Can I modify a power point presentation on the keynote and send it back as a power point? Will a PC be able to open it?

Can I modify a power point presentation that was sent to me on my keynote (OS X version 10.9.4, processor 2.6 GHz Intel Core i5, memory 8GB 1600 MHz DDR3), and send the presentation back after the modification as a power point? Will a PC be able to open it and work with without any problem? How should I do it? Also, there are some videos that do not play, what should I do?
Thanks for the help.

Can I modify a power point presentation
Keynote will open, edit and save PowerPoint files.
In Keynote use:    File > Open, then select the PowerPoint file.
Once edited save it by:   press the Option key then,    File > Save As
PowerPoint file will open if the user has either PowerPoint or PowerPoint Viewer installed on the Windows computer.
Also, there are some videos that do not play, what should I do?
If they are Windows Media files they would have to be converted to play on a Mac.

Similar Messages

  • When I try to read my e-mail my iPad closes the page and sends me back to home page. What can I do to fix this?

    When I try to read my e-mail my iPad closes the page and sends me back to home page. Any ideas how I can fix this?

    Jonmarie-
    Try resetting (rebooting) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything and sometimes solves mysterious problems.
    Fred

  • Tho bl Email in iPhone to the Reserve email and i can not Reception any email he go to the email and send i can see my emails in the Hotmail website what i can do

    Tho bl Email in iPhone to the Reserve email and i can not Reception any email he go to the email and send i can see my emails in the Hotmail website what i can do i need my email in my iphone i try to go apple>support>apple id>name and email> and i can not i using iPhone 4s in 6.0

    Try contacting Support in your country, after confirming your id and that it's your account they should be able to reset its password.
    Contacting Apple about account security : http://support.apple.com/en-us/HT5699
    If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
    When they've done that update the primary email address on the account to be an account that you have access to e.g. by tapping on it in Settings > iTunes & App Store and logging into it, via the Store > View Account menu option on your computer's iTunes, or via the 'manage your apple id' button on http://appleid.apple.com

  • I want to edit tunes from my violin lessons so I can play along without constantly having to stop the playing and re-set back to the beginning.  How do I do that?  Am I asking the correct group? Thanks for your help!

    My violin teacher records tunes for me to practice at home.  I download the recording onto iTunes.  I want to replay the same tune over and over again without having to stop every single time to manually re-set and re-start the same tune.  It would be better if I could edit out some of the verbal instructions if possible.
    I can't even figure out how to replay any single tune over and over again.  I apologize if I chose the wrong group.  If so maybe someone could steer me in the right direction.
    Thank you so much for your help.
    Barbie5

    If you have further queries along these lines the best place would be in the iTunes Forum.

  • In Address Book, how can i modify several contacts (several cards) at the s

    Hello,
    In Address Book, how can i modify several contacts (several cards) at the same time ?
    for exemple : I have 100 contact which live in Paris, I select all of them together, but when I put "Paris" in the field "city", it puts "Paris" only in the fisrt contact !
    how to edit several contact at a time ?
    And I would like to put some kind of "tags", or words, in "remark", also by selecting several contact and edit them together...
    Thanks by advance !
    Alexandre.

    Welcome to the discussions, Alexandre1975 et bonjour.
    Just using Address Book this can't be done, but if you are prepared to try a little Applescript it is easy. This script will set the city for example - but only if there is already an address.
    AK
    click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "Address Book"
    set ContactList to the selection
    repeat with ThisOne in ContactList
    set city of first address of ThisOne to "Paris"
    end repeat
    end tell</pre>
    (The recent upgrade to the discussions has disabled the link that allows direct opening of a script, so run Script Editor and copy in the script.)
    Message was edited by: Austin Kinsella1

  • TS1702 I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

    I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

    Sorry I'm so late responding; I've been away.
    http://support.apple.com/kb/TS3694#error1611
    The error means that your antivirus or firewall is blocking the update process.

  • I am doing a lot of presenting with the ipad and want an app that would bullseye or show where I am to my audience. Anyone know of something like this?

    I am doing a lot of presenting with the ipad and want an app that would bullseye or show where I am to my audience. Anyone know of something like this?

    It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
    http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
    http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009

  • Can I fix a disk with this message?-Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Can I fix a disk with this message?
    Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Some problems can indeed be fixed this way. But working from Recovery_HD or Disk Warrior DVDs and working in the restricted environment those provide can be difficult. You can literally spend days working on this problem (while your regular work is unavailable) only to discover the old drive is unsalvageable.
    There is no way to know up front whether you are facing a major Hardware failure or a minor software glitch, or something in between. Often you are forced to work from the drive you no longer trust. I continue to recommend you do this work from a different, fully functioning Mac OS X booted from a different drive.
    If you have had the foresight to (as The hatter often recommends) clone your virgin install onto another drive for use in such situations, you will be able to recover from such problems in record time. If not, my previous recommendations stands:
    Buy a new Drive. Or  two. Install Mac OS X from scratch on a new drive, and get your Mac running again. Later, you can use the full power of Mac OS X to attempt to rescue your data, if needed. Then Zero the old drive, to see if it can hold data again reliably.
    If the old drive eventually provides some needed data, and is salvageable, Merry Christmas.

