Can I manage my parents MB from my computer using ARD. Even though they are on different networks
Can I manage my parents MB from my computer using ARD. Even though they are on different networks?>
When you say a diffrent network, do you mean accessing the computer over the internet?
VNC is built into the computer, so you don't need ARD to remote into a computer. To access your parents computer over the internet will most likely require configuring their router/firewall. And unless they're paying for a static ip, you'll also need some way to track their computer.
OR
you can use logmein, or teamviewer. Both programs are desgined to access a computer over the internet. Most of the time they don't require re-configuring the firewall.
Similar Messages
-
Can apple replace my 32g 3gs which is broken (under warranty) even though they are no longer sold??
since they are not being sold any more can i still get a replacment??
I also have a 32G 3GS (also under warranty), and it was having issues with the side volume on/off key and with 3G reception. I took it to the Apple Store, and I got a new version of the same model. It might have been refurbished -- don't know. But it's new to me. Though the side volume on/off key works just fine now, I'm still having some 3G access issues. But I just read some possible solutions for that in these forums and will try those next.
-
I have just set up icloud and all my contacts are duplicated from Address Book! My new iPhone is also showing duplicate contacts even though they are not duplicated in my address book on my computer. Please can you help?
Also, what are the source of your contacts? are they created on the phone, or you synced from yahoo/hotmail etc.
If thats the case, the circular arrow wont be visible but instead show "groups"
Contacts from different accounts are not synced to iCloud. -
I only get sound from the computer's speakers even though I put in headphones
I have for a while now had the problem that I only get sound from the computer's speakers even though i plug in the headphones, I have rebooted the computer but still the same problem occurs. So i thought there might be someting wrong in the settings, when i open the soundsettings and plug in my headphones nothing happens, usually I believe there should be a text appearing that says that the sound is now going to headphones, am I right? any how, it still just sends the sound out to the speakers and there is no option to send it else where then "soundflower 2ch and soundflower 16ch".
I do have an external sound card, for music recording, that goes through USB, and when i plug that in i get the option to send the sound to that device and also to recive sound and i can also choose if i want to sent it to the computer's speakers. So could it be someting wrong with the headphone jack?Good day!
Thank you for writing to the Dell Community Forum.
Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
Have a great day ahead. -
I am unable to transfer my songs from my ipad to my iPhone even though they are both registered to the same apple Id
How are you trying to accomplish this? You can't transfer media directly from one iDevice to another. You should be transferring your purchased items to your iTunes library on the computer you sync them with, then syncing them from there.
You should be able to re-download media from the iTunes store using the same Apple ID used to purchase it to begin with. -
Someone who receives my mail sent from Apple Mail cannot receive attachments or read my email even though they are on a Mac using Safari. How could they be using Safari to receive or read my mail?
You can lead a horse to water, but you cannot make it drink. This person receiving my email, while on a Mac with Safari is reading their mail through Safari using Horde--our recent discovery. Why they chose to do that in unclear. The last email we sent, however, was miraculously read and received and the attachment was viewed with no problem after we told them our mail was coming from a Mac thriugh Apple Mail. It seems that telling them that our emails were coming from a Mac and using Apple Mail was enough to make them think that perhaps THEY were doing something not quite right. Thank you both, Level 7 and Level 5.
But thank you especially for the meteorologists in the UK for putting forth the correct routes for Sandy these last days, you probably saved a lot of lives. -
my iPhone 5 has someone in Contacts that is not on my iPad or Mac even though they are all connected to my iCloud account how can I re-sycronise them?
Hello Mr Potatohead,
Thank you for the details of the issue you are experiencing with your iCloud Contacts. I recommend reviewing the sections titled "General troubleshooting," "Troubleshooting with iOS devices," and "Troubleshooting iCloud Contacts in Contacts on OS X Mountain Lion or later (or Address Book on OS X Lion)" in the following article for the issue you described:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You
I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.
-
i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
i am having problems with my ipod syncing all of my videos to my ipod from my itunes playlist, it will only sync about half even though they are all checked
I assume there is more than ample space remaining on your iPod to hold all the videos? Are you getting any error messages during the sync process?
Do all of these videos play okay in iTunes? Is the sync only checked songs and videos option enabled from under the iPod's Summary tab?
What other setting do you have enabled from under the iPod's video configuration tab in iTunes?
B-rock -
Get rid of the newsstand app or put parental controls on it. Apple is being irresponsible. I want my kids to be able to read books with their iPod but not be exposed to ****.Even though they can't download it I don't want them to search or browse on **** topics.
