Can I Network My Mac With Windows XP Pro With This Setup?

Hey Folks. I have an iBook G4, OSX 10.4.7 and I want to network and or remote access with a Windows XP Pro laptop. In the household, we have DSL with SBC Global. We have a Linksys router. I have an Airport Extreme wifi card, the PC is hooked directly via cable into the Linksys. The router is connected to the DSL modem. Since I get online wirelessly and the PC gets on via the cable and not wireless, can we still do web access hookup, file sharing, remote access? How do we configure both machines to do this? Will we be able to do application/desktop sharing live in real time? Thanks for your insight and help steve
iBook G4 933 640 RAM Mac OS X (10.4.7)

Hi Rick. I want to experiment with networking the Mac to the PC on the internet and in the house. We both have MS Office, so I would assume we can do application sharing, work on the same documents in real time live, the same way that 2 computers play games and such. In other words, I don't want to have to hook an Ethernet cable to the Mac and PC to network together. Want to do it via the net. I did download the Remote Access Windows app from Mactopia today. Ready for the sophisticated methods now, (I think, hah)
Although it has gotten much easier to network Macs to PC's since Panther and Tiger, getting the configuration and hookups to work together perfectly is another challenge. It's tricky and frustrating when you seem to have put it all together, and then BANG!, it doesn't work. sigh I have tried the Ethernet connection method and that took forever to get that working, but it finally did ok. Also in the Sharing window under System Prefs, there are a lot of options to tweak as well.
I'll check out the link you recommended. Keep ya posted. Thanks steve
iBook G4 933 640 RAM Mac OS X (10.4.7)

Similar Messages

ITunes compatibility problems with Windows 8 Pro with Media Center

I get this message on my screen:
iTunes.exe has been set to run in compatibility mode for an older version of Windows. For best results, turn off compatibility mode for iTunes before you open it.
When I open my iTunes the only music I can see is that which I downloaded from iTunes; the other music I have which I have physically loaded via CD, although on my PC and playable through Media Center is unobtainable through my iTunes home window.
Can anybody help me fathom this out?

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Usually, a computer can appear to hang (stop responding) in the situations of insufficient system resources, high CPU usage, high disk usage, deadlock in kernel mode or key system processes, or hardware problem.
You can check if this hang issue usually hangs when high load, that may points to a resource issue, enable perfmon log to located which process caused that.
Regarding to the deadloack issue, based on my experience, most of these issues caused by the outdated driver, refer to the following action plans:
==========
1. upgrade all the hardware driver, firmware, BIOS.
2. upgrade the AV software.
3. Run disk check, if there is build-in hardware health Diagnostics Utility, also run it.
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/b735884b-5afb-4405-ae90-64c29...
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Can manually subscribe with Windows but not with Mac

For some reason I am able to manually subscribe to the below feed just fine with iTunes on my PC (Windows XP) but I get an error when trying with my iMac (OS X 10.5.8):
*http://feeds.feedburner.com/Metalspeak*
The error I'm getting with my iMac references "An unknown error occured (400)"
I was troubleshooting a different feed and am getting similar results: it works fine with the PC, but not with the iMac:
*http://feeds.feedburner.com/MetalsPeakPodcast*
The error I'm getting on this feed however states "The file might be corrupted, or a file type that iTunes cannot play"
Can anyone think of why these feeds work with Windows but not with Mac? Any advice is appreciated!

The problem lies with the URLs for your media files. The one for the top episode is
http://www.metalspeak.com/episodes/MetalsPeak 10 - GenresPeak.mp3
This URL contains spaces, which are not allowed in a URL. Browsers - and from what you say iTunes in Windows - handles this by substituting the code %20 for each space when requesting the file; iTunes for Mac does not.
You need either to change the filename for each media file, removing the spaces or substituting something such as an underscore, and then amending the feed accordingly: or at the least to amend the feed by replacing each space with %20.
It's the same problem in the other feed.

Setting up a small business network using mac and windows pcs

Setting up a small business network using mac and windows??

Ok that sounds great. What is your actual question as it relates to AirPort networking? Is it: Can I set up a wired/wireless network with an AirPort base station that support multiple Mac & PC clients? If so the answer is yes.
If, instead, it is how to I configure an AirPort network to support a small business you will have to provide more details on both your networking & computing equipment in order for any of us to help you.

Can't connect to ASDM 6.5.4 with Windows 8 Pro

I am trying to install a new ASA 5505 and I can not connectto ASDM version 6.5.4 with Windows 8 Pro.
The ASA ia giving me a correct ip and http server is enabled with the correct address allowed.
I can ping the asa from the 8 Pro Laptop.
I can connect with an XP PC however with no issues.
This is the second ASA I have had this issue with in the last couple weeks since switching to a new 8 Pro laptop.
Is there a quick solution to this issue?
Thanks.