  • Device object not present,restart the system and run setup again????

    i install window xp sp2 in my macbook,when i  install driver by mac os cd,installation run until sigmatel,it show error,the my mbp will restart automatically,and the driver installion not complete!! i try to install sigmatel idt sound driver manually,when system update the hardware configuration,it show an error  message
    " device object not present,restart the system and run setup again"!!!!  so i can not fully install bootcamp driver in window!
    any can help??
    macbook pro 13" 2010 mid

    Hi:
    Your notebook is not supported by HP for Windows XP.
    Please read the XP downgrade guide at the link below for instructions on how to get your audio to work in XP.
    http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
    The specific instructions for your model series can be found in the section titled  3. Difficult Models
    Paul

  • I'm having problems with my email account. I receive emails when I'm in a wifi zone.  But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network.  Only when I power off the phone and turn it back on, do I re

    I'm having problems with my email account. I receive emails when I'm in a wifi zone.  But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network.  Only when I power off the phone and turn it back on, do I receive the emails through the cellualr network (again with the wifi off)

    In your email settings on the phone check to make sure it is set to receive emails on cellular network.  It's a feature you can turn off so your phone isn't constantly updating emails on the cell network, but if you are usually in a place with wifi and aren't concerned about going over your data allowance, you can turn it back on. 

  • Is it possible to make a slideshow or presentation without the fading (and horizontal l and vertical) so no transition at all?

    Is it possible to make a slideshow or presentation without the fading (and horizontal l and vertical) so no transition at all?
    (I would like my dog to 'run' more smoothly across the webpage in a very quick slideshow)

    Hi,
    You can set the transition to any of the three options available (fade, vertical and horizontal ) and set the transition speed to  "0" . This would remove all sorts of transition effects from your slideshow.
    Please refer to this screenshot :- http://prntscr.com/4rdaqm
    Hope this helps
    Regards,
    Rohit Nair

  • I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

    I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

    If there are fonts, transitions, builds, video or audio in the PowerPoint file that are not compatible with Keynote, it will either prevent the presentation opening or Keynote will substitute the settings causing playback changes.
    I use Open Office to play and open any PowerPoint files sent to me, they play exactly as in PowerPoint.
    Open Office is free, you can download it here:
    Open Office for Mac

  • I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

    I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

    Did you try to connect in recovery mode, as explained in this article?
    If you can't update or restore your iOS device
    If this does not work, get it checked by an Authorized Apple Service Provider or by Apple:
    iPhone - Contact Support - Apple Support

  • HT4914 I often record songs at a particular tempo, iTunes Match will then match it and send it back to me at the original tempo, is there anyway I can stop some songs from being matched. At the moment I have turned match off. But I would like to sync play

    I often record songs at a particular tempo, iTunes Match will then match it and send it back to me at the original tempo, is there anyway I can stop some songs from being matched. At the moment I have turned match off. But I would like to sync playlists.

    How old was this backup? It sounds like it was at least several weeks old.
    You can look directly in the TM backup for the music.
    1. Connect to the external HDD the backup is kept on.
    2. Open a Finder window and select the backup drive in the left hand panel. Double click into the folders until you see a list of folders with dates.
    These are the incremental backups. You can start at the top or the bottom of the list but I suggest you double Latest/<HDD Name>/Users/<Account Name>/Music/iTunes/iTunes Media/Music. From this location you can start looking for the "missing" music. When/if you find it you can simply drag-n-drop to ~/Music/iTunes/iTunes Media/Music on the internal HDD.
    If the music is actually not in the backups (for whatever reason) then you've got a problem.
    You can download the uploaded files from the cloud by deleting the affected tracks from the iTunes library (but not the cloud!), highlighting multiple tracks at once, right-clicking and choosing "download."

  • How can I view my full billing history for the app and music stores without iTunes installed?

    I just received an email receipt from Paypal showing a $12.99 purchase from iTunes. I almost NEVER purchase anything over around five dollars in the app or music store. Since PayPal does not show what this purchase was for, I have not received the receipt from Apple yet, and I cannot find anyway to look up online what this purchase was for....I need help to find out ASAP what this purchase was. If my account has been compromised or if I have been incorrectly charged for something, I would like to get the issue handled immediately. I do not want to install iTunes on my PC (nor should I have to for Pete's sake), but I cannot see anything recent at all in my app or music history on my iPad (not that I would ever purchase anything for $12.99 anyway...I just don't). Thanks in advance for any tips!

    How can I view my full billing history for the app and music stores without iTunes installed?
    No.
    If my account has been compromised
    If you even think this may have happened, immediately change your password.
    See this -> Apple ID: Changing your password

Maybe you are looking for

  • Unwanted line in DW when adding a Flash item...Help!

    Guys/Gals When I try to put a movie item in my Dreamweaver page, an additional line appears underneath - that I do not want. See this page: http://perryautolaval.com/autoaboutfr.php right under the flash banner, a grey lines appears. It should look l

  • How can I open and copy files on the win side from the  mac side?

    I am working on the mac side and I need to be able to copy files from the mac side that I create over to the win side.  I can open and view win files when I am booted to Snow Leopard, but I cant copy files to the win side.  I think Macdrive does the

  • Xquery in oracle 10g

    I loaded one xmlfile into an xmltype column. I need querying in that file and typed select extract(biodata,'/biodata/personalinfo/name') from biodat_info; in sqlplus, and I didn't get any result but the query was successfull. it told that 10 rows sel

  • Need Help Regarding LOAD_TYPE_VERSION_MISMATCH

    Dear gurus While executing T-code vl01n vl02n vl03n im having this error LOAD_TYPE_VERSION_MISMATCH Short text     Change of a Dictionary structure at runtime of a program. What happened?     Runtime error     The current ABAP program "SAPMV50A" had

  • Error importing Javax.xml.parsers.*. what should I do?

    I can not import the javax.xml.parsers.*. could you please let me know what should i do? Thanks