Can I open my G5 to see where the squeaking is coming from?

I made an earlier post about the squeaking noise coming from my G5. Thanks to everyone who tried to help but the sound isn't an electronic squeak, its an aucostic one, such as squeaking wheel or chair. I was wondering while the computer is on, if I could take off the side panel (leaving the see through one on) to see where the noise is coming from. Can you do this or will it shut down?

This squeaking is a result of the pull out fan assembly shaking when turning. The plastic portion when the fan plugs in/pull out gets slightly shaken loose during delivery. Just shutdown you Mac, open it and pull out the fan (in front of the RAM) and then just firmly but not to hard push the fan assembly back in. Just make sure it is in there nice and good.
I had the same thing happen to me when I first got my G5. It took me couple weeks to figure out where the squeak was coming from. One more thing, just be sure to always have a can of compressed air handy because the G5 has a real good tendency to suck in dust from the room. Clean your G5 around every two months to keep it clear of dust.

Similar Messages

How can I make rectangular speech bubbles that adapt to the text inside them without the "arrow" that points towards where the bubble is coming from getting changed?

I have to make lots of speech bubbles (150+) that all have texts inside them which differ in length. I want the speech bubbles to look the same in terms of style, but I need different sizes of course for each text. This means that the rectangular part of the speech bubble should adapt in length and width to the text inside it, while the "arrow" pointing towards where the bubble is coming from (e.g. the person who speaks) should stay the same on every bubble. So is there a way or a workaround to make such "adapting" speech bubbles?
I appreciate any kinds of help
Thanks in advance!

Here's another way I found:
1. Draw a speech bubble. Mine is a rectangle with rounded corners and a triangular pointer added with Pathfinder > Add
2. Drag out a frame the same size as the speech bubble. Select the speech bubble and Copy; then select the empty frame and choose Edit > Paste Into...
3. Alt-Drag the frame with the pasted speech bubble to make a copy, then crop one copy to leave only the top of the bubble showing, and crop the other copy to leave only the bottom.
4. Drag out a text frame and insert a table consisting of 1 column, 3 rows. Set the text frame to Autosize > Height Only.
5. Set the stroke/fill of the top and bottom rows to none, and style the middle row to match the speech bubble, (in my case a white fill and 2pt stroke; left and right).
6. Anchor (paste) a copy of the speech bubble top in the top table row, and a copy of the speech bubble bottom in the bottom row.
Getting the 3 parts to match up with is where you just have to work on it until you get it right. Use the positioning tools in Anchored Object options and the column width setting in Cell options to line everything up.
Enter your text in the middle row. (Hey, look at that...a valid application of Comic Sans!) With the Cell Height set to an "At Least" setting, the cell will expand to fit whatever text you enter, pushing the the bottom row down, with the text frame auto-sizing to keep everything in play...

Can't tell where the problem is coming from.

