Can I order Prime infrastructure Cluster?(wcs navigator)

1. can I order Prime infrastructure Cluster?(wcs navigator)
2. I want to see relation document and license policy. how to search ?
3. reference site ?

Yes you can order. Here I am providing you three link you can go through these links these will describe how to order and configure Prime.
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-714720.pdf
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/deployment_guide_c07-721232.html
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/maps.html

Similar Messages

Prime Infrastructure 1.3 Can't start DB.Can't use WEB interface access

Hi,
Suddently, all services at prime infrastructure 1.3 are stopped. It's working fine previously. I try to restart the ncs service also doesn't help.
here is the ncs status:
PRIME01/netsvcsdm# ncs status
Health Monitor is running, with an error.
initHealthMonitor(): can not start DB
Reporting Server is Stopped
Ftp Server is Stopped
Database server is stopped
Tftp Server is Stopped
Matlab Server is Stopped
NMS Server is stopped.
SAM Daemon is not running ...
DA Daemon is not running ...
Syslog Daemon is not running ...
status
PRIME01/netsvcsdm# ncs start
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Health Monitor is already running.
Failure during Network Control System startup. Check launchout.log for details.
start
Note: I notice that the MEM LED at light path diagnostics panel components is lit. I check at cisco documentation, it indicate memory error. is it confirmed appliance issue?
Please advice. Thank you

Thank you for the reply. sorry for late update.
1. I try to reseat the memory card, MEM LED from diagnostic panel is not lit anymore. I think it solve the memory problem initially.
2. I use the following command to refresh the database
NCS stop
NCS DB reinitdb
NCS start
After reinitdb, I can login to prime infrastructure. it seems like the system is working fine. All of the configuration is gone. So, I proceed to restore the configuration.
3. Restore configuration
When I try to restore my configuration, I have the following error.
PRIME01/netsvcsdm# restore 2013-07-24_PRIME01-130724-1853.tar.gpg repository localftp application NCS
Restore may require a restart of application services. Continue? (yes/no) [yes] ? yes
Initiating restore. Please wait...
Stage 1 of 9: Transferring backup file ...
-- complete.
Stage 2 of 9: Decrypting backup file ...
-- complete.
Stage 3 of 9: Unpacking backup file ...
--complete.
ERROR : There is the mismatch in the following configuration parameter(s) of this machine when compared to the machine where the backup was generated: DB Memory Target, RAM Size -> can’t restore the configuration due to RAM size different.
ERROR : This may affect the performance of the current machine. Hence aborting restore process.
% Application restore failed
PRIME01/netsvcsdm#
PRIME01/netsvcsdm# show inventory
NAME: "PRIME-NCS-APL-K9 chassis", DESCR: "PRIME-NCS-APL-K9 chassis"
PID: PRIME-NCS-APL-K9 , VID: V02 , SN: KQ7T4TM
Total RAM Memory: 12141876 kB -> Appliance only detect the RAM memory as 12GB. Our Appliance has 16GB memory. I suspect 1 of 4 memory was spoiled.
I notice that the prime only detect 12GB RAM instead of 16GB. There is hardware failure (1 of 4 memory is spoil). Unit have to be RMA.
Thanks,

Ask the Expert: One Management with Prime Infrastructure 1.2

With Tejas Shah
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions from Cisco expert Tejas Shah on One Management with Prime Infrastructure 1.2 Combining the wireless functionality of Cisco Prime Network Control System (NCS) with the wired functionality of Cisco Prime LAN Management Solution (LMS), Cisco Prime Infrastructure simplifies and automates many of the day-to-day tasks associated with maintaining and managing the end-to-end network infrastructure from a single pane of glass. The new converged solution delivers all of the existing wireless capabilities for RF management, user access visibility, reporting, and troubleshooting along with wired lifecycle functions such as discovery, inventory, configuration and image management, automated deployment, compliance reporting, integrated best practices, and reporting.
Tejas Shah is a senior technical marketing engineer for Cisco Prime Infrastructure and Collaboration products. He has deployed Cisco Prime Collaboration Manager at various customer sites to help customers monitor and troubleshoot their video infrastructure. In addition, he is part of the Network Operations Center team at Cisco Live events for six years. Shah joined Cisco in 1995 and was in the Technical Assistance Center team supporting various network management system products for more than six years.
Remember to use the rating system to let Tejas know if you have received an adequate response.
Tejas might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Wireless Mobility sub-community discussion forum shortly after the event. This event lasts through Sept 21, 2012. Visit this forum often to view responses to your questions and the questions of other community members.

