Can i mute, unmute 5 tracks at a time?

I check if i can create folder track but didn't find. I want to mute drum tracks (all audio) with one click, is it possible?

Yes...Put them into a group. Above your fader click in the grey space below the instrument label it will open your group settings do that to all the intstruments you want in that group. Select a group (group 1) then the group pane will open. Label it and there you will see that you can mute all, volume all, record enable,pan, select all for editing if your comping drums and sends etc. Just remember if any of these are checked it will effect every paramater of tracks selected to that group. So if you just want to bring up a snare hit for instance uncheck volume and then just adjust that track. Or you can press option apple sign G to open the group pane. Hope that helps.

Similar Messages

Why can I only record 2 tracks at a time ?

Until a couple of months ago I could record 10 tracks at once without a hitch. Then something happened and suddenly I could only record 4 tracks at a time. Now I can only record 2 tracks at once. My logic is completely legal and I'm running a Mac Book pro 2.4 Ghz core 2 duo, 2 GB.
I posted this same questions a couple of months ago without any reply.
I desperatly need help.
Best regards
Kristjan

Not RAM related.
Record tracks have to be set for individual inputs.
If all your tracks are set to record on inputs 1-2 or Mono 1, Mono 2 you will only have two inputs.
Make sure Universal Track Mode IS selected in Preferences/Audio and that you indeed have the correct audio driver selected. Now go to your tracks and see how many inputs you have available. If you're recording mono tracks set audio tracks 1 and 2 to record using inputs 1 and 2, Audio tracks 3 and 4 to use inputs 3 and 4, stereo tracks will use both inputs.
pancenter-
Tracks have

I have an I phone 4 and since I upgrade to the lastest ios 6.1.3 , my volume slider is missing. The sound works when but I can't mute or turn up or turn down the volume. I've tried a hard reset , reboot, blowing air in the dock and earrplug jack. :-(

I tried almost evrything to restore my volume slider( + & - ). My phone rings, plays music and every other sound but I can't mute or put the volume up r down with the side buttons.. My volume slider bar is missing. This is only simce I upgraded to iso 6.1.3 .. What's with that?? I figured out how to manually mute the phone through (General, Accessibitily) by muting the bell for sound and unmuting the bell for silent mode. But what a freaken pain, when you have to take all those extra steps to turn your volume up or down or mute your Iphone??
We have no Apple Store here so no luck to bring it in to get looked at.. Please , does anyone out there know what else I coold do???
Cheers

Does it work with headphones plugged in? That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.

U330 Mute/Unmute continuous loop

Is anyone experiencing a problem with their laptop going into a continuous mute/unmute loop? The computer mutes and unmutes itself nonstop, and while this is occurring, I lose my touchpad ability to scroll and tap to select. I have tried restarting the computer and reinstalling the drivers for the Realtek Audio Manager and the Synaptics Pointing Device, but to no avail.
Can anyone recommend another avenue to fix this problem?
Thanks in advance!
Solved!
Go to Solution.

I tried restoring by NOVO, but that didn't fix the problem. I spent an hour on the phone with tech support, and they had me reinstall drivers for the audio device and touchpad, none of which fixed the issue with the mute/unmute.
The tech representative and I were not able to locate the hotkey drivers for the U330 on the Lenovo drivers site. Perhaps they aren't released yet?
Tech support couldn't figure it out, so i'll have to send my 2 week old laptop in for repair. This is my first Lenovo laptop, and so far it hasn't been a very pleasant experience.