Hey there recently replaced my hard drive because I thought this was the reason I was having all these issues only to find out that in fact it must not have been. I really don't know if the problem is more technical or located somewhere else on the hardware, but the hard drive replacement went well and as planned, I doubled my space, yay.
Anyways I replaced hard drive -- transferred files from time machine backup to new hard drive via migration utility. All went very wonderfully. Only issue is I'm still having the same problem with my computer crashing whenever I attempt to utilize it for high CPU programs. No matter how hard I try I cannot read or make sense of the crash reports, this was really my last resort to post a wall of text, but here it goes.
This happens with multiple of my programs so I don't know where the source of my issues are, but would love to hear some good news for once. I am so very close to just transferring my iTunes library to a new account and starting fresh there.
Anyways CRASH REPORT:
Interval Since Last Panic Report: 31982 sec
Panics Since Last Report:          11
Anonymous UUID:                    1021B78D-2FE0-5680-27D3-CD0EBFF6CEBA
Thu Aug 29 21:20:44 2013
panic(cpu 1 caller 0xffffff7f8d23bf1a): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff810c965000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 1), Frame : Return Address
0xffffff80f3753000 : 0xffffff800b01d626
0xffffff80f3753070 : 0xffffff7f8d23bf1a
0xffffff80f3753140 : 0xffffff7f8b8e5f1e
0xffffff80f3753200 : 0xffffff7f8b9ba12d
0xffffff80f3753240 : 0xffffff7f8b9ba18e
0xffffff80f37532b0 : 0xffffff7f8bc80ed0
0xffffff80f37533e0 : 0xffffff7f8b9e2a75
0xffffff80f3753400 : 0xffffff7f8b8ecd50
0xffffff80f37534b0 : 0xffffff7f8b8ea7d0
0xffffff80f37536b0 : 0xffffff7f8b8ec10a
0xffffff80f3753780 : 0xffffff7f8c7f54a8
0xffffff80f37538c0 : 0xffffff7f8c7f4f94
0xffffff80f37538d0 : 0xffffff7f8c7b8348
0xffffff80f37538e0 : 0xffffff7f8c7b83bd
0xffffff80f37538f0 : 0xffffff7f8c7a3c5e
0xffffff80f3753910 : 0xffffff7f8c7a2e17
0xffffff80f3753a90 : 0xffffff7f8c7d3f0f
0xffffff80f3753b50 : 0xffffff7f8c7a18c8
0xffffff80f3753ba0 : 0xffffff800b466e69
0xffffff80f3753bc0 : 0xffffff800b468410
0xffffff80f3753c20 : 0xffffff800b465e2f
0xffffff80f3753d70 : 0xffffff800b098c01
0xffffff80f3753e80 : 0xffffff800b020b3d
0xffffff80f3753eb0 : 0xffffff800b010448
0xffffff80f3753f00 : 0xffffff800b01961b
0xffffff80f3753f70 : 0xffffff800b0a6536
0xffffff80f3753fb0 : 0xffffff800b0ce9e3
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7f8d22e000->0xffffff7f8d240fff
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[1D0BB11E-7D71-34CF-ACC3-57DF01CADA 08]@0xffffff7f8d229000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8b673000
            dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7f8d215000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f8b63c000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f8b870000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f8b82d000
         com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f8b8 84000->0xffffff7f8bb29fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8b673000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f8b870000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f8b82d000
         com.apple.nvidia.nv50hal(8.1.2)[988EAF3A-3318-3787-8A5A-844830FA1522]@0xffffff7 f8bb35000->0xffffff7f8be09fff
            dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f8b8 84000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8b673000
         com.apple.GeForce(8.1.2)[7EC545A4-4B57-32F1-8DC3-C31023AFBDCB]@0xffffff7f8c78f0 00->0xffffff7f8c85cfff
            dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f8b8 84000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f8b870000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8b673000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f8b82d000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x000000000ae00000
Kernel text base: 0xffffff800b000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 110004059130
last loaded kext at 38237399107: com.eltima.ElmediaPlayer.kext    1.58 (addr 0xffffff7f8c8ad000, size 16384)