If you've set parental controls up for the app store then you've done all you can to prevent your children from finding/viewing content you dont want them to see in newsstand. Here is some information about newsstand:
Newsstand is a folder that organizes your subscription apps. While it does appear in Recent Apps like an app, you cannot place Newsstand in another folder.
Each publication is a standalone app. For additional assistance or information for that publication, refer to the app's built-in help or App Store listing.
Newsstand-compatible apps automatically move to Newsstand. Tap and hold apps to arrange them in Newsstand.
Note: You cannot drag other publications into Newsstand.
If a subscription app or publication does not appear in Newsstand, verify that the app supports the Newsstand feature.
So all the parental controls you've placed on the app store are effectively placed on newsstand. -
i just upgraded my pc to windows 7 and itunes to 10.4.1, but i can't see the menu items at the top left of itunes. they are there, because if i move my mouse over the area where they should be, i see and can select from the drop down menus. this problem also affects my music library; i cannot see the individual song names/artists/etc, but if i double click on the blank line it does play the song. the app library and video library seem OK, only the music library is a problem. also, when i connect my iphone, it recognizes it, but the main screen for my device has no words on it, just a picture of the phone.
Hi, Sanjiv - My son fixed this problem for me by showing me that in addition to the visible volume slider at the top left of the iTunes window you also need to pull down the blue airplay menu right alongside that volume slider (the little blue box with the triangle). When you pull down that menu you will see volume settings for "computer" which controls the built-in speakers, plus a list of the other external speakers you may have set up using Airport. When I did that I saw that the volume on "computer" was right down at zero levl even though the main iTunes slider was at full level. When I selected the "computer" under "single" or "multiple" options and adjusted the volume it came back up. It worked for me, I hope it solves your issue too. Best, John.
-
Can I use my data from iPhone onto iPad if they are with different networks?
Is it possible to use my iPhone data on my iPad if they are both with different networks? Thanks
You don't have to be connected to the same network in order to transfer files – your devices automatically set up a direct wireless connection for AirDrop.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support -
Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1. 1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2. 2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2. 2. A data reviewer (who approves journals)
The process is as follows:
1. 1. Logon as Data inputter to submit the journals
2. 2. Logon as Data reviewer to approve the journals
3. 3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M.Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1. 1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2. 2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2. 2. A data reviewer (who approves journals)
The process is as follows:
1. 1. Logon as Data inputter to submit the journals
2. 2. Logon as Data reviewer to approve the journals
3. 3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M. -
I have moved music from old computer to new one through externaI drive. They are in the proper folder for Itunes to find them (I did authorize the new computer) but they do not appear in the list when I call up nItunes. I did try to import them through the add fule to library, but it only seems to work one siong at a time. I want to add rhem all at one time.
Was the ENTIRE iTunes folder copied, just the iTunes Media, or just the media files themselves?
If properly moved, there should be no issue.
Assuming the ENTIRE iTunes folder was moved:
Close iTunes.
Hold SHIFT and launch iTunes. Continue holding SHIFT until the locate or create a new library option is presented.
Point iTunes to the correct location for the iTunesLibrary.itl file, this will be the folder that was copied from the old computer.
Everything in iTunes on the new coputer should be exactly as it was on the old computer.
Maybe you are looking for
-
Making a backup of my mac os x so complicated?
Ok, this is getting ridiculous. For years I make copies if files and folders and save them to my external hard drive. Easy, uncomplicated, simple. Now I want to use super duper and am finding this horrendous. The following text in their pdf seems utt
-
I've created a pivot table in which I have two columns listed in the Pivot Table Prompts area (formerly known as the pages area in 10g). When editing the pivot table, the Layout section shows a summation icon beside the words Pivot Table Prompts. I'v
-
How to use CS4 to control my photo scanner?
How do I use CS4 to scan slides or pics using my new Epson photo scanner?
-
Cannot load or view or take photos
hey all, normally these forums have answers to my issues but i cant seem to find one, so my apologies if this is a double-up on another thread i have an iphone 3GS and i recently updated it to the ios5 software, no issues there however now its been a
-
I have an error when join pc's to domain windows server 2012 r2
Hello everyone I have a problem to join computers to the domain. I'm doing the procedure is as follows. 1.'ll properties pc 2. I click Change to join the domain. 3. I request the domain administrator credentials 4. I get the window that has joined th