Can I 'mute' video clips in iphoto

There is a slide beneath each clip which will mute when the clip is playing, but when it is then added to a Ken Burns slideshow the sound reappears. How can I mute the clip without having to take it to iMovie? Many thanks for any help

You've been to great places! Like the slideshows. For your slideshow videos you can add the sound track in iMovie. Render the slideshow in iPhoto to a video file - without background music, and then add the sound track in iMovie. If iPhoto added a soundtrack, use the "Detach Audio" command in iMovie to delete the audio from the clip.
Would you suggest Aperture would suit me! I am willing to give it a go, but I do hate having to learn new programmes, hence my having held off from buying. Really interested in your thoughts.
To use Aperture well, you would have to spend some time exploring the features.
The transition from iPhoto to Aperture is made easy, since both applications can share the photo libraries. You can switch back and forth between both programs and all edits done in one application will be visible in the other.
What you would get with Aperture:
More control when building the Aperture library. You have more views to browse the library; for example you could have more than one album or event open when browsing and can compare albums or events.
More access to metadata. You can display all EXIF and IPTC data with your photos and search for them in smart albums or searches, also create custom tags.
Hierarchical keyword categories. You could define keywords "animal > bird > sparrow", and if you add the keyword sparrow, the image will automatically have the keywords "bird" and "animal" as well.
More control over the RAW development, if you are shooting RAW.
Better timezone handling. You can specify the timezone your camera has been set to, when you import your photos. That is very convenient for long distance travel and moving back and forth between time zones.
More advanced image adjustments. Many adjustments can be brushed in locally. You can lift adjustments from one image and stamp them on others, so all images will be adjusted in the same way.
Referenced images - you can have your Aperture library on one drive, and the original photos on other drives. This is convenient for growing photo libraries, that ill not fit on one drive. Aperture has tools to reconnect missing originals, also you can export partial libraries or merge libraries. When I am traveling, I am starting a new Aperture library on my MacBook Pro, so I can get started with tagging the photos while I still remember, where the photos have been taken, and when I come home, I will merge the new library into my main aperture library.
Most important, if your workflow has repetitive elements, you can define presets for your most frequently used actions and apply them automatically to newly imported images. I think it is a great tool, and do not regret to have switched my main libraries to Aperture, mainly because of the advanced options to keep my libraries organized.

Mute the backing track during auto punch rehearsal

Hi
How do I mute the backing track during auto punch rehearsal?
While I'm rehearsing the punch-in I only want to hear the audio before and after the 'auto punch-in', but not during the punch-in itself - i.e. I want the punch-in region to be silent while I'm rehearsing.
Can you help?
regards
Sambodhi Prem

Hi Sambodhi Prem
You could simply makes two cuts on the audio region you are using as your backing track and press M to mute the middle region.

How can I merge 2 audio tracks without deleting any sections?

I want to merge 2 audio tracks, but when I do that I loose the overlap bit, I want to save everything, just merge them. How do I do that?
Thanks!
Guy
http://www.guybacos.com/

why do you want to merge them?
If it's to apply a common fx chain, then send them to a buss, put fx on the buss, send that to another free audio channel and record it, so that you've effective bounced within Logic. Then mute the original tracks so you can change whatever you need to.
Best
Steve

How do you prevent your phone from locking during voice calls? Mute/unmute features? Are there any? Please help?

Here is the problem - I am often on conference calls. My company, for security reasons requires that I use the lock phone feature. However, I will be on a call, I have muted myself, then the phone locks. I then have to key in my password, and unmute my phone. This prevents me from "jumping in" the conversation appropriately. I either sound like I'm not paying attention or worse, I'm talking over someone else and seem rude. I have tried to search for any of the following features on the iphone 5 c.
Prevent phone from locking during phone calls
Set a button on the phone as mute/unmute
Find a headset that has a mute/unmute feature
I am not the only one at my company struggling with this so I'm thinking others might be too and that there is a solution!
Please help!
Thank you.

