Can I open the (.squ) sequence files using NI test stand 4.0 version?

I have the sequence files created using ATETool Kit test Executive. But I have NI 4.0 test stand. I want to open the sequence files using NI 4.0 test stand. Can i do that?

Hi,
I am not familiar with ATETool kit Test Executive, but I doubt NI TestStand will open this. As you have both, have you tried it?
TestStand does have a conversion tool for converting NI TestExecutive sequence files into TestStand sequence files.
Maybe you could write a conversion tool to make the conversion for you if you have many ATETool kit Test Executive files.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

I can not open the bookmarks tab or use the right mouse button in firefox

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1053467 /questions/1053467]''
I recently downloaded firefox to my new laptop. I can not open the bookmarks tab or use any of the right mouse button options.

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

eBay or Craigslist would be the only choice.

I have downloaded trial for Windows English version, but can't open the Captivate_8_LS21.7z file. I have 32-bit. Will this work or shoudl I redownload?

I have downloaded trial for Windows English version 1.45GB.
It has downloaded but I can't open the Captivate_8_LS21.7z file.
I have 32-bit. Will this work ?

Hi There,
In order to download / install Captivate 8 32 bit, you have to download 2 files ( .7z and .exe ) at same location/ folder.
Once both files downloaded completely then you have to run .exe file and it will extract .7z file first and then it will initialize the installer. You do not have to open .7z file.
Let me provide you the download links of Captivate 8 32 bit :-
Open the link mention below in any Web Browser say Internet Explorer
https://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate
Sign in with your Adobe id and Password, then you will be redirected to download Web Page of Captivate 8.
Do not click on Download. Kindly let that window open as it is.
Now Copy and paste the link mention below in the new tab/window of the same Web Browser in which you have opened the above link.
http://trials3.adobe.com/AdobeProducts/CPTV/8/win32/Captivate_8_LS21.7z
Then Save the file.
Do the same for the link mention below and save this .exe file as well.
http://trials3.adobe.com/AdobeProducts/CPTV/8/win32/Captivate_8_LS21.exe
Make sure both the files (.7z and .exe) save/download at the same location/folder.
NOTE: Wait for both the files to finish download and then run the .exe file.
Once you run the .exe, it will start extracting the .7z file and will provide Captivate 8 folder on your desktop which will contain setup.exe. Run this setup.exe to install Captivate 8.
Regards,
Ajit

I'm in syria and they blocked me from using any VPN service please help without VPN i can't open the store help please ( using iphone 5 version 9.1.4 )

I'm in syria and they blocked me from using any VPN service please help without VPN i can't open the store help please ( using iphone 5 version 9.1.4 )

There is nothing that anyone here on a user forum can do to help you. If it is a local issue in Syria, then you need to take it up with your phone company or authorities there who have prevented you from using VPN.
Nobody here can help you.

How can i open the archived pst file in my Mac Air

How can i open the Archived outlook pst file in my Mac air, i want to access my old outlook mails.

System.setProperty("java.security.policy", "system.policy");Is this a new feature in JDK1.4? I don't see it in
the documentation for JDK1.3.1 that I'm currently
using.Look more closely. There is indeed a setProperty(String, String) in
http://java.sun.com/j2se/1.3/docs/api/java/lang/System.html
"Since 1.2"
- Marcus

Added a check to Text to sequence file result in Test Stand hang up.

I added the check in text to sequence file translator.vi (the file is attached)
With this addition I generated the dll.
Test Stand load the sequence file without any problem for the first time.
If I add a space to the sequence file and save the file; test stand tries to load the new sequence file saying file has changed do you want to load the new sequence...
But fails to load the sequence (Test Stand hangs up)
The only way to overcome is kill the TestStand thru task manager.
Which displays
"You chose to end the nonresponsive program, SeqEdit.exe"
Attached the displayed error (error.doc)
Attachments:
Changed code.vi ‏55 KB
Error1.doc ‏45 KB

Hi Vidula,
Is it only when you add a space to the file name that you see this behavior? If, for instance, you add a '1' to the beginging of the file name does the same thing happen?
Adam
National Instruments
Applications Engineer

Can't Open the domain.sites2 file I Want To!

