Can I partition 256gb ssd and 1tb hard drive to be split 50 / 50 for Mac OS and windows?

I am going to buy a new iMac. The question is which storage option? If I get the 256GB ssd and the 1TB option, it appears the mac OS is pre installed on the ssd which is great. I would then like to install windows 7 on the ssd using bootcamp, and partitioning the ssd to be half for mac and half windows. I think this is the best thing to do... Correct? My main concern is then can I also split the 1 TB hard drive as well? Ideally I would like to split both drives 50 / 50, install the operating systems and software on the ssd and use the hard drive as general storage. I have read mixed reports on the possibilities of this and would really appreciate your help and advice. I am not that technical and would like to avoid using third party software, and stick to bootcamp if possible.
Thanks all!

I suggest you open Boot Camp Assistant and click on the button to print the documentation. Read it carefully before using BCA. BCA only creates the partition. It does not format it. That is done with the Windows installer at the beginning of the Windows installation.
Although Windows can r/w NTFS volumes OS X can only read them. That means you can copy files from the Windows boot volume but not write files to it. If you need to move files to and from the Windows system you would use the data volume you will set up on the HDD. If you don't need to use files larger than 4 GBs in Windows then FAT32 is fine. Using ExFAT would only be advisable if you anticipate the need to handle files larger than the 4 GB limit of FAT32.

Similar Messages

Is it wise/ok to use and external hard drive that requires Tuxera NTFS for Mac.dmg to be installed?

I had a white screen issue twice recently and freaked out. I got everything back but worried now that my imac will crash and I will lose
all my files/pictures. I purchased an external hard drive, a Toshiba Canvio 3.0 Plus with 1TB to install to backup my files. I went to
install it and it says that for Mac you must install Tuxera NTFS for Mac.dmg, which says it enables read/write support for the NTFS
partition on your Mac. Is this a good way to back of files on a Mac? If not what is better? Is there an Apple product for back up?
Please help I am clueless and worried about the dreaded white screen!

sketchgirl wrote:
I purchased an external hard drive, a Toshiba Canvio 3.0 Plus with 1TB to install to backup my files. I went to
install it and it says that for Mac you must install Tuxera NTFS for Mac.dmg, which says it enables read/write support for the NTFS
partition on your Mac.
Depending on whether you need to use this as a boot drive and what model iMac you have (PPC or Intel) you will need to reformat the drive as a GUID or APS drive with Disk Utility. OSX Tips: Using Disk Utility: Format, Erase, or Reformat a Drive

I just bought a new mac book pro 13'' and i bought a toshiba 1tb hard drive aswell, i formatted it to mac but it will not show up on my tv so i can watch movies? and solutions or reasons why?

i just bought a new mac book pro 13'' and i bought a toshiba 1tb hard drive aswell, i formatted it to mac but it will not show up on my tv so i can watch movies? and solutions or reasons why?

TVs don't support "Mac OS Extended (Journaled)", so you will probably have to use FAT32. To format the external drive, follow the same steps as you did to format it with "Mac OS Extended (Journaled), but in the erasing screen, select "MS-DOS (FAT)" as "Format". Note that FAT32 isn't compatible with files bigger than 4 GB. Also, you may have to format the external drive in a PC

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

How do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled.

Can the G4 MDD support internal 1TB hard drives

Hi all
I want to add more storage to my G4 Mirror Door. Can my G4 MDD support internal 1TB hard drives? Will I need to buy a PCI hard drive controller card?
Thanks
Web dude

Can you use a larger drive (500GB) on the ATA 66 bus as well as the ATA 100? I have a 750GB on the ATA bus, but have gotten conflicting answers from Mac pros regarding the size drive that will work in the ATA 66 bus. I have a
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 2
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1.75 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.4.8f2

Use of 256GB SSD with 2TB hard drive

What is the best way to do this? Everything just gets saved to the SSD. How san I set it up to save things to the 2 TB hard drive automatically. I think that I want Documents, iTunes files and iPhoto files on the 2 TB. Need advice

What you do is move your Home folder to the HDD, then open Accounts (Snow Leopard) or Users & Groups (Lion), click on the lock icon to authenticate, select your admin account, CTRL- or RIGHT-click on your account and select Advanced Options from the contextual menu.
You will see a field labeled, "Home directory," that has a Choose button on the right. Click on that button and navigate to the Home folder on your HDD, select it, and click on the Open button. Click on the OK button and immediately restart the computer.
After the restart your computer will be using the Home folder on the HDD instead of the one on the SSD. You can now delete the contents of the Documents, Downloads, Movies, Music, Pictures, and Sites folders in the old Home folder on the SSD. This will free up that space.

