Can I Overclocking MSI B85M-G43
Can I Overclocking MSI B85M-G43 with Intel Pentium G3258? I'm A Starter....
You should be able to, with BIOS v3.7 or maybe later though there is no mention of it on support page.
Similar Messages
-
MSI B85M-G43 can't install Windows 7. Hard disk not detected.
Hi,
I just built a new computer for the first time. I followed the instructions and did everything correctly. but am unable to install Windows 7 Ultimate 64bit. Hard disk isn't always detected during the installation.
But when it appeared in the "Where do you want to install Windows" list along with system, I tried to format the hard disk and got a message "Failed to format the select partition. [Error 0x80070057]."
Then I restarted the computer, the hard disk no longer displayed in the list, so I put motherboard driver disc and clicked on Load Driver and opened Storage\Intel\PCH_12.0\f6flpy-x64. It loaded, then I got a message saying "To continue installation, use the Load Driver option to install 32-bit and signed 64-bit drivers. Installing an unsigned 64-bit device driver is not supported and might result in an unusable Windows installation."
I restarted again and disabled Driver Signature Enforcement, but it didn't help. I still got the same message.
In the computer case I have these devices:
- MSI B85M-G43, Socket-1150
- Intel Core i5-4430 Processor
- Corsair Vengeance DDR3 1600MHz 8GB
- MSI GeForce GTX 650Ti BOOST 1GB
- Cooler Master GX 550W PSU
- WD Desktop Green 1TB
- SuperMulti 16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive
Everything is plugged in correctly. Hard disk connector plugged in SATA 1 and DVD -> SATA 2.
The installation is pretty slow, regardless if i install it via USB or x16 DVD. All except DVD and hard disk are disabled. It's also worth to mention that even DVD and USB aren't always detected in the click BIOS.
So I'm wondering if anyone here can help me? ThanksHi and
1: What BIOS version you have? .. Have you tryed to downgrade/upgrade it already?
2: Have you tryed it in those SATA 2 ports? ...is it same strory?
- On SATA there aint any master or Slave like on IDE so if you are under same controller it dosent mutter what port you use on what device.
Note: SATA 3 Ports are faster then SATA2 ports, but even SATA 1 can handel your DVD or HDD. So no lose if you need to use SATA 2 ports.
Hope this get you foward! Cheers Mummy -
MSI B85M-G43 could not detect Gigabyte R929OC 4GB 3X Windforce
I recently build a new PC a month ago and have been using it for 3 weeks then random black screens problem started to occur.
It started right around the time after I updated to catalyst 14.4 w/o the beta. At the same time i noticed windows update has updated some files which i did not note down what it was. Also Noticed that startup list had some new programs running.
I proceeded to disable the programs in startup, undo the latest windows update and finally reinstalled windows 8.1
Nothin works and I am left with black screen, which i realised that to be actually the mobo not detecting the card once i got a vga screen plugged in to mobo onboard graphics and went to BIOs to see.
Previously my BIOs were updated to latest through the liveupdate 5 program, which itself updated to liveupdate 6. For some reason I dont like programmes sitting at the back constantly checking for updates, so after updating those, I deleted all those programs. The updates also took forever to download, I figured i will download/install individually in future. Now that I do a search there is no live update 6?
Just to make sure, I have reflashed the BIOs to E7823IMS v3.6 again through the m-flash inside BIOs, but did not choose the BIOs + ME option as i dont know what it is. After reboot, BIOs version remained there, checked for ME and there's the version number 9.0.21.1462.
BIOs version: E7823IMS v3.6
ME version: 9.0.21.1462
Prior to the Win8.1 reinstall, my OS was sitting on my SSD in non UEFI mode, I chose to install in non-uefi as i dont know what it was then. When i tried to reinstall, somehow the boot priority identified the SSD as UEFI first, so i wanted to give it a try and proceeded to install win8.1 in UEFI until reboot failed. Then I decided to installed my win8.1 on my HD in non UEFI instead. The system, as usual, works using the integrated graphics and mobo could not detect the graphics card in the only PCIe 3.0 x16 slot. Should I plug it into the PCIe 2.0 x16 slot and try, It never occur to me until now as I thought that was the only slot my graphics card could use.
