Can I manipulate update rate of the NI-PCI-5411?

Hallo everyone,
How can I change the update rate of the NI-5411 AWG card ?
Thank you for your replies.
Kind Regards,
rainbow27

If the module is currently generating, call niFgen Abort Generation.vi (niFgen_AbortGeneration) to stop generation.
The sample rate is then set with niFgen Set Sample Rate.vi (niFgen_ConfigureSampleRate).
(Re)Start waveform generation with niFgen Initiate Generation.vi (niFgen_InitiateGeneration).
Jerry

Similar Messages

I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I have a backup from about 4-5 months ago avaiable. Can I add/update contacts from the back up rather than restore which i assume will literally delete any new contacts added...?

I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I recently sold my macbook air and also my mac book pro, so have no recent backups avaiable. I have a backup from about 4-5 months ago available on an external hdd as a time machine backup. Can I add/update contacts from the back up rather than restore? The reason i wish to do this is because in the update i didnt lose any messages, so all of the people i have met and networked with since that last update those many months ago, i have in my messages listings. They are all unidentified numbers at present but over time i will be able to work through the messages and based on the conversation recall who each was with. Also, yesterday, some two weeks after the update had left my contacts list entirely empty... a vast majority just reappeard, though all of them are without any phone numbers, all just emails or facebook contacts. This is the work of facebook not mac/ios6 isnt it...? Any help here would be greatly apprecaited. I am about 2 days from flying to canada and having those contacts would make life a lot easier.

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html

HT1338 The application can't be updated due to the presence of Mac Osx 10.7.5. I updated the software of my mac to the latest update and still the application can't be updated. I'm using Mac osx lion (10.7.4)!?

The application can't be updated due to the presence of Mac Osx 10.7.5. I updated the software of my mac to the latest update and still the application can't be updated. I'm using Mac osx lion (10.7.4)!?
Regards,
Mhareky

OS X Lion Update 10.7.5 (Client Combo).

I have not updated my iPhone 4 since the IOS 5.1 update. Can I now update it with the latest software even though I am missing other updates?

I have not updated my iPhone 4 since the IOS 5.1 update. Can I now update it with the latest software even though I am missing other updates?

When going to your software updates on your device it will provide you with the latest available update for your device.
the iPhone 4 will update to iOS 7.0.4 provided all other updates the device is asking for has been completed.
Good luck friend.

Can my client update photos without the Muse program?

Hi i have seen this asked before but without any clear answer. My client wants a site made but he wants to be able to update images on the site, like adding more, adding text and deleting and updating images. Just wondering if this is possible to do without haveing the Muse programe. Can he make these changes from the business catalyst manage site? or will he have to have the program?
Any insight into this greatly appreciated, thank you.

At this time, sharing the Muse file while your client has Muse program too is the only way around this otherwise one can alter the code directly which we do NOT recommend as manual changes made to the published site will not reflect in the Muse project file stored locally. However, this is something being worked upon by Muse engineering for future releases. Please refer to the following thread here - http://forums.adobe.com/message/5198212
Thanks,
Vinayak

G530 / XP. Playing projects in 44100 Hz makes problem. Can't set sample rate of the sound cart

Hi, I have already instal Sonar on my new Lenovo...
And what i see.... In the soundCart (conexant HD smartAudio 221) no 44100 Hz!
And i can't find something that looks like place to change it.
How can i do this?
PS: XP.
Thanx

The red line indicates the audio must be rendered. This may be caused by several things but your playback settings may be set too high for your system to handle. You may have too many audio tracks for your computer to play in realtime.
Select one of the audio files in the timeline, get properties, not the audio format and sampling rate.
Now got to Sequence>Settings and determine if the settings match your audio settings.
Your online help system can guide you through adjusting your system settings, user settings and sequence settings.
bogiesan

If i restore my ipod on a newer version of itunes on another computer, can i still update it on the older version on my computer?

I can't connect to the internet on my computer and i need to restore my ipod so i was going to restore it on another computer, but wasn't sure whether i'd still be able to update it on my computer because I don't want to have to transfer all my music to the other computer?

If necessary,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Since upgrading I can no longer update software from the apps store.

Since upgrading to Mountain Lion the apps store keeps telling me that I have software to update. It starts doing it then fails. Its done this about three times now.
Any suggestions?
Thanks
Chris

Wipe the drive and reinstall Lion.

HT201071 How can Apple NOT update compatibility for the Nikon D4S??

Man, this is such a let down. I'm working with this camera every day and it's such a pain to have to either convert to DNG or shoot JPEG. C'mon Apple...

You should let them know here:
http://www.apple.com/feedback/
I did that for my Canon and 2 months later, there was an update for RAW support.
FWIW, the D4 is on the list (and so is a D3s, so it should definitely help to submit feedback)

Why can't I update apps at the app store?

