Can I modify the frequency of the Nike+Sport Kit Notifications?

When I set my Nike+Sport kit on the Time setting, it give me an update every 5 minutes. When running for 180 minutes, every 5 minutes tends to be very annoying. Is there a way to modify the notification setting? Say every 30 minutes instead of every 5 minutes?

You might get a better response from folks who use this if you post in the Nike/sport kit forum here.
http://discussions.apple.com/forum.jspa?forumID=1123

Similar Messages

Does 6th Gen iPod Nano need the Nike + Sports Kit?

I have the Nike+ sensor with my Sports Band. To use it with the new 6th Gen Nano, do I have to get the sports kit? Or is this feature built in like the iPhone 3GS and 4? The attachment to the new nano will make the form factor ugly.

Hi toffeepup,
As cocon said, you will need the receiver. Here are some of the references...
Based on the iPod nano Specifications page it looks like you will need the Nike + iPod Sport Kit (with the receiver) for the new nano.
From the bottom of that page, under "Which iPod are you?" it says, "Nike + iPod support".
Compare that to the iPod touch which says, " Nike + iPod support built in".
Also, from Rock and Run
"Then connect the receiver to your iPod nano. iPod touch, iPhone 3GS, and iPhone 4 include built-in support for Nike + iPod, so no receiver is necessary."
Note it does have a built in pedometer, and based on the Features page you can upload that to the Nike+ website. Not sure if that's enough for you.
ivan

Calibrating the Nike+ Sports Kit.

After a couple of tries I think I got it now. The information that gets sent to iTunes and nikeplus.com is right, yet -- on the iPod nano itself window --, although the time and pace are correct (in History), the distance is not.
I'll check this out at the nike site but their discussion groups are not so good.

Hi toffeepup,
As cocon said, you will need the receiver. Here are some of the references...
Based on the iPod nano Specifications page it looks like you will need the Nike + iPod Sport Kit (with the receiver) for the new nano.
From the bottom of that page, under "Which iPod are you?" it says, "Nike + iPod support".
Compare that to the iPod touch which says, " Nike + iPod support built in".
Also, from Rock and Run
"Then connect the receiver to your iPod nano. iPod touch, iPhone 3GS, and iPhone 4 include built-in support for Nike + iPod, so no receiver is necessary."
Note it does have a built in pedometer, and based on the Features page you can upload that to the Nike+ website. Not sure if that's enough for you.
ivan

Will the nike+sport kit work with Iphone 3G

will it work the Iphone 3G?

It would be really nice if the packaging made this a bit more explicit on the front of the box (rather than simply the microprint on the side). What a joke.

Nike sport kit

can you use the nike sport kit with the iPhone 3G?

are they going to make the nike+ sport compatible at all with the 3G? any software upgrade that will make it work? cuz i don't want to buy a new phone!!

Ipod classic and nike sports kit

hi,
can anyone tell me if the ipod classic is compatible with the nike sports kit, importantly if its not why not?
i spent a considerable amount of money purchasing what i thought was a premium product and it would now appear that it will not even support something that a cheaper ipod (nano) will, how can this be so?
cheers

The iPod classic is not compatible with the iPod sport kit, likely because its hard drive is much more vulnerable to being dropped than an iPod nano's flash media.
(26730)

There are now two Nike+ Sport kit discussion forums

Looks like Apple is splitting the Nike+ Sport kit forum into two groups--1st generation and 2nd generation Nanos. Here's the link for the Nike+ Sport kit for the 2nd gen Nano http://discussions.apple.com/forum.jspa?forumID=1132
It is also harder to find these two groups if you are new to the Apple Forums. (I asked some friends who don't use the forums to try this out and they were baffled how to find the two Nike+ Sport Kit discussion forums.)

I suspect it's simply that Apple is dividing up discussions in a way that seems logical to them and then indexing accordingly. So if there are two generations of Nanos, they have two Nike+ Sport kit forums. Simple for Apple. Not so simple for users of the Nike+ Sport kit.
For example, I will soon own both Nanos, so when I have question about the Nike+ kit my question will probably relate to both Nanos and will have to post my question on both forums. When I answer questions, the answers about Nike+ in many cases will be the same on both forums. And when the third generation Nano comes out, same drill, now multiplied 3 times!
So rather than splitting the Nike+ forum to follow the multiple generations of Nanos, it would make more sense for members of the Nike+ Sport Kit discussion forum to have one forum for us that includes all generations of Nanos.

Why no Nike+ sport kit category for 3rd gen nano?

Considering all the problems people (myself included) have been having with the 3rd gen nano and the Nike+ sport kit, does anyone wonder why there is no category for it here (only 1st and 2nd gen)?