Please help
Here are my specs:
MSI B85M-G43
Intel i7-4770 3.4GHz
G.Skill Ripjaw 1600MHz (2 x 8)MB Blue
SSD Samsung Evolution 240GB
WD 1TB Blue
Gigabyte R929OC 4GB 3X Windforce
LG 24x DVD Writer
Corsair Carbide Air 540 Case
SeaSonic G-750 80+ GOLD Power Supply
ASUS PCE-N53 PCI-E Adapter
Windows 8.1 OEM
Qnix QX2710 Evolution II 27" matte PLS monitor (uses dual-DVI-D connector only)try to update your bios again but use the BIOS + ME option as it will flash not only your bios but Intel ME at the same time.
Note: Don't remove your USB during bios flash as the system will restart for I think around 2 times and plugging out USB might kill the MB bios.
Did you modify any settings in the bios setup??
If updating bios not can't work, try to plug your card to second PCIE slot and see if it could boot or not. -
Msi B85M-G43, pci simple communications driver? Where is it?
I looked up the product but there are too many driver choices, does someone know which one it is or if it would be ok to re-download all of the drivers, I just build a new pc and am a noob when it comes to setting up all the drivers.
Specs:
Intel core i5 4430
B85M-G43 mobo
Sapphire radeon R9 270x @ GB GPU
G skill ripjaws ram 2x4 GB
Corsair cx600 psu
Windows 8.1here it is:
http://download.msi.com/dvr_exe/intel_amt10_mb.zip -
MOVED: Can't overclock MSI 660 TI power edition
This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=167176.0Quote from: hurricane28
I know that no card is the same that's not the issue and like i said this card is a great card.
But can you tell me than why is it that when i looked at reviews they get 150+ on the clock and mem +600 when people who bought this card only manage to get in between +20 to +50? they did not use the aux voltage.
Quote from: flobelix on 10-March-13, 21:40:22
Overclocking is a matter of the individual sample. Some cards of the same model might clock great while others won't.
Quote from: hurricane28
I heard that the first cards would be able to put more volts but the later cards having volt locks because its high potential?
If so could i get the older bios versions of that card or get another bios on my card?
It just don't seen fair that the first cards could overclock way better than the latest cards.
and it is not that some cards are better ans some are not because this is my second card i get because i was thinking it was broken because of my problems.
Nvidia forced all card manufactures including MSI to remove GPU overvoltage above 1.175v. It has nothing to do with potential but Nvidia dictating to stop overvoltage. MSI is therefor not allowed to offer unlocked versions. Again overclocking is a matter of the individual sample and your 660ti PE is already higher clocked by default than most other manufacturer cards could do with manual oc. -
i was supposed to buy the model mentioned above a few weeks ago but had a few problems ...now im planning to buy it and have a few questions after reading customer reviews-
1.does the board support this memory-Corsair DDR3 4 GB(1 x 4GB) PC RAM (CMV4GX3M1A1600C11)?also, if i install one of these now and another(same one)later will they work together properly?
2.i saw that the msi gtx 750 2gb oc edition(i have this one) is not in the MB's vga support list...is it really not supported?
3.i have a seagate barracuda 5400 rpm attached to my current ms 7525 mobo....will the hard drive be compatible with a newer SATA 6 gbps?
4..does it have a slot for a dvd writer(which is already inside the case) connection?
Thanks for the helpQuote from: grasen209 on 13-June-15, 13:51:50
got it...another thing-i have a retail win 7 ultimate...i know ill have to install windows again but can i custom install it to a partition without having to delete the rest of my files?or do i have to format the whole disk?
Upgrading from Windows XP (probably Windows 7 Home etc.) should also be possible
Depend on what you had before, you may not need to format the whole disk but you will at least need to delete the windows directory an Programs/Programs(x86) (somehow, this cannot be done from windows). -
MOVED: Msi B85M-G43, pci simple communications driver? Where is it?
This topic has been moved to MSI Intel boards.
https://forum-en.msi.com/index.php?topic=183830.0here it is:
http://download.msi.com/dvr_exe/intel_amt10_mb.zip -
Re: dmidecode reports more PCI slots than available in MSI B85M-G43 motherboard
Odd then that it shows correct info for those slots on my MB and not yours.
Quote from: cmplieger on Today at 19:44:28Have you tried with windows 10 drivers or with 8.1 drivers?
Have you tried using the versions in this thread?
I would recommend to uninstall nahimic and the realtek suite ... -
Can I OC on a MSI H77MA-G43?
HI, i have a question about this board
I won it and now im curious is it possible to OC on it at all?
I've seen a lot of people claiming its not possible on H77 motherboard or only up to turbo multi level, is that true?
Also why does MSI promote 36% OC on this mobo, does it work or not, im planing to go I7 3770K and hopefully OC to ~ 4.5ghz.