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

How can i slide a sound track one frame at a time in Pre 10

i do a lot of music videos where i record audio separtly from the video and then sync them and i have a lot of trouble getting them in sync, does anyone have any good tricks to do this? also, can i move said sound track one frame at a time in either direction to help get these tracks to sync up?
Thanks

If you zoom to the max, and watch that little TimeCode box (it pops up, when you begin dragging), just look at the last two digits, as those are the Frames. Even with my clumsy hands and fingers, I can nail the displacement to Frame-accurate standards.
Now, some other NLE's go a step further, in that when the Clip is Selected, one can nudge it along, with modifier keys and the Left-Right Cursor keys. I do not think that has been added to PrE 10, but would be a great Feature Request.
Good luck,
Hunt
[Edit] Well shut my mouth! After you Select the Clip (unlinking with Alt+click, if muxed), just hold down the Alt key, while hitting the Left-Rigt Cursor keys!!!! Forget that Feature Request.
Message was edited by: Bill Hunt

HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?
Thanks

I tried Notpod but can't get it to work. Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+). I also can't do this in Windows Explorer. Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
The error mesag I get in Notpod is:
"Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit the application will close immediately.
InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
Thanks anyone who can help

HT1391 A friend lost her iphone 4S, but she didnt download find phone, which she thought find phone was already in iphone 4S, during purchased. Now I can't help her to track iPhone & nobody Apple store in Msia, was able to help us.

Dear Apple Customer Support,
Last year A friend purchase a iPhone 4S - 32GB White.
When she purchase iPhone 4S, didnt realised she need to download Find Phone, has she thought it was already in iPhone 4S, system. I approved lots Apple Store in Malaysia, non could help me and all said the same, if you don't download Find Phone, there's no way you can trace it back. No doubt what they all had said is not wrong....but my heart said, am sure there's always a way to track or trace it back even without the Find Phone Apps. Knowing myself don't have such powerful system to find the phone back. Every Poison there's Anti-Dos for it. I know you have the power and system to track & trace the phone back by Apple. If Apple can build such powerful smart phone am sure there's always a way for you there to trace or track it. I had seem movies which even show but not many able to see the hidden message in movie or etc. All my wish was to least Delete or JAM the system by using the serial number or code which you produce in every iPhone 4S or etc. Least the person who took it, would not able to used it at all even if they wannt jail break it or does anything to iPhone 4S. Least they could do is either throw it away or return to Apple Store in individual country. I know what am asking might be impossible to asked, but its the impossible which its not impossible.
1st: Why build a system which so smart with all serial no and codes, but the "Find Phone" its not one of the Apps for iPhone?
2nd: Why must customer need to download "Find Phone" Apps and the rest of the Apple Apps in inside the Phone...? Doesn't make sense....
3rd: In any movie, you watched they will break the phone or throw it away and so they are not able to trace the person but the phone still can be trace or track...unless the person break the chips or put into Fire to destroy it completely, then YES, i believe it can't be trace or track.
Please kindly in your power to help or advice or bring this up to Apple Team Mind before all perfection to make iPhone....Metta
Sincerely,
GQ

Nobody from Apple reads these forum, this is a user to user forum.
Send your feedback to Apple here http://www.apple.com/feedback/

How can I share a guitar track from garageband ipad DIRECTLY with another iPad with garageband?!

How can I share a guitar track from garageband iPad DIRECTLY to another iPad with garageband...it would be so easy to just email the track!!!

Use 3rd party apps to transfer video from one iPad to the other.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/79b3173fda7b6a6e148 5b463198f6acf.jpg

Keynote- Can you add multiple sound tracks to one presentation

Can multiple sound tracks be added to the same presentation? For instance, can I add one sound track to play for slides 1-20 and a second, different sound track to play starting at slide 23 thru 36?

Jonathan:
You can create a single Story from each track and set the End Jump for each Story to the next one. Set the End Jump of the last Story to your menu and assign the first one to your PLAY ALL button.
Give it a try !
Alberto

How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

JoBrooke wrote:
I seem to only be able to view one track at a time.
unfortunately, that is how GB works, it only offers a score for a single track at a time

Can i mute, unmute 5 tracks at a time?

Similar Messages

Maybe you are looking for