I'm tearing my hair out here!
I had multiple websites within iweb 08, but using it as more of a publishing facility and creating graphic adverts and stuff. Then I decided to make a website, which is where it all went to pot.
I hadn't realised that the domain.sites2 file contained all the information for the multiple sites.
What happened:
I downloaded iwebsites to separate sites and once managed to upload the website I wanted to publish to my .mac account. Then I successfully retrieved the old websites again fine.
When I tried this process again, everything was lost other than the published site. I had a back up of the domain.sites2 file on an external hard drive which I am now trying to get to open in iweb! And it won't.
I have gone through the process of deleting the iweb preferences and opening a blank site, saving it and replacing it with the old domains file with the content I want to open, but it always reverts to a new site (asking me to pick a template) or the last saved 'test' site.
I really don't want to lose everything I have been working on for the last 2 years! Does anyone have any ideas why the domain file I want to open isn't showing the correct content?
I would appreciate any help! Thanks

Yep I've tried that but it reverts back to the last saved test site. When I look at the package contents the pics and other items from all my sites are there but will not open as before!

RH can't open the settings.isf file. NOW what am I to do?

I have TCS 2 and am linking FM9 book to RH8 project.
I had some problem with my TOC and couldn't figure it out, so I decided to start a new RH project and relink my book. When I tried to load the settings from my stetting.isf file, I get the following error message: "Experiencing problem opening the setting file. Please import another settings file." I don't HAVE another settings file. THIS is the one I have worked to build over the last four MONTHS. I tried exporting settings from other projects, and it tells me it exported successfully, but gives me the same error when trying to load the settings file. Please, please help me. I am supposed to be done with this project today.
Missy

That's a good idea Peter. I've attached some screen shots, and here are the steps I followed:
Open project that has the FrameMaker to Robohelp settings defined.
Select File > Project Settings
In the Project Settings dialog, select "Save Settings to:" In this example, I used the following location: C:\test\settings.isf
Click ok.
Click File > Close Project
Open the project that I need to import settings into.
**Note that this project uses the same template as the project I used to export settings; in other words, it has the exact same set of paragraph tags, character tags, colors, cross-ref formats, etc defined.
Attempt #1: I am trying to import my settings BEFORE linking the FrameMaker book.
File > Project settings.
Load Settings from:
c:\test\settings.isf
Note the error message (screen cap attached). I'm not sure where it's looking for the file, but it isn't the location I specificed.
It seems to be looking here:
C:\Documents and Settings\myusername\Local Settings\Temp\IFSfolder
Attempt #2 Link the Frame book and THEN try to import the settings. Same results.

How can I open the .SAR extension file

hi all
i got one file from OSS notes and it has a extension.SAR .I want to see the containts of that file how can i see, in notepad it shows the row value.
thanks.

You need the SAPcar utilitly.
http://www.easymarketplace.de/SAPCAR.php
You can download it on the service market place.
sevice.sap.com. Search for sapcar
Regards,
Rich Heilman

I am trying to enable writing of my bookmarks file and have followed the directions to do so but I can't open the places.sqlite file. I have no application with which to open it.

The problem I am trying to fix is that I can't save any bookmarks. I uninstalled then installed again and still have this problem. There are no other problems but this one. I have tried disabling my extensions but that didn't work.

See:
* http://kb.mozillazine.org/Bookmarks_not_saved
* http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

I can not open the download word file converted from PDF

HOw do I get the Download to open

Sounds like you are using one of the online services, like the cloud. This forum is for the stand-alone Acrobat and I have no clue. The cloud or related forum should provide better info.

How to Run teststand sequence file using the LabVIEW

Hi
I want the execute the Teststand Sequence file using the LabVIEW .Net containers.I didnt find out the Execution Parameter in the .Net Container.Do you any suggestion regarding this question.Please let me know.
Jayavel

TestStand comes with loads of Operator Interface examples some simple, some full fledged. You can find it in teststand public folder win7 path here:C:\Users\Public\Documents\National Instruments\TestStand 2010 SP1\UserInterfaces
You can take these examples or use ideas from here, also read the teststand reference manual. It has a section about Operator Interfaces.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

How can I open the win mail.dat file on my outlook mac

I can't open the winmail.dat file on my outlook mac.

http://www.maclife.com/article/howtos/how_open_winmaildat_files

How can I open outlook vCalender type files (.vcs files) in Firefox?

''Locking as duplicate, continue at'' [/questions/749342] - TonyE
n my application,I hava a fature that make use of Calander.vcs file to get a schedule appointement in outlook.with IE browser,it is working fine.But Firefox can not open the Calander.vcs file and showung some code in the webpage.

Maybe the view menu, refer to the article below.
* [[What happened to the File, Edit, and View menus?]]
Hopefully this helps.

Can I open the (.squ) sequence files using NI test stand 4.0 version?

Similar Messages

Maybe you are looking for