Can i manual feed to print a label

Do I have to load labels into the paper tray or is there a way to manually feed a single sheet?

It is always recommend to load labels one sheet at a time. Also, it is advisable to run a test page first to make sure that you have the page loaded correctly. I would advise running the test page on regular page then overlaying that on your labels.
As to where you will load the labels, this depends on the type of printer you have.  For most printer models, you will load your labels into the paper tray, however some models, esepcially laserjets, have a priority feed tray where the labels are feed into the printer.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

  • Can I use Contacts to print address labels?

    Can I use Contacts to print an address book and/or labels?

    Yes.
    See the topic "Print contact information" in Contact's Help.
    Regards,
    Barry

  • Can I use Page to print address labels

    I switched to a mac and used to print labels for my homeade wine using print shop or word. I used avery self-adhesive lables and printed 8 of the same label on each page. Can Page be set up to do the same thing?

    If you did that in a Word document try opening it in Pages.
    Peter

  • Can only print with manual feed and NOT from the paper tray from websites

    When I try to print something from a website, I must manually feed the paper in the manual feed slot. It will not print from the tray. This problem does not happen when I print something from an email with no downloads or something from MSword or Excel. So, it's most likely a browser printer setting issue. Any ideas?
    Thanks

    Probably related to printer preferences and how they relate to Firefox. If you did the complete reset all the printer setting that Firefox would saved would have been cleared and gone back to the default settings. Without familiarity with that specific printer ''(or even knowing which printer you are using)'' the best advice I can offer is to seek help from a support forum for that brand printer, or for you to reinstall the printer software to get back to the defaults.

  • How to turn off Manual Feed envelope prompt on printer scrn LaserJet Pro 200 Color MFP M276?

    Somehow, in trying to figure out how to get an envelope to print from the feeder tray (which I found out isn't possible), I turned on something that produces a printer screen prompt that says something like 'Manual Feed" then says the size of envelope and waits for response.  This is every time I print an envelope & it's really a pain and I'm not finding where/how to turn this off.  Can anyone help?  Thanks in advance.

    Hello miebs, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having envelope issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Also, What programs are you printing from?  Does it occur from multiple programs?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Can Pages Print Mailing Labels?

    I have a number of clients that currently use mail merge on their PC's in Office 2003 to print mailing labels. Their biggest issue has been getting this to work painless, as theres always some sort of file compatibility issue or what they see on the screen is not what they get in print form.
    Can Pages do a 'mail merge' or similar to print mailing labels easily? Is there any way to print mailing labels from an address book stored on the Mac? If so do you need to manually enter label sizes or is there a list of compatible brand labels (such as Avery) like Word has?
    A few of my clients would consider switching over to a Mac if daily tasks like this were more painless then using Office on a PC. You would think after all these years someone would be able to make this simpler.
    PowerMac G3   Mac OS X (10.4.8)  

    Welcome to Apple Discussions
    Pages 2 can do mail merge using data in Address Book, but it appears to be intended to use in form letters & envelopes & prints one record per page not for printing a page of labels.
    But, there is no need to use Pages for the labels. Address Book in Tiger will print labels directly. There are several printing options in the Print dialog - labels, envelopes, lists or pocket address book.

  • CP 2025 Duplex Printing Requires Manual Feed

    Just got this printer and when I print double sided, it flashes yellow and requires me to feed a sheet of paper into the manual feed, which ends up being a cover page. Page 2 of the document is placed on a second sheet of paper and the remaining pages print fine. Very irritating to have to feed a sheet for each print job.
    Please help,

    ToniE wrote:
    HP again, may-be this time with their great Buddy in war Mircosoft.... Installed windows 7 prof (32bit) and then installed the c7280 as a network printer (like one does that in Microsoft).... BIGGG SURPRISE... printer found, workx.  EXCEPT: to make sure that as of Windows 7 and further nobody can complain about pop-ups which say that you can't duplex and if you say print anyway it works, this driver has just taken "automatic" out of the selections of duplexing!!!
    A simple solution:  go to the printers folder, right click on the C7280, Printer Properties, Device Settings and set the duplex unit to "installed", OK.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Officejet 8610 print manual feed?

    I often have to print the back of a single sheet and it's a pain pulling out the tray to load one piece of paper. This was a cinch on a printer that had a vertical tray on the back. Is there no manual feed on the 8610???