My external Hard Drive won't transfer files to Mac HD and causes Finder to crash

My external Hard Drive (Western Digital 2TB hard drive in a ICYBOX 2-bay USB 2.0 HD Dock) won't transfer files to the Mac HD. The transfer box comes up but stays at the 'estimating time' stage and remains like that. No matter how big the file/group of files are (biggest I've tried was only 500-odd MB) it won't transfer and stays at the 'estimating time' stage. When I try and stop the transfer, the transfer box remains at the 'stopping' stage until I restart the iMac. I can access other programs during this 'stopping' stage, as long as it doesn't involve the External HD.
When I attempt to open files from the External HD in Photoshop CS4, both Photoshop and Finder stop responding and have I have to 'Force Quit'. However, upon force quitting finder, I loose all icons on the desktop until I restart the Mac via holding down the 'Power' button on the back.
Ive looked at a few forums already and done a couple things they suggested to similar topics.
- I excluded the Ext HD on the Spotlight>Privacy tab.
- I verified the Ext HD via System Utilities. Some errors came up but the Repair was successful and subsequent Verifications have returned as 'OK'.
- I tried the Mac Diagnostic tool as suggested by Apple, but when I press the 'D' key on start up nothing happens.
The annoying thing is that this problem came out of the blue, the Ext HD was working fine 3 days ago.
My system:
iMac 21.5inch, mid 2010
3.6GHz Intel Core i5
8GB 1333 MHz DDR3
OS X 10.9.5 (13F34)
The Ext HD:
Western Digital 2TB
Mac OS Extended (Journalised)
1.91TB available on the HD
Shares a 2 Bay ICYBOX dock with another 2TB WD HD
Connected to the iMac via USB 2.0 to a 4-port USB 2.0 hub
Any help suggestions would be greatly appreciated.
Cheers,
Tom

WD EHDs have an extremely high failure rate so don't be shocked if it is failing. However what you can do first is reset the SMC and PRAM first on the computer, do the SMC reset 2-3 times, sometimes the first try does not work. If this does not work then using another computer move the files to another EHD, this time buy a high quality HD, something like one of these

PC hard drive died and I have replaced it. Need to import the music on my iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto new hard drive? Senuti's just for macs.No old hard drive to copy.

My PC hard drive died and I have replaced it. Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)

See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock

Managing 250 GB Solid State Hard Drive and 1TB Hard Drive

Just received our new 27" iMac with 2 internal HD, one being the 250 GB SSHD and the other a 1TB HD.
The system came with everything loaded on the SS and when I transferred files from our old G4, they also went on the SSHD, obviously it is getting full.
How do I best manage the 1TB HD and move files and documents over to it? How do I move the iTune files? Can I move the desktop files? etc.
Thanks,

How do I best manage the 1TB HD and move files and documents over to it?
Drag documents over. If you want to move the entire OS X installation, use a program such as Carbon Copy Cloner.
How do I move the iTune files?
Drag it over from the Music item of the Finder's sidebar, launch iTunes with the Option key held down, and point it there. The same method works for iPhoto.
Can I move the desktop files?
Yes.
(53441)

Losing the will - Bay 2 1TB Hard Drive can't install Vista AT ALL!

I have a new Mac Pro and installed a Samsung Spinpoint F1 1TB hard drive in bay 2, solely for a Vista install (for editing AVCHD in Sony Vegas) but I cannot under any circumstances, install Vista on any partition, be it the full, halved, any combination at all - you name it, I can't install.
I get as far as the partition screen in Vista and his is where things slip up - I have had the Boot Camp partition (only on a split, never on the single partition) and it just will not let me install. Not under any circumstance.
This is appalling, I have been onto Apple who have escelated it to one of their engineers, he did not have a clue. Way to go.
So, I was wondering if anybody had any ideas or has experienced this?
BTW, I have not tried to install to the OS hard drive yet - don't really want to mess with it.
TIA