Hello Craig,
Do you have the HTTP configuration on the ASA to allow the Ip address of the 8 pro laptop?
What Java version are you running ?
Try with version 6 and let me know
For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
Any question contact me at [email protected]
Cheers,
Julio Carvajal Segura

Can aim users and .mac users video/audio chat with each other?

today was a crazy day with ichat. two of my friends were able to video chat 1 on 1. my mac is qualified to handle 3-way or 4-way chats. when they invite me, the bubble pops up. i hit accept and the loading spindle keeps on spinning for minutes until it just denies me entrance. they get an error saying i never accepted, so as soon as they invite me, they don't get any other response back.
could it be that i am on the AIM network and both of them are on the .mac network?
iMac G5 Mac OS X (10.4.9) 1.8ghz, 1.5gig ram, 3rd party camcorder, latest iChat. router installed.

can aim users and .mac users video/audio chat with each other?
Yes. Apple does not have its own publicly available IM service; iChat uses the AIM network, and there are few functional differences between AIM and .Mac screen names. If they are using a client other than iChat, there may be interoperability issues with audio and video chats, or the other client may not support those types of chatting.
(21228)

How can I copy bookmarks from my old computer to my new computer, both with Windows XP Pro?

Transferring bookmarks from old computer to new computer, both with Windows XP Pro?
Thanks for your h4elp.
Also, can I create a file of bookmarks in MS Word or Open Office so that I can save them?

You can export your bookmarks to an HTML file on your old computer, and them import that file on your new computer. The HTML file also is your backup, and if you open it into Word, you could save it as a DOC file if you prefer.
For more information, check out these articles:
[https://support.mozilla.org/en-US/kb/Exporting%20bookmarks%20to%20an%20HTML%20file Exporting bookmarks to an HTML file | How to | Firefox Help]
[https://support.mozilla.org/en-US/kb/Importing%20Bookmarks%20from%20an%20HTML%20File Importing Bookmarks from an HTML File | How to | Firefox Help]
Note that if you are using the orange Firefox button (abbreviated menus), you can access the class menu bar with the full Bookmarks menu by tapping the Alt key or pressing F10.

How can i install hp laserjet 1010 printer with windows 10 pro

HelloI am finding problem with installing hp printer laser jet 1010 with windows 10 pro. Is there any solution to this so i my use my 1010 printer with latest windiws 10 pro.RegardsArshad Janjua

That particular printer is shown by the Windows 7 hardware compatibility website to not be compatible with Windows 7.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O.