Raun, please see my responses inline:
Can you go over the licensing method with Prime Infrastructure 1.2 please?
Raun, you can check out the following link for ordering guide at
http://www.cisco.com/en/US/products/ps12239/products_data_sheets_list.html
I currently have NCS and do NOT currently have LMS. I know I can move to Prime Infrastructure through Cisco Product Upgrade Tool. However, what I am confused about is do I still have to buy LMS to have LMS functionality in Prime Infrastructure 1.2?
==> Not at all. The converged product will give you basic management capability for routers and switches that LMS provided in this release. Feature/Functionality will keep on growing with upcoming releases.
If not, do the licenses I transfer into Prime Infrastructure 1.2 from NCS also work for devices to work under LMS?
==> Licensing is different than NCS or LMS. You don't have to transfer the license. Each install of Prime Infrastructure will have a unique UID string on which the licenses are based. A new license will be applied to the product.
Mean, can my currently 350 licenses be used for AP's as in NCS and routers in the LMS portion of Prime Infrastructure 1.2?
==> I would recommend getting a total count of your wired and wireless devices and match the right SKU based on that.
Hope this helps.. Let me know if you have any further questions,
Tejas

Cisco prime infrastructure 1.1 issue

hi：
i purchase a R-PI-1.1-K9 with R-PI-1.1-100-K9,but now i find the cisco website can't download Prime infrastructure 1.1 anywhare,only 1.2 and above version exist.but the device base licences(R-PI-1.1-100-K9) is based RI version 1.1.how do we resolve this issue.somebody tell me that R-PI-1.1-100-K9 can use in prime infrastructure 1.2 ,anyone can help me and tell me how to use it and give me the step by step guide,thanks very well.
jerry

A 1.1 license file should work with PI 1.2. See the note at the bottom of Table 3 here.
Hopefully your product was ordered with Software ApplicationSupport with Upgrade (SASU) option. That will further entitle you to upgrade to PI 1.3 and, soon, to PI 2.0. Each release ins incrementally more functional and many bug fixes are incorporated.

Installing Prime Infrastructure

Hi All,
I have a question about the installation of prime infrastructure.
We have ordered prime infrastructure 1.1, after ordering we received 3 PAK codes. The goal is to install the LMS 4.2.
- L-PILMS42-100 Prime Infrastructure LMS 4.2 - 100 Device Base Lic
- L-PINCS11-100 Prime Infrastructure NCS 1.1 - 100 Device Base Lic
- L-PINCSW11-100 Prime Infrastructure NCS WAN 1.1 - 100 Device Base Lic
If I'm not mistaken, we can install all 3 applications, but not on the same machine? Is that correct? And how do you choose to install LMS or NCS?
When deploying the OVA file? Where can you choose to use LMS or NCS?
Or is it the same OVA file for each application and does it unlock features depending on which license file you enter in the web interface?
Thanks,
Best Regards,
Joris

Prime Infrastructure NCS 1.1 dropped the NCS name when they moved to version 1.2 (and now at 1.3). That's the second item in your original post. The 1.1 license will still be good when you upgrade to 1.3. In fact, if it's a brand new installation, you might as well start with 1.3. You can download the image from www.cisco.com/go/nmsevals and apply your 1.1 license.
Prime LMS as noted above uses its own separate license and runs on its own separate server / VM.
There's no proper product name "Prime Infrastructure LMS" though some docs may mistakenly call it that. "Cisco Prime" is the new sweeping name for a set of complimentary products developed around a loosely common architecture and look and feel. It includes Prime Infrastructure (PI), Prime LMS, Prime Security Manager (PRSM), etc.
Prime Infrastructure NCS WAN 1.1 was a one timeproduct release designed for custoemrs with some specific needs for wired infrastructure management and without having LMS. It wil not be developed further and if you have LMS there's no need to install and operate the PI NCS WAN product.

Prime Infrastructure 2.0 sync config tasks

Hi,
I'd like to know few things about PI 2.0 config handling:
1. Can PI save running config to startup config on a scheduled basis? Let's say once a week on all devices.
2. Can PI save running config to startup config whatsoever?
3. Can PI download running config when it receives a config trap from device when user enters/exits config mode?
4. Can PI export running and startup configs to a external location?
Thanks!