It will be coming out soon.

Can you modify the price of a contract in the ME32K directly from the item

Hello,
I am in ECC6.0
I need to modify the price of an item in the contract (ME32K WK or MK) but it is grey (only in display). So I must do Item-Condition and then I can modify the price of the item.
Can you modify the price of a contract in the ME32K directly from the item screen?
I have try with several field selections but nothing.
AKTV     Change
MKK     Quantity contract (for MK)
WKK     Value Contract (for WK)
PT0K     Standard item contract
Cheers,
Marta

HI,
If you maintain any condition in the contract line item condition, like freight, discount etc. the landed price gets populated in the line item price field. So if you want to make any change in base price, it has to be changd in the line item condition.
This is because, You can maintain different validity period in condition and maintain different price in each validity period. So which price you want to pick? So the system captures the price from condition and populate it in the item price field depending on the validity period price.
Hope this helped you.
Regards

Can I modify the column "Net Price" of purchase order to display 3 decimals

Dear expert,
     Can I modify the column "Net Price" of purchase order to display 3 decimals?
     Looking forward to your reply.
     Many thanks.
Best Regards,
Merry

Hi,
You can easily change ur decimal place in OY04 by seeting number of decimal place to ur currency.
But be careful as it cause a huge effect to ur finance documents, read system message carefully before applying.
Regards
ManUfacTuReR

How can we modify the maximum no. of columns in pivot table ?

hi all,
How can we modify the maximum no. of columns in pivot table ?
do i need to change the nqconfig.ini or instanceconfig file or else?
thnx..

A little search on the forum :
In the instanceconfig.xml add a <PivotView> element under <ServerInstance> if one does
not exist already.
Within the <PivotView> element add an entry that looks like:
<MaxCells>nnnnnn</MaxCells>
where nnnnnn is your desired limit for the maximum total number of cells allowed
in a pivot.
Warning: an excessively large number will cause more memory consumption and
slower browser performance.The details here :
Oracle BI EE (10.1.3.2): Maximum total number of cells in Pivot Table excee

How can you modify the displayed columns on a Related Information List?

How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
Thanks

I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
RWB.

How can I modify the logon screen on the portal

Hi,
We have designed some BI queries, when we open Query Designer and execute them (CTRL + R) an Internet Explorer open and ask us to log on this BI Portal.
On this Portal login screen, I can only provide my user name and password.
We would like the user to be able to select the language and to change is password.
How can we enable those changes ?
Thanks,
Hugo

Although in iSQL*Plus 9.0.1 you can't modify the default
login HTML, you can create your own static HTML "login"
page. Just make sure the correct login credential
parameters are passed to the iSQL*Plus URL. Your users will
have to call your new static page instead of the default
iSQL*Plus login page.
Copy the HTML from the default login page and change the
FORM ACTION to include the host and port:
<FORM ACTION="http://host.port/isqlplus" METHOD="post">
and change the "Connection Identifier" field to a drop down
list of the connection identifiers you want:
<TD CLASS="label">Connection Identifier:</TD>
<TD>
<SELECT NAME="sid">
<OPTION SELECTED>SID1</OPTION>
<OPTION>SID2</OPTION>
<OPTION>SID3</OPTION>
</SELECT>
</TD>
Add your own logo, joke of the day, and put it in
production....
iSQL*Plus 9iR2 has an option for a drop down list of connect
identifiers to be configured in the default login screen.
This allows sys admins to restrict the DB servers that can
be accessed. No other connect identifiers can be used, even
from CONNECT commands in scripts.
On the OTN home page there seems to be an "early access"
link for down loading the 9i Database R2.
-- CJ

Can we modify the ME5A standard report

dear gurus
I wnat to include the two columns where i need to fetch the data from P.R , Can we modify the ME5A standard report.
Regards
srinivas

Hi
Pl do n't do any modification the SAP standard report would suggest you to copy the programme and rename & create Z report with addition of two columns as per your requirement which is the best option
Regards

Can't modify the advanced Java setting

I can't modify the advanced Java setting in Windows Vista if the UAC is on. If I disable the UAC the setting can be modified but when I turn the UAC on again return the old setting. This is a big problem because the jre in IE7 results deactivate and I can't open the Java applet infact the browser show the message:
alt="Your browser understands the <APPLET> tag but isn't running the applet, for some reason." Your browser is completely ignoring the <APPLET> tag!
I have installed the latest version: Java Runtime Environment 6 Update 4
Thanks for the support sorry for the bad English.

See http://www.google.com/search?q=java+vista+uac+problem

Can I modify the frequency of the Nike+Sport Kit Notifications?

Similar Messages

Maybe you are looking for