Can I merge database of multisim analog device version in multisim?

Can I merge database of multisim analog device version in multisim?
If yes, please tell me how. Thx!
I saw the file named "MSCOMP_S.prd" in the folder:
C:\Program Files\National Instruments\Multisim Analog Devices Edition 10.0\database

Hi Zenith,
The databases between the two products are not compatible and therefore cannot be merged. This database was created specifically for the Analog Devices Edition. Merging two "Master" databases is also not possible since the merge utility will only allow merging two "User" or "Corporate" databases.
Message Edited by M.I. on 12-03-2007 09:34 AM
M.I.
National Instruments
EWB Group.

Similar Messages

How to Add Analog Devices Components to MultiSim v.9

I was wondering if it is possible to add the new Analog Devices component libraries to MultiSim Version 9.1.221 by a drag and drop in windows, or possibly through an import function in MultiSim.
If one were to download the MultiSim Analog Devices version 10.x and already have a licensed professional version of MultiSim 9.1.221 is this possible?

Hi,
It is not possible to import components from a higher version of Multisim into a lower one. You can import older databases into newer version. Take a look at the tutorial below:
http://ae.natinst.com/public.nsf/web/searchinternal/7219964f364425fe862576c1000ba7e1?OpenDocument
Hope this helps.
Regards,
Tayyab R,
National Instruments.

Which is a dual 2-bit bistable transparent latch IC in multisim analog devices edition

I need an equivalent IC for CD74HC75, which is a dual 2-bit transparent latch IC, for a project simulation. Cant find it in the Multisim reference guide.
Any suggestions??
Solved!
Go to Solution.

emind,
Hello, in the Multisim Analog Devices Evaluation Edition, you will find a D_Latch under the TIL family of parts (use 2 with EN tied together for a dual latch) that you can use for generic simulation purposes. If you need a specific latch from a manufacturer or specific logic family that might be challenging (we have a few in the PRO version or you can add some external circuitry to the TIL part to mimic the behavior of a particular logic family).
The TIL parts (generic digital I/O) are located here: Misc Digital (group) -> TIL -> D_LATCH.
I created a simple interactive circuit with a probe so you can observe the behavior to see if it will meet your simulation needs.
Regards,
Pat Noonan
National Instruments
Attachments:
bistable latch (ADI_edition).ms11 ‏36 KB

When installing Analog Devices Multisim: invalid win32 application

Hi,
I'm trying to install Analog Devices' version of Multisim, however when I do it instantly responds with a "is not a valid win32 application" error message. Any ideas on how to fix?
Cheers,
Phil
Solved!
Go to Solution.

I haven't heard of this error before, so some extra information would be helpful.
What version of Windows XP are you running? Do you have Service Pack 2 or Service Pack 3?
When is this error happening? Is this happening when you run the installer or when you run Multisim?
Last, when this type of error occurs, Windows usually logs some additional information about the error that can be helpful in diagnosing the problem.
1. Open the Control Panel
2. Double click on Administrative Tools. Then double click on Event Viewer.
3. On the left, there are several items. Look select these and look for any Errors at the same Date and Time you tried to start the program (there will be a lot of unrelated items but they are in order with the most recent at the top). For each Error that has the same Date and Time
Double click on the item.
Copy and paste the Description into your reply.
Garret
Senior Software Developer
National Instruments
Circuit Design Community and Blog
If someone helped you, let them know. Mark as solved or give a kudo.

Analog Devices Edition: Current feedback amplifier models not working

Hi, I'm using the Analog Devices version of Multisim and have problems simulating their current feedback amplifers. For example, I want to use the AD8000 as an inverting transimpedance amplifier, basically run a current into the inverting input, ground the non-inverting input, and chose the feedback resistor to be the transimpedance. I want to make sure that I can use feedback resistors between 100 and 2000 Ohms to convert negative current pulses to positive voltage pulses, but I can't get anything to work, even with the recommended feedback resistor values. With a current input I get negative rail saturation, while with a voltage input I get a step output.
Thank you.
Attachments:
AnalogInputCFA.ms10 ‏106 KB

Hi there,
I think I figured out why your circuit isn't working. It has to do with the treatment of the dedicated feedback output pin that exists on your amplifier. While this pin and the main output pin both exist on the physical package and are electrically connected, this isn't the case in Multisim. The feedback pin in Multisim exists on the schematic only, it doesn't actually have any simulation functionality. So, as a workaround, I suggest that you connect the feedback path to the output pin instead of the dedicated feedback pin. You would never do this in real life, but for simulation, it will work fine.
Thanks for pointing this out. We will look into this problem and have it fixed in the future.
Yi
Software Developer
National Instruments - Electronics Workbench Group

Analog Devices model update for AD version

Downloaded 'ADI_All_MultiSim_Symbols.zip' from AD website. How do I get them into multisim analog device edition?
Solved!
Go to Solution.

