Sprint needs to check your account to make sure it is set up correctly. If everything looks good on their end, then do a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, try it.

Maybe you are looking for