loaded kexts:
com.eltima.ElmediaPlayer.kext    1.58
com.bresink.driver.BRESINKx86Monitoring    7.0
com.Cycling74.driver.WondershareAudioDevice    1.5.2
com.Cycling74.driver.Soundflower    1.5.1
com.iospirit.driver.rbiokithelper    1.21
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleUSBCDC    4.1.23
com.apple.iokit.IOBluetoothSerialManager    4.1.4f2
com.apple.driver.AGPM    100.12.87
com.apple.driver.AppleTyMCEDriver    1.0.2d2
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleHDAHardwareConfigDriver    2.3.7fc4
com.apple.driver.AppleHDA    2.3.7fc4
com.apple.GeForce    8.1.2
com.apple.iokit.IOBluetoothUSBDFU    4.1.4f2
com.apple.filesystems.autofs    3.0
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AppleIRController    4000
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.driver.AppleIntelHDGraphics    8.1.2
com.apple.nvidia.NVDAStartup    8.1.2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.1.4f2
com.apple.driver.AppleMikeyDriver    2.3.7fc4
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleBacklight    170.2.5
com.apple.driver.AppleSMCLMU    2.0.3d0
com.apple.driver.AppleIntelHDGraphicsFB    8.1.2
com.apple.driver.AppleMuxControl    3.4.5
com.apple.driver.ApplePolicyControl    3.4.5
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AppleMCCSControl    1.1.11
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.SMCMotionSensor    3.0.3d1
com.apple.driver.AppleUSBTCButtons    237.1
com.apple.driver.AppleUSBTCKeyEventDriver    237.1
com.apple.driver.AppleUSBTCKeyboard    237.1
com.apple.driver.AppleUSBCardReader    3.1.7
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.5
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.3.1
com.apple.driver.AirPort.Brcm4331    615.20.17
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AppleAHCIPort    2.5.2
com.apple.driver.AppleUSBHub    5.5.5
com.apple.iokit.AppleBCM5701Ethernet    3.6.1b4
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleUSBEHCI    5.5.0
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleEFINVRAM    1.7
com.apple.driver.AppleACPIButtons    1.7
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.7
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2.1
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.driver.DspFuncLib    2.3.7fc4
com.apple.nvidia.nv50hal    8.1.2
com.apple.kext.triggers    1.0
com.apple.NVDAResman    8.1.2
com.apple.iokit.IOAudioFamily    1.8.9fc11
com.apple.kext.OSvKernDSPLib    1.6
com.apple.iokit.IOSurface    86.0.4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.1.4f2
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.iokit.IOBluetoothFamily    4.1.4f2
com.apple.driver.AppleHDAController    2.3.7fc4
com.apple.iokit.IOHDAFamily    2.3.7fc4
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusPCI    1.0.11d0
com.apple.driver.AppleGraphicsControl    3.4.5
com.apple.iokit.IONDRVSupport    2.3.7
com.apple.driver.AppleSMBusController    1.0.11d0
com.apple.iokit.IOGraphicsFamily    2.3.7
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.3.0d51
com.apple.driver.AppleSMC    3.1.4d2
com.apple.driver.AppleUSBMultitouch    237.3
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.5
com.apple.iokit.IOUSBMassStorageClass    3.5.1
com.apple.driver.AppleUSBMergeNub    5.5.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.5
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.5
com.apple.iokit.IO80211Family    530.4
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IOAHCIFamily    2.3.1
com.apple.iokit.IOUSBUserClient    5.5.5
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.6.0
com.apple.driver.AppleEFIRuntime    1.7
com.apple.iokit.IOHIDFamily    1.8.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220.3
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    345
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.7
com.apple.iokit.IOPCIFamily    2.7.3
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.4f2 12041, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD10JPVX-22JC3T0, 1 TB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4

Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. They should be more than willing to install a new logic board at no cost. I have no idea why this faulty GPU is making the headline here on the MacBook Pro forum so often now - could it be because Mountain Lion is just bringing the issue to a head more readily? I don't know - I only know that we're seeing more and more of these kernel panics of late.
Good luck,
Clinton

Audio problem; can't seem to control where the sound is coming from!

Good day!
I am currently trying to set up a VERY basic "two camera shoot" using my built in iSight, and a Sony DCR-TRV315 Digital-8 w/FireWire camcorder.
(I know, I know; I'm breaking all sorts of rules using such unmatched cameras. I'm a terrible videographer.)
I'm NOT capturing from tape, however. I'm just using the lens of it to get a different shot. By just plugging it in, iMovie recognizes it, just as it would a FireWire webcam, and allows me to capture straight to the hard drive.
To record audio, I'm using a Griffin iMic (USB preamp) with a Sony lavaliere mic.
I have, of course, selected the iMic as the device for sound input in Sound Preferences.
When I set the input camera to the built in iSight, the iMic kicks in and the lavaliere works like a dream. However; when I switch to the Sony camera, the iMic seems to get overridden, and the Sony camera's built-in mic kicks in! And the Sony camera isn't even IN the "choose a device for sound input" box in Sound Preferences!
Is there any way to record JUST the video from the Sony DCR-TRV315, and keep the audio coming in from the iMic? I can't seem to find an audio preference that would control this, like you'd find in Garageband for example. This is a big problem. The look of the video changes enough between shots; I can't have the sound changing with it!
Thanks for any help!

Thanks everyone.
Unfortunately, I think that M. Dubose is correct; for some reason, it doesn't want to seem to split up the FireWire input.
The real kicker is that, by using the Griffin iMic along with the built-in iSight, I'm ALREADY getting sound and video from two separate sources. It just doesn't want to let me split this FireWire signal like it will the iSight's video signal/built in microphone.
If it wasn't for this one thing, the input toggle could work quite effectively as a basic switcher. Hopefully, in future iMovie builds, the need for an independent iMovie Sound Prefs will be addressed, as that'd likely take care for this whole thing.
The other issue is that the camera I'm using isn't true DV; it's Sony's proprietary Digital 8 format, which unfortunately, ain't too hot for image quality. That's why I'm hesitant to record to the tape and import. However, the lens and the FireWire port are still very valid, so by recording directly to the hard drive, it should have been fine for my needs.
Also; the idea of THAT much precise editing in a single-channel software just makes my head spin. Switching inputs between shots would have been so much easier. Ah well. iMovie is a good program otherwise; I guess you just can't expect the world from free software, eh?
I'll probably test it with a buddy's FireWire camcorder to make absolutely sure that it isn't just some freaky incompatibility keeping me from selecting the audio in of my choice. But I can't say that I'm too optimistic.
Thanks again, everyone!

How to find where the data is coming from in appended field for BW extract

I am not an ABAP'er ... And this problem is about a BW Extractor
I am extracting data for my (Utility Industry) Sales Statistics Cube using 0UC_SALES_STATS_01 data source. The Extract structure is BIW_ISU_ESTA and we are appending the structure with a few fields:
I_ZAHL1
I_ZAHL2
I_ZAHL3
I see some similar fields in DBERCHZ1 which are not the same. The data gets filled in the above fields somehow. I need to find out how and where. We have now diffrent variation of the same data and I'd like to extract that transactional data as well using the same fields rather than appending more fields to an already huge extract structure. When I click on the fields in BIW_ISU_ESTA, it takes me no where. I also tried out the extractor program (RSA3) in debug mode but somehow the fields are already populated. I tried using the ABAP dictinary but can't find a way to find these fields there.
Any help would be appreciated.
Thanks a lot.
Bilal

Thanks Renata,
This is a standard business content extractor with the fields enhanced. Usually we have some user exits to populate the fields but in this case we only append the extract table. I couldn't see these fields being part of any existing includes in the extract struct but some how they get populated. I guess system knows from where to copy the data.
Thanks for your reply though. I am closing this thread as it seems not a very popular cube.
Bilal

Apple TV quits unexpectedly and when I look at the Mac Mini where the Music is coming from, it says someone else is using the Apple TV. Any idea how this happens? All s/w is updated. Re-booted all h/w.

The Apple TV will play four or five songs from the Computer, and then stops suddenly. It's worked fine for months until a couple days ago. The message says the AirPlay/Apple TV is being used by another person. When I go down to the tiny icon in the iTunes box (lower right), it only offers Computer as option and no longer shows Apple TV as option.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

Can't open keychain access to see a password

can't open keychain access to see a password.

Create a new admin user account, log into it, and see if the problem persists. Also, see http://www.thexlab.com/faqs/multipleappsquit.html Report back.