There are a number of things you can do, but in every case, you have to delete any FAT partition, create NTFS before you can install. In some cases, a restart from Vista DVD is required before it proceeds.
In one instance, I had to remove the OS X drive, but that may be why some jump to wrong conclusion about drive bays making a difference - they don't.
You got it installed so you must have been at least somewhat successful.
I use Disk Utility to create and format the drive 99% of the time. If you are going to dedicate a drive to Vista, even multiple FAT/NTFS partitions, I would set the partition table (Partition: Options.... in Disk Utility) to Master Boot Record rather than GUID.
Let Windows do all the updates through multiple reboots before you insert the Leopard DVD to add Apple setup.exe services often called "BootCamp drivers."
BootCamp Assistant is unnecessary and I don't think well designed even yet for use on Mac Pro UNLESS you need to install Windows on the same drive as OS X, such as you find on iMac/MacBook series.
Vista DVDs are now available with SP1 already, which is what I would buy today if I was buying Vista.
say "had" because a couple of days down the line when I tried to boot into Vista, I was met with a black screen and flashing cursor.
Any hardware changes? installed drivers?
When you say you looked far and wide... I have been active here and on Mac Pro discussion and Vista issue.
There are also some good threads on MacRumors:
http://forums.macrumors.com/forumdisplay.php?f=1

NMH 405-can I install 1TB hard drives

I have a NMH 405 that currently has 1 500GB hard drive. Can I replace it with 2 1TB hard drives? Does the 405 support 1 TB drives? I can backup my current data onto a laptop, so data loss is not an issue. Thanks.

Yes. I've just fitted two Western Digital WD Red WD10EFRX 3.5" 1TB SATA 6.0Gb/s Hard Drives to mine and they appear to be working fine

Is it possible to put a 1TB hard drive disk in my mid 2009 13 inch macbook pro?

I want to upgrade my hard drive disk (macbook pro 13 inch mid 2009) from 160 GB to possibly a 1TB. If I bought a 1TB hard drive disk would it work in my computer and would apple install it for me? If not is there anywhere in manhattan thats an afiliate of apple that would do it? I checked out Ifixit.com and was looking at how to do it on my own but honestly I'd probably screw it up. Any help would be much appreciated.
Thanks
Pete Benedict

Helmet20 wrote:
If I bought a 1TB hard drive disk would it work in my computer
yes.
would apple install it for me? If not is there anywhere in manhattan thats an afiliate of apple that would do it?
they would not install a hard drive you purchased somewhere else, however I'm sure a computer repair shop in manhattan that would be willing to. If you are looking for an Apple affiliate, or an AASP, here: https://locate.apple.com/service/?pt=4&lat=40.7902778&lon=-73.95972219999999. Call them and ask if they would do it for you.

How can I tell how many GB my hard drive is?

how can I tell the size of my hard drive?
SS

Hey Seth,
Go under the apple and click on about this mac. Click on More Info...Under Hardware, Click on ATA, and then click on the options on the right. You can see what type of disc drive you have and the size and availability of your hard drive.
Eddie K.

Using an External Hard Drive vs. a separate computer for music producing

Hi all. I have a dilemma. I'm currently using logic express to make my music and its installed on my 13 inch macbook pro that I bought last year. Granted, it works fine, however I am looking to upgrade to Logic Studio soon as well as purchase Spectrasonic's Omisphere, which for those who don't know is about 50 gb of sounds. That on top of the 50 gb that come with Logic Studio means about 100 gb of software which I frankly don't have the room for on my macbook pro. I've been looking at buying a new mac mini, 2.3 ghz i5 with 8gb of RAM and a 500 gb Hard Drive, solely dedicated to making music. However, my friends tell me I should just buy an external hard drive and install Logic, as well as the software, on the hard drive since it will be far less expensive than buying a new computer. However, I don't know how I feel about installing software on an external hard drive. So my question is, given what I am trying to do, what is my best option? Are there issues with using an external hard drive for this sort of work that would make buying a seperate mac mini more practical, or vice versa?

If you want to do this in a cost-effective way, you should delete some files you don't need from your macbook pro to make room for logic pro. Even though Logic Pro has around 50 GB of stuff, most of it comes from the Jam Packs, which I'm guessing you won't really need to use...So make room for Logic Pro on your laptop and install it there...then use the external hard drive to store and record your music to.
If you're going to get a mac mini with that type of spec, you might as well buy a new macbook pro with the same specs and better.
Option #3, you can always upgrade your internal hard drive...there are plenty of sites on the net that shows tutorials and offers hard drives that have plenty of storage, faster speed, and you won't even need to purchase an external if you upgrade to at least a 1 TB, 7200 rpm hard drive.

Can I partition 256gb ssd and 1tb hard drive to be split 50 / 50 for Mac OS and windows?

Similar Messages

Maybe you are looking for