Lenovo Yoga with Windows 8 Pro, Office 2013 and Visual Studio

For you developer types, I just wanted to post a message and let you know my experience with Lenovo Ideapad Yoga 13 as a development machine. I bought Lenovo Ideapad Yoga 13 from Bestbuy for $999.99. As expected, it came with a crap ton of bloatware installed by Lenovo.
Here is a summary of what I did to it (I take no responsilibity for accuracy of below information. You are on your own if you decide to follow them. I am just putting this down from my memory so that I can look it up in the future if I ever need to do this again).
INITIAL CLEANUP
Installed Lenovo hotfix for partition cleanup/merging: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS033035
Installed Lenovo Touchpad driver fix.
CAUTION: I take no responsibility for below steps. I am writing them from memory and if you decide to follow them and end up making your machine unusable, you are on your own as Lenovo might not honor your warranty.
BACK UP ENTIRE DISK (requires an empty USB flash drive for booting and another external USB drive for backup)
Copied Drivers from D_Backup folder to the external USB hard drive (plugged into USB 3.0 port).
Installed Paragon Backup & Recovery 2012 Free: http://www.paragon-software.com/home/br-free/
Created Paragon Backup & Recovery boot USB flash drive with default Linux recovery environment option (flash drive plugged into USB 2.0 port).
Shutdown Lenovo Yoga.
Plugged in the Paragon Backup & Recovery boot USB flash drive (USB 2.0 port).
Pressed the one key recovery button (next to power button). Went to BIOS.
In the BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
The machine booted into Paragon Backup & Recovery mode. From there, made a backup of entire disk to the external USB hard drive.
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and restarted the machine.
Logged into the machine and verified that everything was good and checked the external USB drive to verify that the backup image was present.
MAKE WINDOWS 8 PRO BOOT USB FLASH DRIVE (requires a second empty USB flash drive and a second computer with Windows 7. This USB Flash Drive has to be between 4GB to 32GB as Windows won't format 64GB flash drives to FAT32 mode)
(Note: I installed Windows 8 Pro in UEFI mode. See http://pcsupport.about.com/od/windows-8/a/install-windows-8-usb.htm)
You need a licensed ISO image of Windows 8 Professional Full version (not the upgrade version) from your MSDN or Technet subscription or create an ISO from the Windows 8 Pro full version DVD.
Download Windows 7 USB/DVD Download Tool on the computer with windows 7.
Plug in the second empty USB flash drive (has to be at least 4GB but less than 32GB) into the computer with Windows 7.
Using Windows 7 USB/DVD Download Tool and the ISO file, create the Windows 8 Pro bootable USB Flash drive.
Create a new folder on your computer disk, for example, C:\WIN8USB.
Copy all the files from your USB flash drive to the newly created folder (created in the previous step).
Right click on the USB drive icon in Computer window and select “Format…” from the context menu. Make sure you select “FAT32 (Default)” in “File system” drop down menu. Click “Start” and wait till the drive gets formatted. This step is needed because NTFS is not readable by BIOS in UEFI boot mode. During formatting, MBR is preserved so the thumbdrive is still bootable.
Copy all the files from the folder you created earlier (C:\WIN8USB, for example) to the formatted drive. Your Windows 8 installation USB drive is ready to install in UEFI mode.
WIPE THE DISK PARTITIONS
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
Booted into Paragon Backup & Recovery boot USB flash drive again. This time, I deleted all partitions on the primary disk (Disk 0). CAUTION: This WILL wipe your hard disk and will make your machine unusable!!!
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and shut down the machine.
At this point, the disk is wiped clean. All factory installed software and recovery partitions are gone!!!
INSTALL WINDOWS 8 PRO
Plug in the USB Flash Drive with Windows 8 Pro install files.
Windows 8 Installer would show the unallocated disk space. I can't remember the exact details but either I had to click on Delete or New to delete and then create a new GPT partition. The entire partition was about 119GB.
From that point, follow the Windows 8 Pro installation steps.
After booting up into Windows 8 Pro, plug the external USB drive that had the drivers folder backed up from D_backups.
Install all the drivers from this folder (I was able to install everything except for one Intel fast boot one because of missing partition but my Yoga still boots up just as fast).
Go to device manager to check and everything should be good now.
Run Windows Update.
You should now have about 101GB free on C: drive!!
INSTALL VISUAL STUDIO, SQL SERVER and OFFICE 2013 ON LENOVO YOGA 13
I installed the following in that order:
Microsoft SQL Server 2008 R2 Developer edition (I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2010 (I installed all components, everything!). Then I installed latest service pack.
Microsoft SQL Server 2012 Developer edition(I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2012(I installed all components, everything!)
I ran Windows update and also installed Nov 2012 updates of SQL Server Data tools.
I then installed Office 2013 Pro Plus.
MAKE LENOVO YOGA 13 MORE SECURE
Go to Control Panel and enable Windows Defender (it is included by default in Windows 8 and is anti-virus and anti-malware solution)
Enable full hard-disk encryption using BitLocker feature of Windows 8 Pro. Since Lenovo Ideapad Yoga 13 doesn't have hardware TPM, you have to enable password based option. For this, follow the steps here: http://rics.partners.org/show_article.php?id=274.
Basically, you go to GPEDIT.MSC and Open Computer Configuration => Administrative Templates => Windows Components => BitLocker Drive Encryption => Operating System Drives. From the right pane double-click "Require additional authentication at startup. Select Enabled radio button and check the box for "Allow BitLocker without a compatible TPM...". Click OK and close the policy editor. Then Right-click your C drive in the Computer folder, click Turn on BitLocker. Then select Enter a password instead of USB option. Then provide a strong password (make sure to write it down and put it in a SAFE place, if you lose the password, no one can boot into your hard disk). Then select Save to a file and save it to the External Drive. Select "Encrypt entire drive...", click Next. When this is done, you will get a pop-up on the lower-right a prompt to restart the computer. Restart your PC. Enter the encryption password created earlier. If you are successful in getting into Windows, you're all set.
I also hooked up to Skydrive and used BoxCryptor to encrypt my files in cloud.
The available free disk space should now be about 54GB.
I verified that Lenovo Yoga 13 works like a champ with no slowdown with Visual Studio 2010, Visual Studio 2012 and SQL Server Management Studio open simultaneously and Bitlocker enabled!
The keyboard right SHIFT key is small but other than that, it can work as a great portable development machine and Microsoft Reader is great for reading PDF eBooks.
So if you are a Developer on Microsoft platform, go right ahead. Lenovo IdeaPad Yoga 13 is great for running Visual Studio 2010 and Visual Studio 2012 (1600x900 resolution is totally usable) while on the move. Since I have only had this machine for a few days, I can't tell much about the long term reliability.
Solved!
Go to Solution.