Hi ,
1.
*Scheduled-You can schedule when Prime Infrastructure collects the configurations of
selected devices and specify recurring collections by selecting Operate > Configuration
Archives, then clicking Schedule Archive.
like minute ..daily etc...
3. ASAI K ,this feature work on the bases of syslogs .. we do not have complete support in PI 2.0 yet so I think bases on config chnage syslogs or traps ,config will not be fetched.
4. for tihs check the below thread:
https://supportforums.cisco.com/message/3975460#3975460
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Prime Infrastructure dashlet sort order

In WCS you could sort ascending and descending in the AP Uptime and CAPWAP Uptime dashlets.
In Prime Infrastructure you cant change the sort order, it is always descending. I think it is much more useful to see which AP that has rebooted last than to see wich one that has the longest uptime.
Anyone who knows if it is possible to change this?
( I know that I can create reports of AP Uptime that can be sorted ascending, but I want it on a dashlet )

Hi Shantha,
Thanks again for your support. I really appreciate it.
I kindly need your help again.
I am having issues with cisco prime device:
I can't connect to it via the web management interface
It takes several attempts to boot the device... most cases it hangs in the initial stages of booting. At times it is able to boot into console mode.
Regards,
Tioluwani

Migrate from WCS 7.0 to Prime Infrastructure 1.2

Hi All,
I am looking for advice on the licensing and upgrade path for going from WCS 7.0 to PI 1.2.
At present I have a WCS licensed for 200 APs which is managing one controller and 150 APs.
I intend to use the Cisco Prime Upgrade Promotion
to order R-W-PI12-M-K9 (WCS 7.0 to Cisco Prime Infrastructure 1.2 Migration)
and L-W-PI12-100-M and L-W-PI12-100-M to match the number of licenses on the WCS.
Once Prime is installed I also want to manage another 50 devices, does that mean I have to purchase the
Cisco PI 1.2 Base License and Software (R-PI12-Base-K9) and another 50 Lifecycle licenses, or will
my existing 200 licenses from the upgrade suffice.
Sorry if it's confusing, but I didn't invent the licensing structure just trying to make sense of it all.
TIA

You'll be able to manage up to 200 devices/APs simpy using the upgrade from WCS to PI 1.2 as you described it. No need to order another base license or 50 lifecycle licenses.

WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade

Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
Jelena

Hello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl           restoreDBTableMig.pl restoreJRMMig.pl      restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
     USER ID is ..................................... : sysadmin
     OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
     Generation to be restored is ................... : 0
     Backup taken from............................... : /opt/BKP/
     Common Services version in the backup data is... : 3.3.1
     Common Services is installed in................. : /opt/CSCOpx
     The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
     Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
     Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
     WARNING: The list of applications installed on this CiscoWorks server does not match the list of
              applications in the backup archive. If you restore data from this backup archive,it may
              cause problems in the CiscoWorks applications.
              Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
     Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
     Available disk space in NMSROOT................. : 86451488 Kb
     Required disk space in NMSROOT.................. : 35906524 Kb
     (The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
          Cross Platform Update started.
          Cross Platform Update completed.
          License check started.
             WARNING: The license details in the server are different from the backup data.
                      After restoring, please check the license available in the server.
             WARNING: Your current license count is lower than your earlier license count.
                      If you restore the data now, devices that exceed the current licence count
                      will be moved to Suspended state.
          License check completed.
          Restoring certificate.
             WARNING: Cannot evaluate the hostname, hence the certificate
                      may be from this host or another host.
                      [ Certificate not overwritten ]
          Restored Certificate.
          Restoring Common Services database.
          Restored Common Services database.
          Restoring CMIC data.
          Restored CMIC data.
          Restoring CMC data.
          Restored CMC data.
          Restoring Security Settings.
          Restored Security Settings.
          Restoring DCR data.
          Restored DCR data.
          Restoring Certificate key store.
          Restored Certificate key store.
Restoring DCNM CrossLaunch data.
          Restored DCNM CrossLaunch function.
          Restoring JAAS configuration.
          Restored JAAS configuration.
          JRM Job Migration started.
          JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
          Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
        10% of IPM Restore Completed
        30% of IPM Restore Completed
        50% of IPM Restore Completed
        60% of IPM Restore Completed
        70% of IPM Restore Completed
        100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena

WCS to prime infrastructure 1.2

Hello,
I need to know how to do the upgrade from WCS 7.0 to Prime Infrastructure 1.2.
I was reading and i need to upgrade to the NCS 1.1 before to go to prime infrastructure 1.2.
I will need license to NCS 1.1 before upgrade to infraesctructure 1.2 ?
Will i have some problem with this upgrade ?
Can someone pass me the correct process for not have any problem with this upgrade ?
Thank You.