I have MSim-Analog Device edition only. Can someone database merge, or if you already have it, try to extract a SPICE netlist and post for the ADM4073? I've attached the .prz file from Analog Devices.
Thanks
Attachments:
ADM4073TWRJZ-REEL7.prz ‏296 KB

Drivers for Analog Devices RTI-815

Hi,
Does anyone know where I can find Labview drivers for an Analog
Devices RTI-815 card, if they exist?
The card came out of a Haake Rheocord System 90. The old
controller for it is a 286; we'd like to replace it with a newer computer
and software written in Labview. Thanks for your help.
-Nathan

Hi, thanks for the responses. I did a search on the 815 and 802, but I must admit, I neglected to search the forums for the AC28. All 3 cards are still available (although AD has discontinued their cards UEI manufactures replacement units) The company I work for has these cards in several test rigs, and I'm looking at options of modernising the PC & control software without incurring the cost of a complete control system retrofit (the current control software is DOS based). In view of performance & accuracy it probably makes sense to upgrade the cards and signal conditioning, but In the short term that would be a difficult proposition.
We also have other test machines which use labview, AD 5B signal conditioning, and Siemens profi connected I/O. Ideally if we were to look at a complete retro I would be keen to commonise as much equipment as possible. However, while the current hardware remains available, and performs adequately It will be quite difficult to justify.
SSK: Also, I would be interested in the code that was you utilised, if you could dig it up that would be a great starting point.
Mark: Thanks also for your post. I'll look into the driver kit, and most likely ask NI if they would consider writing some drivers at some stage.
Some links:
AC28:       http://www.opto22.com/site/pr_details.aspx?item=AC28&qs=100110021006,,,0,6
RTI-815:   http://www.ueidaq.com/products/pci-data-acquisition/uei-800/uei-815-32/
                 http://www.ueidaq.com/products/pci-data-acquisition/uei-800/uei-815/
RTI-802: http://www.ueidaq.com/products/pci-data-acquisition/uei-isa-ao/uei-802-8/

How can I export database incremental?

I want export database for backup.
how can i export database incremental?

What Oracle version are you using ?
The following is from 8.1.7 documentation about INCTYPE parameter :
Incremental, Cumulative, and Complete Exports
Important: Incremental, cumulative, and complete Exports are obsolete features that will be phased out in a subsequent release. You should begin now to migrate to Oracle's Backup and Recovery Manager for database backups.

How do I add Analog Devices symbols and footprints to component database?

Hi,
Analog Devices conveniently has a library of their component symbols and footprints for Ultiboard and Multisim. How can I add these to the library?
Is it a drag and drop thing? If so what is the folder location?
If I go thru the available database interface it doesn't allow for selecting footprints outside of the existing library and adding them.
In ultiboard I can open the footprints, but 'save to database' is not an option available.
thanks
Ryan

I am not sure which file you downloaded, but I downloaded the Ultiboard Zip file (the small 3KB one). Each footprint is an individual footprint and apparently must be added manually to the database in Ultiboard.
How to do this? In Ultiboard, Extact them to a location on your drive and double click the footprint and it will load onto the screen like a normal board would. Now you have to goto DATABASE>DATABASE MANAGER. Once there you right click on USER DATABASE and add a family like say TRANSITORS. Then highlight your new family by clicking on it. Then goto the very top of the and you will see a little yellow "+" . click that and it will give you the option to add a new part from the current design to the user database. That is all you need. The footprint will be in the user database.
The next step is to assign it to the component in Multisim and you will have to refer to a turtorial on the NI Site in order to do this. I will post a link to it once I find it.
I do not know about the other file. Most of the time there are .PRZ files that the only thing you have to do is to go into the database manager of Multisim and select the user database. This will give you the option to do an import. If your files are a .PRZ file then you will be able to import using this option.
I hope some of this helps a little
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

I have 2 Apple ids and two corresponding iCloud accounts. My five Apple devices are linked to one or the other. As one consequence a small number of my contacts are associated with one iCloud account, the majority with the other. How can I merge?

For reasons not entirely clear to me I have ended up with two Apple ids, two iCloud accounts and my Apple devices being associated with one or the other iCloud account/Apple id. One of the complications is that my contacts are partially owned by one iCloud account, partially by the other.
Is there any way to
- merge the contacts (I have tried exporting from one and importing into the other but one set will overwrite the other)?
- migrate all devices to one single iCloud account without being locked out for 3 months?
- merge Apple ids or just delete one of them without locking out devices?
Grateful for any suggestions because this is turning into a headache.