Thank you for posting this. I am in this exact situation. I purchased a yoga 13, and installed Visual Studio Express 2012 for Windows Phone. As it turns out, the Windows Phone Emulator ONLY works in a Windows 8 Pro environment. Since the Yoga doesn't have a disc drive, I shared my W7 computer's cd drive, then put in Windows 8 Pro, so that it could install onto the Yoga. Well, after the installation was done, I tried running my program again and ran into the same issue. It prompted me that my environment must be Windows 8 Pro! I thought that Windows 8 Pro already installed but, what confuses me is that I see no indication that Windows 8 Pro installed. When I go to the System Window, it reads: "Windows 8". Should it read Windows 8 Pro?
Ultimately, I'd like to know, are you able to execute the Windows Phone Emulator? I'm not sure as to whether the Yoga has the hardware capability (needs to be SLAT enabled or something like that?), I HOPE it is able to, and judging by your post, it seems like it but I'd love to know your perspective on my approach.
Please let me know if this makes sense, as I'm new to this kind of thing but really want to start development for Windows Phone.

Create pdf in windows 7 pro with acrobat 9.0

I am getting a new computer with windows 7 pro. I have a acrobat 9.0 package which is currently not activated on any computer. I want to be able to create PDF files by printing from various softwares to a pdf printer. (i have been doing this for years in older acrobat versions). Can I use my acrobat 9.0 package or do I need to upgrade. I am not using the more advanced features of acrobat. Only the print to PDF option.
Cliff

For the Acrobat XI upgrade paths:
http://www.adobe.com/products/acrobatpro/buying-guide-upgrade-pricing.html
Be well...

Windows 8.1 pro with cs6 masters. or should i stick with windows 7 pro?

i am building a new pc and considering using windows 8.1 pro with cs6 masters. has anyone had any issues or should i stick with windows 7 pro?

Hi Tedm,
Please check the system requirement for CS6 Master Collection in the below mentioned link.
System requirements | Adobe Creative Suite 6
For more info or clarification you can contact our chat support as well : Adobe - Contact Support – Download and Installation
Thanks!
Eshant

How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

Are Type 1 Fonts compatible with Windows 8 Pro 64-bit?

Are Type 1 Fonts compatible with Windows 8 Pro 64-bit?
Can anyone point to a specific reference that says Type 1 fonts should or shouldn't work?

Hello Nikhil.
Can you see here?
MAIN MODULE INFORMATION:
   SAP GUI for Windows
   SAP Logon Pad for Windows
   730 Final Release
   7300.1.0.1074
   1337608
SYSTEM INFORMATION:
   Operating system: Windows 8 Pro 6.2 (9200)
You are using patch 0 for Windows 8
Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
Patch 7 or higher,.
Apart from that the error is not from the GUI side,
See below:
Previous frontend interpretation time   :           109 ms
Previous server response time           :          5078 ms (for 1 roundtrips)
The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
Please use a supported version for the OS you intend to use.
You can find this information in note
http://service.sap.com/sap/support/notes/66971
Jude

Is the JDK (1.2.2) compatible with Windows 2000 Pro?

Hi Friends!,
It seems that the JDK - Version: 1.2.2 - is not
compatible with Windows 2000 Pro. I know
how to configure the kit in this operating system
even if I'am not able to understand the reason for which
I receive the error in the Command Prompt window - the JAVAC
utility says:
"Can't read: BigDebt.java - 1 error".
I have added the following command line from
the System Control Panel->System->Environment->System Variables:
C:\jdk1.2.2\bin ( where I have installed the kit ).
I also have added the CLASSPATH command line there:
set CLASSPATH=.;C:\jdk1.2.2\lib\tools.jar but the problem persists
and I'am unable to create the BigDebt.class file.
To avoid another nervous wreck please send me the instructions
to configure correctly the JDK (1.2.2) for Windows 2000 Pro.
Thanks.
Julian Jerman - from Italy.

when you runs the java compiler like this
javac BigDebt.java
You need to be in the directory of your BigDebt.java file located.
BTW, it is kind of weird that your java file is saved to System32 directory, there is no benefit doing that.
--lichu

Can I Network My Mac With Windows XP Pro With This Setup?

Similar Messages

Maybe you are looking for