Just to add...
Leo like to tease people with new stuff
That is the correct path though. You will have to be first on 7.0.220.0 if your planning on exporting and importing the day from WCS to NCS 1.1. From there you will upgrade to Prime 1.2 and then you can upgrade to Prime 2.0 whenever it comes out. I would build the NCS server with the specs for Prime though.
Just follow the configuration guide for WCS to NCS and then follow this for NCS to Prime
https://supportforums.cisco.com/docs/DOC-26972
Sent from Cisco Technical Support iPhone App

Can i install Cisco prime infrastructure 1.3 with 1.1 license.

Can i install Cisco prime infrastructure 1.3 with 1.1 license.To be more precise it will be fresh installation
but the licenses I have is of 1.1.As per my overview from Cisco prime Infrastructure 1.2 NCS and NCS(WAN)
has been bundled into one service.But both were seperate entities in Cisco Prime Infrastructure 1.1.

It doesn't matter if you want to make a new installation or an upgrade. The questions is the license.
The base license is necessary for network management nodes (devices). But to get updates for your system you need the additional to your Base License the Lifecycle License (which can be ordered for 12, 24 or 36 months).
The Lifycycle License is also based on the number of managed devices. In your case 50 devices. So you have that License - congratulations!
Otherwise order the Lifecycle License for 50 devices (L-N-PI12-50-M). This generates CON-PSUU-PI12LF50 for 12 months, list price 414,81$. Then Upgrade from 1.1 to 1.2, patch the system and upgrade to 1.3.
Have fun,
Chris

Cisco Prime Infrastructure and VMware 5.5 Cluster

Hi ,
We Installed Cisco Prime Infrastructure 2.2 on VMware 5.5 in Cluster Environment. When we disable the HA Admission Control Policy VM Start without error. If We enable the Admission Control We are getting Insufficient Resource available for HA.
Any idea.
Thanks

Hi
can you copy & paste exact error what you're getting here?
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information

Difference between cisco prime infrastructure and cisco WCS

Can you explain me difference between cisco prime infrastructure and cisco WCS.. I'm little bit confuse...
Thanks..

Hi Hasan,
In terms of features...You can say PI is more advanced version of WCS and NCS. All the stuff possible in WCS/NCS can be done on PI as well.
But from the architecture perspective , there are differences. If I remember correctly , WCS is based on 32 bit OS while NCS and PI based on 64 bit OS. For the same reason you cannot do inline upgrade from WCS to PI via any path and will have to change the platform/Hardware itself before moving to PI. However , inline upgrade from NCS to PI is possible if we follow the correct path.
Regards
Dhiresh
**Please rate helpful posts**

Can't import images in cisco prime infrastructure 1.2

- Any job , trying to import images, in my cisco prime infrastructure fails with :
Jan 14 13:14:53 cisco-prime 01/14/13 13:15:18.040 ERROR [service] [pool-4-thread-19] IFM_SWIM_EXCEPTION: [com.cisco.ifm.swim.service.exception.IfmSwimParserException: Cannot populate software image info object from the image.]
How I can I solve this one ?
Tx,
M.

I seem to have the same problem, strangely enough importing a universal image for 2960s worked fine, but I get thos error when trying to import a 3750x image

Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture

My Cisco Prime Infrastructure ver. 1.2.1.12
Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture.
Please let me know how to access or enable the feature.
Thanks,
Tek

This is by no means a full solution, but deleting and re-adding only takes a few minutes if you use the "Export Device" and "Bulk Import" features from the Device Work Center. You can export the desired devices to a CSV file, delete them, then import from the CSV.
Of course, you might lose historical data when deleting the devices, but I'm guessing that's not as relevant since the devices themselves have been replaced by different hardware.

Can I order Prime infrastructure Cluster?(wcs navigator)

Similar Messages

Maybe you are looking for