Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Is the HDD in the 2009 15" MBP dead?  (The original source of your data)  If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it.  It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

Similar Messages

  • My itunes won't start up when I plug my phone in. I followed a solution but when I got to opening my itunes helper it says"the application I tunes helperis not open anymore" and I'm stuck here. Any help out there?

    I'm

    AND ALSO I TOTALLY UNINSTALLED ANY OF MY
    ANTIVIRIS THINGYS AND THE SPYWARE STUFF.I D/K WHAT TO
    DO ANYMORE!
    *~PLEZ HELP ME!~*
    Hi yesy
    If you are sure you disabled your AV/antispy and you get the flash of a licence it sounds like you may have a malware infection. Look out for posts by b noir and get hold of ewido - its a free AV programme - google and you should find.
    BTW, you may be in Florida and I'm in the UK, but don't shout - you're just next door in cyberspace!:) I understand your frustration coz I've been in your place. There are some really helpful folks on this forum - seek, and you shall find!
    Local retailer custom built pc. Pentium 4 chip 2.4GHz Windows XP SP2 20Gb iPod
    Local retailer custom built pc. Pentium 4 chip 2.4GHz   Windows XP   SP2 20Gb iPod

  • ReminderFox 1.9.9.5 Add On will not download to my Mozilla Browser 9.0.1 any help out there?

    download does not start after many install requests.........[email protected]

    Pretty much the ipod is going to need to be repair. I would suggest taking it into the nearest Apple Store because they give you a 10% discount for older ipods towards a new ipod.

  • I move folders from my internal hard drive twice to an external hard drive.  Now I believe Lr does not know how to find my photos.  What can I do to get this cleared up.

    I move folders from my internal hard drive twice to an external hard drive.  Now I believe Lr does not know how to find my photos.  What can I do to get this cleared up. 

    Jim has a very good suggestion. There are many factors at work here:
    1) How are you connecting the external drive to the computer?
    2) How big are files (329 x 1MB is not the same as 329 x 25MB)?
    3) What is your computer specification?
    4) Do you have any power saving settings on (in particular something that would send the computer/hard drives to sleep)?

  • My iPhone 4s refuses to make alert sounds for one contact.  All other text messages from other individuals, including iMessage, all make appropriate alert sounds.  Very frustrating.  Any help out there?

    My iPhone 4s refuses to make alert sounds for messages for one particular contact of mine.  All other text messages come through with appropriate alert sounds.  Any help out there?

    As always seems to happen, the next thing you try ends up working. Well almost. I
    Deleted the contact and sent a message from that phone to mine -- problem persisted
    Deleted the person from my FAVORITES in the phone app (the entry still existed even though the contact had been deleted). This worked!!!
    It's kind of weird that the favorites in the phone app were somehow affecting notifications in Messages for a contact that had been deleted, but there you are.

  • The https URL hostname does not match the Common Name (CN) on the server.

    Hi,
    I am getting the following error while trying to use https with our self-signed certificates.
    javax.xml.ws.soap.SOAPFaultException: Marshalling Error: The https URL hostname does not match the Common Name (CN) on the server certificate. To disable this check (NOT recommended for production) set the CXF client TLS configuration property "disableCNCheck" to true.
    The above error is the error I get, when I try to use the Web Services using https.
    I have added the following lines in cxf.xml but it still doesn't seem to work correctly.
    <http-conf:conduit name="*.http-conduit">
    <!-- deactivate HTTPS url hostname verification (localhost, etc)
    WARNING ! disableCNcheck=true should NOT be used in production -->
    <http-conf:tlsClientParameters disableCNCheck="true" />
    Kindly let me know on what would be the issue here?.

    I had P2V'd a SQL 2008 server and was having this issue.  I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
    Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM.  After searching
    for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from.  Finally it hit me, maybe it's stored in the master or msdb datatbases.  
    SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine.  All services started
    OK on the virtual machine now and affinity was set the way I needed it.

  • I can't open my imovie '9 projects on my new lap top which uses imovie 11'.. previous lap top was mac book osx 10.5.8.. new one is mac book pro 10.6.6.. any help out there! i'm pretty useless at this stuff, might be really simple???

    which uses imovie 11'.. previous lap top was mac book osx 10.5.8.. new one is mac book pro 10.6.6.. any help out there! i'm pretty useless at this stuff, might be really simple???

    Thanks for nothing, as usual, Apple.
    I had to redo the whole project from scratch on Windows Movie Maker.
    Now I know which brand to trust on my next purchase.

