Can I open BridgeView files in LabVIEW?
Hopefully this is a simple question... I know nothing about BridgeView. I have seen screen shots of a collegue's BridgeView application, and the diagrams look just like LV code. He is not a s/w programmer at all, but needs support for his very old application. Due to logistics, it is not simple to just get the files and start trying things. If I had the Bridgeview files (VIs?), could I at least open them in LV for viewing?
Not sure what version of BV he's using, but I'm guessing it's quite old.
Thanks!
Darin wrote:
If I had the Bridgeview files (VIs?), could I at least open them in LV for viewing?
Not sure what version of BV he's using, but I'm guessing it's quite old.
Yes, you should be able to at least open VIs.
BridgeVIEW is what the LabVIEW DSC (Datalogging and Supervisory Control) module was called LabVIEW v6i came out ~2000 ... actually it was more like one name for bundling LV with what became the LVDSC components.
BridgeVIEW v1 more or less corresponds to LVv4 with extras, and BVv2 is LVv5 with extras (if I remember correctly).
If you have just plain LabVIEW (i.e. without DSC module), you'll be able to open the VIs, but you'll have a lot of broken wires/missing subVIs if your friend was making substantial use of what BridgeVIEW was intended for (Read Tag, Write Tag, Read Historical Trend etc. etc.).
Edit: LV DSC linkMessage Edited by Donald on 06-17-2005 02:48 PM
=====================================================
Fading out. " ... J. Arthur Rank on gong."
Similar Messages
-
Can not Open exe file that is created by Labview 2010 SP1
Hi Everyone,
My Operating system is XP .. I installed .net latest version but I can not open exe file. I try to open exe file, then crashes , quits without seeing any interface.
I tried with another computer whose o.s is xp too. I can open exe file. I saw it is created by Labview 2010 Sp1
I dont know what the difference is. I attached config file.
Attachments:
TPS65175 C (Vcom only).ini 1 KBburak35 wrote:
[..]Do I need any other components besides .Net?
That's a question only the provider of the application can answer.
You could also take a look into the system event log if there is an indication for the reason of the application failing to start properly. It is possible that certain services are required for the application, but they do not run on the machine.
Another point is possibly missing rights. So you might want to test the application once with the option "Run as Admin" (right click menu item on the application shortcut or the exe itself).
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Thank you very much. If you can please, atach a file by Labview 8.0 or oldest version.
Here it is... But in the future you shouldn't start a new thread - reply to the original one. If nothing else it helps me remember what conversation it was associated with...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
xy example80.vi 22 KB -
How can I read pdf files from LabVIEW with different versions of Acrobat reader?
How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi 43 KB
Read PDF file.jpg 201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi 42 KBhi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!" -
How to open multiple files in Labview?
I want to open multiple files in labview by selecting multiple files,then read them? Can I do this in Labview 7.0?
You can use the vi example here to get multiple names:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000C7640100&HTHREAD=000091335&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Once you have the file names, you can use a for loop w/ a Read/Open file vi to open all the files.
2006 Ultimate LabVIEW G-eek. -
I can´t open this file.vi
"labview load error code 8" labview 5.1; 5.11, ...says .I can´t open this file what happen ? could you be able to open it ? If changes something could you re-send me
Attachments:
ECED4760 ECGlab.vi 103 KBYou will not be able to open this VI in LabVIEW 5.1 or 5.11 because it was last saved in LabVIEW version 7.0. It opens fine in version 7.0, 7.1, and 8.0.
LabVIEW Champion . Do more with less code and in less time . -
I can not open the file in Photoshop...
I can not open the file in Photoshop after formattatto pc.
I get the following error "could not complete your request because there is an error in the program
Please me!
Thank youVersion CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update -
I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.
Hi,
Which Adobe Service did you purchased?
If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
Sign in with your Adobe ID and password, and then convert your word doc into PDF.
Please let me know if that works.
If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
~ Aditya -
Can't open CR2 files in photoshop and camera raw
This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well. -
Can't Open any files in photoshop CS3
I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now
reset the preferences per the faq?
http://www.adobeforums.com/webx/.ef4a07f/1 -
Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.
Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave -
Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek -
Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name: APPCRASH
Application Name: AcroRd32.exe
Application Version: 11.0.10.32
Application Timestamp: 547e9779
Fault Module Name: StackHash_147f
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c000041d
Exception Offset: 77a011f1
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 147f
Additional Information 2: 147ff66574b08dc93180d912e60eb897
Additional Information 3: c48b
Additional Information 4: c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtCan you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].
-
Updated to latest ACR 6.6 but still can't open CR2 files from Canon Rebel XSi
I updated to latest version of Adobe Camera Raw 6.6 but still can't seem to open my CR2 files in Photoshop. Can't open them in Lightroom either, no preview in Bridge or OS.
I'm running OS 10.7.2 and Photshop 12.1 x 64 which is CS5.1 I suppose.
I've downloaded Canon's EOS utility hoping that would somehow do something as well but nothing.
The images were shot on Canon Rebel XSi which is certainly supported by the newest version of ACR. So I have no clue as to what's happening... I previously downloaded these images onto my old laptop about a year ago and everything was fine, however now I'm not even getting a preview in OS. Do I have to revert to an older version of ACR (perhaps the same one I used originally?) to open these files again? These files have been stored on a hard drive, so I'm not downloading them directly from the camera-again, this probably has nothing to do with it but not sure what to do. A lot of the posts I've seen recommend downloading the latest version of ACR to fix the issue, but again I've done that and as a matter of fact the camera (Rebel XSi) has been supported for some time now...
In OS, when the image is selected no preview:
Lightroom error:
Bridge, no preview:
Photoshop error:
Ideas, suggestions?
66 views on this discussion so far and no replies...
Please help.
Thanks in advance,
ArthurSomething appears to be wrong with your files.
Are most of your images approx. 3.7 MB?
This is very small for a 12 MP image.
If you go back to the original file on your laptop, what is the file size?
Also the fact that the Mac OS is not showing the preview is unusual.
Perhaps these files got corrupted when they were moved to your new computer.
Can you open these files OK on your old laptop?
Is the OS showing the previews on your old laptop?
Also compare the file sizes between old and new computer.
Have you tried repairing your permissions?
Try Disk Utility in your Macs Applications - Utilities - Disk Utility to see if this helps.
Good Luck! -
I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing". Original file is written on iMac (2014) and saved to an USB stick and then transferred till macBook Pro (2009, Yosemite) for editing. Then I shared the files by iCloud but I am not able to open them on iMac again. Niether can I use the USB stick to transfer the edited files back. I'm running Pages '09 4,1 (923) on the macBook and Pges 5.5.2 (2120) on the iMac.
HåkanPages 5.5.2 is extremely incompatible with even other Macs let alone the vast majority of PC and MsWord users out there, so not a good idea to leap into the fire with both eyes shut.
After having done that to the first Pages 5 files, Apple has repeatedly done it to even the most minor point updates. Apple can't even anticipate its own erratic changes let alone what everyone else needs doing.
Peter
Maybe you are looking for
-
TS1702 ive locked my ipod by typing in wrong password too many times, how do i re set ipod
i have locked my ipod by typing in wrong password
-
Solaris 10 only wants to work on low resolution
Hi, I have a NVIDIA Vanta 16mb video card with an AOC Spectrum 7Eira 17" monitor. When installing Solaris 10 it detected correctly the video and monitor and I selected 1024x768 256 colors resolution. Now the OS only works on a 640x480 resolution. I t
-
Is there a way to set a password on the email app to prevent anyone that picks up my phone from reading or accessing my email?
-
Serious problems after Mavericks installation with External Drive Lacie P9220.
Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked! I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully
-
How to update iPod touch version 4.0?
I have an iPod touch 2nd generation (I believe) and it's 8GB. How do I update it to the new 4.0 version? My iTunes says its up to date when I check for updates, but it says that I have version 3.1.3. I am so confused and I don't even know if I can ev