You can merge the contacts from one account with your other one without overwriting them. Sign into the first account, download them as vCard (iCloud: Export contact information as a vCard), email them to a device signed into the account you want to merge them with, tap the vCard and choose Add..., then Create New Contacts.
You can also migrate a copy of the data in one account and merge it with the other by signing into the account you are leaving, then signing out (or deleting the account if not running iOS 8), then choosing Keep on My iDevice when prompted. Then sign into the other account and choose Merge when prompted. This won't move Notes however. If you are syncing notes that you want to migrate from the other account, you can temporarily add the account to your Mac as a secondary account by going to System Preferences>Internet Accounts (or Mail,Contacts,Calendars)>Add Account>iCloud and signing in with the other account ID. Then enable notes syncing in the secondary account. You will then be able to open the notes app and drag and drop notes from one account to the other. When you're done, delete the secondary account from your Mac.
You can't merge IDs as Apple does not allow it. Also, you won't be locked out of anything for 3 months. The "90-day switch" rule only applies to changing your iTunes store account, not your iCloud account. Just leave your iTunes store account as-is. The ID you use for the iTunes store does not have to be the same as the ID you use for iCloud.

Can you merge two user accounts on macbook? my wife has created a user on her new macbook , then inadvertently created a second one when using the migration tool. 1st ac has her office 365 install, yet 2nd has her itunes database, docs and contacts.

Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?

There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files. Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User.

Trouble activating Multisim component evaluator Analog Devices Edition Version

I downloaded Multisim component evaluator Analog Devices Edition Version
13.0.. I’m having the same problem that I had last time I downloaded something
from NI. (Unactivated license). I think this is because of the tight security
where I work. The solution last time (after a lot of time and back and forth
emailing was to send me the activation code and I typed it in manually. (I
pasted that email below).
Thanks,
Brian
Brian Healey – Electrical Engineer – ISR Systems
UTC AEROSPACE SYSTEMS
7 Technology Park Drive, Westford, MA 01886 U.S.A.
Tel: +1 978 490 2148 Mobile: +1 978 846 5918
[email protected] www.utcaerospacesystems.com
From: [email protected] [mailto:[email protected]]
Sent: Friday, May 24, 2013 1:47 PM
To: Healey, Brian W UTAS
Subject: RE: [External] Re: (Reference#2014565) Phone Support E-Mail
Note: Your reference number is included in the subject field of this message.
It is very important not to remove or modify this reference number, or your
message may be returned to you.
Hi,
Open the License Manager again and try to activate Multisim, but this time
select the option to activate through a 20 - characer code.
Activation Code:
BS9P-HW36-4Z8Y-DJWM-C9N4
Let me know if this works.
Kind regards,
Miguel Vesco
Applications Engineer
National Instruments
http://www.ni.com/support

Hi Brian,
Since you have a new version the software needs to be reactivated with a new Activation Code. I will send you an email via our support system for further details.
Regards,
Fernando D.
National Instruments

If I have several different apple email accounts, how can I merge them under one email so that I can use it on multiple devices?

If I have several different apple email accounts, how can I merge them under one email so that I can use it on multiple devices?

BuckeyeNative wrote:
how can I merge them under one email ...
you can't.
... so that I can use it on multiple devices?
a single iTunes can be authorized for up to five iTunes store accounts (Apple IDs). a library thusly set up will sync content purchased with any of the five Apple IDs to any device.

Can we merge data from multiple sources in Hyperion Interactive Reporting ?

Hi Experts,
Can we merge data from multiple sources in Hyperion Interactive Reporting ?Example can we have a report based on DB2
Oracle,
Informix and Multidiemnsional Databases like DB2,MSOLAP,ESSBASE?
Thanks,
V

Yes, Each have their own Query and have some common dimension for the Results Sections to be joined together in a final query.
look in help for Creating Local Joins

I think i may have two iCloud accounts how can i merge them?

I think i may have two iCloud accounts as i changed my apple id, I don't seem to be able to access the other. How can i see my documents in the cloud

Hello HVD64
I'm afraid there is no way too merge two icloud accounts together per se. However if you;
1. Go to SETTINGS on your iPhone or iPad.
2. Go to iCLOUD.
3. Scroll to the very bottom, press DELETE ACCOUNT. Before you panic, this is not going to Delete your iCloud account. It is simply going to delete the bridge that connects your device to the iCloud.
4. Choose to KEEP ITEMS ON YOUR DEVICE if asked.
Then sign into your 2nd account, and this will merge both accounts onto one device. There is not much else you can do I'm afraid!
Kind regards
Edward
<Edited by Host>

Can I merge database of multisim analog device version in multisim?

Similar Messages

Maybe you are looking for