HT5085 I ordered a TV series-I can see where the $$ was taken from our account but I can't find the series anywhere on my iTunes account??

ordered a TV series…I can see where the $$ was taken from our account but I can't find the shows anywhere in our itunes account.

Hello NMS1,
It sounds like you are unable find these TV shows you purchased in a series, but you have been charged for them. I would start by checking to see if you can download them from your Purchases in the iTunes Store with this article:
Download past purchases
http://support.apple.com/kb/ht2519
The steps are different if you are on an iOS device vs. a computer, so choose the appropriate section for the device you want to download them to.
If you cannot find it in your Purchases, I would next reach out to the iTunes Store support team for additional assistance:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
All the best,
Sterling

I recently partition 250gb of my hd and i decided no delete the partition. but now i can't see where the 250gb is. I can only see 750gb of my hard disk

i recently partition 250gb of my hd and i decided no delete the partition. but now i can't see where the 250gb is. I can only see 750gb of my hard disk

Hi Cedric,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Disk Utility 12.x: Partition a disk
http://support.apple.com/kb/ph5845
I hope this information helps ....
Happy Holidays!
- Judy

I recently subscribed to acrobat pro. I downloaded it, but can't open it. I keep getting the window saying application quit unexpectedly. I running Mavericks. Is that a separate download? Where do I get it?

I recently subscribed to acrobat pro. I downloaded it, but can’t open it. I keep getting the window saying application quit unexpectedly. I running Mavericks. Is that a separate download? Where do I get it? I downloaded on Safari. Should I have used Firefox?

Hi Kenglade,
Are you still facing this issue?
If yes please try follow below mentioned steps and let me know if that helps:
    1. Start you Mac in Safe Mode: http://support.apple.com/kb/HT1564?viewlocale=en_US
    2. Once you are in Safe mode, Disk repair using Disk utility: https://us.battle.net/support/en/article/repair-disk-permissions-and-repair-disk
    3. If the above steps didn’t help, you may try to enable root account and check the issue from there
    How to enable root account: http://support.apple.com/kb/PH14281
Regards,
Ajlan Huda.

Can't open iTunes. Get this msg: "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." HELP!

Can't open iTunes. Get this msg: "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." HELP!

go to the directory where the itunes librairy is stored (google search!). Select the file hit "command+i" on your keyboard or control click on the file and select get info. there is an option to either lock or ulock the file. unlock it. restart your computer and see if it works.

HT201209 My mom who lives in Canada send me an iTunes gift and I can't open it. I live in the USA. Is there a way for me to redeem that gift?

My mom who lives in Canada send me an iTunes gift and I can't open it. I live in the USA. Is there a way for me to redeem that gift?

No, all iTunes gifts and gift cards are country-specific - so a Canadian gift can only be redeemed in Canada onto a Canadian iTunes account.
I assume that it's an emailed gift ? She can try resending it to somebody else in Canada : http://support.apple.com/kb/HT1541
Or, and if she's been charged, she can try contacting iTunes Support and see if they will refund or credit her : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I can't open i tunes, I've followed the instructions given on this site but it still won't open

I can't open I tunes, I've folowed the instructions given on this site but it still won't open. Any alternative suggestions?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

I have created some movies using After Effects but can't open them now because I get the following message:

I have created some movies using After Effects but can't open them now because I get the following message:
Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray-tracing will use the GPU.
After installing CUDA 5.0 or later, restart your computer.
For more information see: http//www.adobe.com/go/aeraytracedgpu
HELP. I have a project that needs to be delivered.

The alert message is just telling you that a specific feature won't use the GPU. This message is innocuous. It only means that the processing of one specific, obsolete feature will use the CPU, not the GPU.
Are you saying that After Effects won't start or open your project?

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

Can I open my G5 to see where the squeaking is coming from?

Similar Messages

Maybe you are looking for