I cannot connect to the iTunes store and update my apps. I dont know why. I have an ipod touch 5th gen and IOS 7. Also two of my apps just disappeared from my home screen. Dont know what is happening.

Do you have automatic updates turned on? That is new for iOS 7. If yo d you may see that some apps need updates but that goes away after the automatic update prcess finished. The iPod periodically checkds for updates and periodically updates apps.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

If I purchase the Ipad2 Wifi in Australia can i still update it in the uk?

Hi,
I am looking to purchase the 16gb wifi Ipad 2 whilst in Australia. In about 9 months when I return home to the UK will it work ok? Will I still be able to receive updates etc?
Thanks!

You will, but be advised of the following:
1. If you set it up on a computer with iTunes in Australia and you sync to that compyuter, you'll need the same computer and iTunes account when you come back to the UK.
2. The App Store in Australia and the UK are different. You'll need a credit card registered in Australia in order to download and buy apps from the Australian App Store.
3. When you go to the UK. some of the apps you purchased in Australia may not be available in the UK. And, you'll need to have a credit card registered in the UK, in order to purchase and download Apps in the UK.
4. iPads sold in the US are not carrier locked. But I don't know if that is true in Australia, so before you purchase one, make sure you are not getting one that is carrier locked.
5. If you buy a 3G model, it would be best to buy the GSM (requiring a Micro Sim) model as opposed to the CDMA model, unless you know in advance that CDMA service is available in the UK.
It's late and my mind is beat. There may be other things you should consider, but this is a good beginning.

I am working with the NI PCI-5411 AWG in arbitrary mode. How change the duty cycle of the square wave output located at the Sync connector by software?

We use Labview 7.0 and NI fgen 2.1 in order to drive the pci card.Can you send me a VI example?

Hi LtDel,
To achieve this you will need to insert an niFgen property node from the niFgen functions palette into your code flow somewhere in amongst the configuration vi steps. Wire up the reference and error inputs and outputs. Left click on the "property" and select >>output attributes>>sync duty cycle high. Right click and set to "write" then wire in a control or constant defining the % duty cycle for the high phase.
Hope this helps,
Nick

PWM Update Rate using PXI 7334 & 6602 cards

I have a NI 8176 controller and a PXI 7334 (FlexMotion) Motion Controller Card. I am using the PWM output to control an actuator and I would like to update the duty-cycle as frequently as possible.
I have the card PWM frequency set to 32 kHz, but can only achieve 1.5 kHz update rate.
The attached VI shows the code I'm using to write to the card.
I also have a PXI 6602 card, I can achieve an update rate of 6.5 kHz with that, but I bought the 7334 card with the expectation of achieving a faster update rate.
Any advice on how to improve the update rate of either card would be appreciated. Likewise, does anyone know another hardware set-up that would be a viable alternative?
Many thanks,
Brian
Attachments:
pwm_generation_with_7334_card_-_tick_method_of_speed_measurement.vi ‏50 KB
PWM_Benchmark_V1.1.vi ‏112 KB

Hi Amaury, thanks for the fp2 file, I’ve just moved site, got my lab back yesterday. (please watch the numbers 7344 and 7334 in the text below!)
The FPGA2 firmware I had was Version 5.20.0001, MAX would not allow me to select the file 7344pwm.fp2, I got the message “This file is not valid for the Flexmotion board selected”.
However, I went to C:\Program Files\National Instruments\Motion\FlexMotion\bin and deleted 7344.fp2
I then renamed 7344pwm.fp2 to 7344.fp2 and copied it to the “bin” folder, then in MAX I selected new file to download, pointed to 7344.fp2 and successfully download the new firmware to my 7334 motion controller. Now in MAX the FPGA2 firmware version is 5.20.000f.
Unfortunately I c
an still only update the PWM duty-cycle on my 7334 at 3.6 kHz!
Is this correct? do I need to update the file 7334.fp2 instead? or does the file 7344pwm.fp2 also work for the 7334 card?
Also, is it possible to generate a PWM using the stepper motor output in open-loop mode? If so, do you have example code on how this is done?
Thanks again for your help,
Brian
Regards
Ray Farmer

How to generate a waveform (with changeable update rate and sample) with USB 6008

Apologize about my awful English.
In Tradition DAQ I can set different update rate with "AO Start" vi.
Transform into USB-6008 device things turn into quite different.
I don't know which vi I can setup update rate.
Is there any example for this.
THX a lot!

Hello D.
To use the USB-6008, you need to download DAQmx Base driver from the web at http://digital.ni.com/softlib.nsf/websearch/CE3686A8D5B0CEDC86256FFD007C9C4A?opendocument&node=132070_US .
The driver will install with example programs that you can access by going to Start->Pograms->National Instruments->DAQmxBase->Examples. You new to have LabVIEW 7.x to use this driver.
SergesL

Can I manipulate update rate of the NI-PCI-5411?

Similar Messages

Maybe you are looking for