Quote
OC Genie II provides an instant performance boost, optimizing CPU, memory, integrated graphics, and storage device performance with the function enabled.
Benefits:
- Overclock in one second
- At least 36% boost in 3D gaming performance
- Simple and easy – No need for complex BIOS setting and extra equipment
http://www.msi.com/product/mb/H77MA-G43.htmlThe H series boards are limited to BCLK changes only and the CPU turbo in terms of CPU. The integrated GPU can be overclocked quite a bit.
If CPU OC'ing is intended then a Z series board is required. For the H series boards, a "K" series CPU is a waste.
See this article http://www.anandtech.com/show/4830/intels-ivy-bridge-architecture-exposed -
First PC Build: MSI P67A-G43 - Can't Boot From Windows 7 DVD
MB: MSI P67A-G43
HD: Seagate 1TB
DVD: HP 1260
CPU: Intel i5 2500K
I just built my first PC. In the BIOS I had it set to boot first from my DVD drive that has a 64-bit version of Windows 7 loaded. No matter what I tried, I received the message: "Reboot and Select Proper Boot Device"
So I have been on the phone with technical support, and they suggested I download a driver update, which I found HERE.
I have tried installing both the driver and the BIOS updates, but every time it says that the boot from the pen drive failed and to check the USB drive and ROM.
I've looked for answers all over the web, but the only ones I find assume that you've previously had Windows installed. This is a first boot though, and I really don't know what to do next. Can anyone help with this?
thanks!If anyone would like to take a look at these OC settings that are default with my board as to a reason why it wouldn't be booting from the DVD drive or accepting the RAM, I would appreciate it.
urrent CPU Frequency: 100.00 x 33 MHz
Current DRAM Frequency: 1600 MHz
CPU Base Frequency [10kHz]: 10000
Adjust CPU Ratio: [33]
Adjusted CPU Frequency: 3300 MHz
Adjust CPU Ratio in OS: Disabled
Internal PLL Overvoltage: Auto
EIST: Enabled
Intel Turbo Boost: Enabled
OC Genie Button Operation: Disabled
DRAM Frequency: Auto
X.M.P. Disabled
Adjusted DRAM Frequency: 1600 MHz
DRAM Timing Mode: Auto
Spread Spectrum: Enabled
VDroop Control: Auto
CPU Core Voltage: Auto
DRAM Voltage: Auto
PCH 1.05 Auto
Then under CPU Features:
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Tech: Disabled
Intel VT-D Tech: Disabled
Power Technology: Custom
C1E Support: Disabled
Overspeed Protection: Enabled
Intel C-State: Enabled
Package C State Limit: Auto
Long duration power limit (w): 95
Long duration maintained (ms): 1000
Short duration power limit (w): 0
1-core ratio limit: 37
2-core ratio limit: 36
3-core ratio limit: 35
4-core ratio limit: 34 -
Help: can't overclock Q9300 - MSI P7N SLI Platinum !
I tryed everything, i just can't overclock Q9300...way ?. tryed alle beta bios..please help !!
Overclock only to 340 makes PC freeze
MSI P7N-SLI PLATINUM nForce 750i SLI
Intel Core 2 Quad Q9300 2.5GHz 6MB FSB1333
Arctic Freezer 7 Pro socket 775
Corsair DDR2 PC2-800 2GB CL4 kit XMS2 * 2 = 4 GB
Samsung Spinpoint T166 320GB 16MB 7200RPM SATAII
Asus GeForce PCI-E 8800GT 512MB
Antec Sonata 3 Earthwatt 500Watt HD + eSata front
All bios here i have tryed, but no luck:
http://forums.hardwarezone.com.sg/showpost.php?p=27386192&postcount=5
Somebody had luck to overclock Q9300 on P7N-SLI Platinum ? please post infoTry with mem settings auto and only adjust Vdimm to vendorspecs.
Did you try BIOS V1.1 from MSI : http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1373
This did solve some memory issues.
If so try, if you can, QVL memory and see if problem persists.
Hope this helps , good luck and keep us posted
Also be sure that your on manual and not linked, this will give problems too, when fsb divider gets higher then memory divider.
Furthermore, by using non qvl mem, the NB and fsb vtt are very depending on eachother.
I had the same with my board , the only difference with yours is the cirque pipe cooling and an extra chip for yorkfield support , but it is do-able -
MSI Z87-G43 can't control fan speed
Hi, i just bought an MSI Z87-G43 and i'm using a i5-4670 on it (yeah, 4670 without the K).
I wanted the minimum noise as possible so i bought a Noctua NH-U12P SE2
Like the pictures shows it has 2 fans.