  • Software does not find the Database server

    Hi all,
    We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server.
    I checked everything as from the link described:
    http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx?Redirected=true
    Also at the new server we have another production DB that is running without any issues...
    System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
    host has failed to respond 195.30.95.163:80
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
       at System.Net.HttpWebRequest.GetRequestStream()
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at OptoWare.OrderEntry.OrderInterfaces.WebReferenceOWEdix.OWEdixService.OWEdix_GetStatus(String custID, String password, String countryCode)
       at OptoWare.OrderEntry.OrderInterfaces.EdixInterface.b(Object A_0, DoWorkEventArgs A_1)
    2014-03-31 16:54:58,924 [1] ERROR OptoWare.OrderEntry.Controls.Config.ServiceControl - Connetction to FI1-sv-prod014\mssqlserver failed.
    System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
    to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
       at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at OptoWare.OrderEntry.Controls.Config.ServiceControl.i()

    It looks like the connection is getting refused because of your application configuration.
    Refer similar thread 
    http://forums.asp.net/t/1180127.aspx?A+connection+attempt+failed+because+the+connected+party+did+not+properly+respond+after+a+period+of+time+or+established+connection+failed+because+connected+host+has+failed+to+respond+
    -Prashanth

  • HT1925 I can't uninstalled itunes.  I get the message  (itunes64.msi missing)  any help out there??

    I can't uninstalled itunes.  I get the message  (itunes64.msi missing)  any help out there??

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • My laptop has crashed and I can't sync my iPad air. I have tried to back up off I cloud but it hasn't transferred all of my photos or music. Is there anyway I can access my iTunes account any other way?

    My laptop has crashed and I can't sync my iPad air. I have tried to back up off I cloud but it hasn't transferred all of my photos or music. Is there anyway I can access my iTunes account any other way?

    Your iTunes account won't include your non-iTunes purchased e.g. music copied from CDs etc, nor photos that were synced from a computer.
    To get non-iTunes music you will have to go via a computer. If you don't have that music on, for example, an external drive, then there are some programs listed half-way down this page which should be able to copy them back from a device : https://discussions.apple.com/docs/DOC-3991
    For photos that were originally synced from a computer then there are apps such as Simple Transfer which can copy them between devices and/or to a computer (though photos are 'optimised' as part of the syncing process, so if you do copy them back to a computer then they might not be the same as they were on your laptop).
    There is also this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141

  • My email seems frozen. Hasn't worked for 2 days now. Any help out there?

    My email has been frozen for two days now. Any help out there? The little thing just keeps spinning and spinning.

    It's searching for new mail and can't connect to the server apparently,
    Quit the mail app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Try mail again.
    Or you can try this as well. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • My I messages are being sent from my Hotmail account, I have tried to re-activate my I messages but I keep getting "ac"

        My I messages are being sent from my Hotmail account, I have tried to re-activate my I messages but I keep getting "activation unsuccessful"

    This is selected at Settings > Messages > Send & Receive > Start new conversations from:
    If your Hotmail account is available under your can be reached by iMessage at and someone with a Mac or iOS device has your Hotmail email address available with your contact info in their address book, they can initiate an iMessage addressed to your Hotmail account.
    http://support.apple.com/kb/ts4268

  • On my iphone 4, when i try to open an app, the icons start wiggling like i want to delete them. the touch screen does not always work. sometimes the phone reboots itself. any help out there?

    on my iphone 4, when i try to open an app, the icons start wiggling like i want to delete them. the touch screen does not always work. sometimes the phone reboots itself. any help out there?

    Have you tried basics from the manual?
    restart,
    reset,
    restore
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • Trying to create a new movie.  It tells me to name my movie, and the only event choice is the last movie I made.  I don't want it there.  I'm lost and I'm just starting.  Not sure I like the new version.  Any help out there?

    I'm trying to create a new movie.  It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting.  Not sure I like the new version.  Any help out there?

    peggy818 wrote:
    … I'm lost and I'm just starting.  Not sure I like the new version.  …
    have a read in the Manual:
    http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21

  • HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

Maybe you are looking for

  • Programming for College with Windows Apps on bootcamp HELP?

    Hello everyone I come to you for help after a long search for the perfect laptop. Right now I am using a macbook late 2009 with multitouch. I love the features but after signing up for some programming classes for college I had to revise what laptop

  • Why has my apple tv forgotten my purchases after the upgrade?

    I have had to re-enter all account and wireless details too, but the thing that really doesn't work is that it has no history of my purchases. Any ideas anyone?

  • Pur requisition Characteristics

    Hi Guys For creating a Purchase Reqn Characteristic(CT04) I have two choices for field selection which one should I use and what is the significance of each field. I presume one is for item wise value release and the other is for entire document valu

  • About careful update,system maintaning and dangerous packages to hold

    -I want to know about which packages you usually prevent from updating?And how to do it? -With what command i can delete everything the package i have installed?Including config files. -Upgrading often is more convenient way for ArchLinux? -If you re

  • Customer exit to modify long text icon

    Hi to all. as you already know, I'm trying to make a program to modify the icon long text in reference to the number of digits in the long text. I have found the enhancement SEUMP001 with function exit EXIT_SAPLSMPE_002, I have created the include ZX