    Hello @Slycat!
    Thank you for posting on the HP Forums today!
    From what I gather by your question, you are printing on the back side of a single document, but does the document already have print on the other side?
    If so then yes you will have to pull out the try and put that document print side up.  The printer only has an input try for printing on the front of the machine and does not have a top feeder designed for printing.  You will have to pull out the try to put in a single page manually.
    If your document has no print on the other side then you can use the two sided printing option within the HP software. Please follow the document for Printing on Both Sides of the Paper (Duplexing) for HP Officejet Pro 8610 e-All-in-One Printer Serie.... 
    I hope i was able to provide some help regarding your concern. please post back and let me know how it goes!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • I have an officejet pro 8500a. i want to know if i can print on labels.

    I have an Officejet pro 8500A.  I want to know if I can print on labels.
    This question was solved.
    View Solution.

    HI Geoffery,
    Yes your printer is able to print labels. 
    Here is the link to your manual talking about the details on printing labels. Take a look at page 162.
    Hope this is helpful.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • I just updated my Ipad 2 last night with iOS 7.04 now I can't print shipping labels from Paypal. I downloaded a different browser, Dolphin, per Paypal's suggestion. Still can not print. It says it has lost connection with the server.help!.

    Hello! I updated my Ipad now I can not print USPS labels from Paypal. I used my boss' Ipad not updated and worked fine. I am dependent on my Ipad to print these labels for me. I can print anything else I want, like email or packing slips. Any thoughts? I would go back to the previous version if anyone knows how to do that.

    Hello Sapo11,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How can I print address labels from numbers spread sheet

    How can I print address labels from numbers spread sheet

    CAB,
    The 5163 template has the following dimensional specs:
    Dimensions & Info
    Length: 4.00000"          Height: 2.00000"
    Top Margin: 0.50000"          Bottom Margin: 0.50000"
    Left Margin: 0.18000"          Right Margin: 0.18000"
    Hor. Spacing (gutter): 0.14000"          Vert. Spacing (gutter): 0.00000"
    Intended Use: Mailing Labels, Shipping Labels, Address Labels
    There's a great vendor site with this data readily available, better than the Avery site in my opinion. But, you can get the same info in the Contacts Print dialog pane.
    You can grab a template matching these dimensions from that vendor site, Copy the table after opening the Word Template in Pages and drop the into a blank Numbers Sheet.
    I found that Sheet side margins of 0.15" worked better than 0.18. For some reason the table wanted to flow to the next page to the right with 0.18". Turning off the Headers and Footers and setting Top and Bottom Margins to 0.5" worked well. These adjustments are made in the Sheets Inspector.
    So, that will put the template you specified into a Numbers document and you can print labels properly aligned from there. Since your problem statement is a bit lacking in detail, that's all I can offer you at this point.
    Jerry

  • Print a document with mixed Legal/Lett​er paper with 1 tray and manual feed

    I have an HP Laserjet Pro MFP M521 with one paper tray. I need to print a document that has a mix of legal and letter size pages. Is there a way to set it up using the one tray and the manual feed so that it will print correctly?

    hello, please don't open new questions for the same topic, but keep all your answers in your original thread at [https://support.mozilla.org/questions/985876]! this will make it easier for contributors to provide effective help.
    thank you!

  • Label Printing Using Address Book - How can I Print multiple labels of the same name?

    Label Printing Using Address Book - How can I Print multiple labels of the same name?

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

  • LaserJet 4700dn Always prints from Tray 1 (Manual Feed)

    I have a networked LaserJet 4700dn in a lab environment that recently has starting trying to print all jobs on the manual feed Tray 1.  I cannot find a way to reset this to use Tray 2 as the default tray.  I have checked all the OSD settings and used the web interface to attempt to rectify this.  I have installed the latest firmware and driver package on my test computer with no luck. I have read threads here for different printer models with the same issue but the solutions given are not available for the 4700 printer.
    TIA

    The problem for me was that the paper tray setting slipped back from LTR to A4. Take out the paper tray and make sure the arrow is aligned with LTR.

  • Installed Lion and now can't see or print shipping labels from ebay anymore

    I am a ebay seller and I print several shipping labels every day from the ebay website, everything was ok until I installed Lion OS, now I buy the label but I can't see it nor print it. I spent 2 hours with apple and ebay on the phone and they couldn't solve the problem, I tried firefox and same problem. Please help!!!

    You cannot revert back to iCloud after enabling iCloud Drive on your MacBook Air.  If you want to be able to access your documents on all your Macs you'll have to upgrade the others to Yosemite and enable iCloud Drive on them too.

Maybe you are looking for