I connected the 2 fans on cpu1 and cpu2 fan and both BIOS and Commander Center can see them correctly, but both of them can't change the rotation speed.
Those fans have a 3 pins connector.
How can i do it? Now my CPU is cool and i like it, but a little more hot for a little less noise is a good deal (and my goal!)
thank youAs alternative you can get a fan controller like Sunbeamtech Rheosmart PCI Fan Controller, it should allow to use 4pin PWM singnal and convert it into voltage control,
Quote
Product Details:
Smart Way Controlling all Fans & Airflow. The Rheosmart PCI Fan Controller is designed to make any existing 3-pin fan automatically regularized by the PWM signal from the Motherboard! With its ability to connect two fans to a single PWM connector at a maximum of 20W/channel, a wide selection of fans can be supported. When a normal fan is connected to the Rheosmart PCI Fan Controller, they become auto adjusting through the PWM signal.
The Rheosmart PCI Fan Controller operates in two different modes; when connected to a PWM-enabled motherboard you can allow the system to auto-adjust fan speed through he motherboard's temperature sensor. When switched onto manual mode by the pushing of the lever-switch to the right, you turn the connected fan onto manual control mode. -
Can i crossfire two radeon 7950's with msi Z77A-G43
Im looking to buy MSI's version of the Radeon 7950 twin Frozr to complete my system but im not sure if i will eventually be able to crossfire two of these cards in the future. I know that this MB only has one PCIe3 slots. Does this matter in crossfire? or will I have to replace the MB in order to corssfire?
MSI Z77A-G43
8gb Corsair Vengence
600 Watt Corsair PSU
Intel Core i5 3770k Oc's at 4.2 ghz
500 gb Western Digital HDD
Cooler Master hyper EVO 212that should work but at PCI-E REV 2.0 speeds just make sure you have gen 3 support turned off or it will not allow crossfire!
-
MSI H87-G43 Gaming VGA Boost?
I'm not good at English
MSI H87-G43 Gaming
Question
1.Is "VGA Boost" feature = overclocking?
2.Can MSI VGA Boost feature work with other brand graphics card? or it only work with MSI Graphics card ?
3.If I only play games with out overclocking which board should i buy for worthiness? MSI H87-G43 Gaming or MSI H87-G43
Thank youQuote
1.Is "VGA Boost" feature = overclocking?
Yes, although just a little oc.
Quote
2.Can MSI VGA Boost feature work with other brand graphics card? or it only work with MSI Graphics card ?
Only with MSI vgas of the Gaming series (= even other MSI vgas won't work)
Quote
3.If I only play games with out overclocking which board should i buy for worthiness? MSI H87-G43 Gaming or MSI H87-G43
Choose what you like. Both are H87 boards hence no cpu oc possible anyway. VGA boost is not really worth buying a board for. The Gaming board features other extras like Killer LAN and enhanced onboard sound. -
Hi all I'm thinking to buy mobo B85M-G43 along with celeron g1820.
The problem is that in CPU support list there is no celerons but in spec page I see this
Supports 4th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors for LGA 1150 socket
It is intresting because all other mobos with b85 seems to have celeron suppot in official msi cpu list.
If there is some tech guy form msi in this forum could you check this?
And if this mobo doesn't support this cpu what all you could recommend with similar price and features?
ThanksIf no one here can assist at this stage, then you can always address your query here. http://us.msi.com/service/PreSaleForm/
Maybe you are looking for
-
Database does not contain a URL for the file
How do I find out what file/update this is: The file digest/hash does not exist in the SUSDB, but I have no idea looking at the windowsupdate or softwaredistribution.log what file it is referring to. SELECT [FileDigest] ,[DigestAlgorithm]
-
How to Change financial trasnactin for commitment item for which no trasnaction has been posted
Hi , 1. \We re in process to Go live for he FUND Management module for Power generation business, while we create all FM master data and budget structure we found a mistake in NONBUDGET commitment items. we wrongly mapped financial transaction 30, w
-
How can I convert a .pdf file to an Indesign CC file which is editable?
How can I convert a .pdf file to an Indesign CC file which is editable?
-
Sometimes of late when I start my MacBookPro fine white vertical lines appear across the monitor. A Restart typically gets rid of them. Cause? Solutions? Thanks, RS
-
Every time I turn on my computer I get the message that there's something wrong with squlite3_wal_checkpoint in SQLite3.dll and I can't update iTunes/Quicktime anymore. As far as I know, I haven't done anything at all to cause this problem. What can