Can I partition an external drive into MSDO and MACOS extended and use under bootcamp ?

I am interested in using Windows 8 alongside my OSX MAVERICK with the Bootcamp 5 solution.
However, I am trying to save the space on my internal SSD . Can I partition my 4TB WD external drive into 3 parts like this :
1.5 TB dedicated for Time Machine in MAC OS Extended Format
1,5 TB MAC for general purpose in MAC OS Extended Format
1.0 TB Windows for my PC games and other stuff in exFAT for files larger than 4GB
Is this possible at all or what would be better ?
Thanks

To resize the drive do the following:
1. Open Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.

Similar Messages

  • Can I partition an external drive and install 10.6.8 so I can run some older software?

    I have older software that won't run on my 21.5 iMac. Can I partition a 3TB Lacie external drive, then install 10.6.8 on it so I can use the older software?

    The computer that I purchased did come with Parallels Desktop 10 for Mac, but I thought that was only for running some Windows software. Not a clue how to use it.
    I actually asked a similar question about installing the older system on the external drive when I talked to Apple yesterday. They guy said go ahead and try it! Huh?

  • Can i partition an external drive that im using for time machine? its not an actual apple TM....

    I'd like to partition my drive to make a separate place just for itunes music , is this possible? if so, how ?
    thanks!

    tamckellar wrote:
    im just trying to make a separate area on the ex drive that i use for tm, to store just my itunes library .
    Not a good idea...If that drive fails (and they All do at some point in time) you will lose both your TM and iTunes Backups.
    Invest in another EHD for iTunes.
    Moving iTunes >  http://support.apple.com/kb/HT1751
    Also...
    Have a look at these 2 Videos...
    http://macmost.com/moving-your-itunes-library.html
    http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

  • Can I partition an external drive without erasing data?

    Can I do this?
    Or do I need to have partitioned the drive to begin with in order to not lose my data?
    I need it to be a GUID partition map for booting...

    I need it to be a GUID partition map for booting
    That is a common misunderstanding. An Intel Mac will boot from a disk partitioned with the Apple Partition Map. What you can't do without GUID is use the Apple Installer (which is used for e.g. System Upgrades).
    Andreas

  • I want to partition an external device for OSX and Windows.  Opened Disk utility but Partition is not an option

    I want to partition an external drive for OSX and PC.  Went to Disk Utility but Partition is not an available option.

    Why not? does the partition tab not exist?

  • Can I partition my hard drive to hold Windows 8 (Beta), instead of Windows 7, and can I do this with an external CD drive?

    I have a late 2008 Macbook Pro with Mac OS X 10.8 Mountain Lion installed, but my CD drive inside my computer is damaged*, and it's far cheaper to buy an external CD drive than to repair it entirely. Before I do either, I would like some grasp of whether or not it's worth my time and money, as I've yet to order the external drive or make a genius bar appointment.
    Also, the reason I'm choosing Windows 8 (Beta) is because it's free.
    *I dropped my computer once two years ago. I haven't even used my CD drive until recently when trying to install Windows 8. I assume the drop was the issue. I've used compressed air to remove dirt/dust as well as resetting the PRAM multiple times and nothing seems to work, but I'm not worried about it.
    Thank you.

    Can I partition my hard drive to hold Windows 8 (Beta), instead of Windows 7, and can I do this with an external CD drive?
    No and No.
    1: Apple only supports Windows 7 at this time in BootCamp (direct install into a bootable partition) because Win 8 is in Beta and no Mac hardware drivers are available yet from Apple for Windows 8.
    2: You can't install Windows from a external cd drive into BootCamp, it has to be a internal one far as I know, perhaps a USB will work I don't know.
    Yes:
    1: You can download and install Windows 8 Beta into a the free virtual machine software called VirtualBox, which Windows 8 will run in a window in OS X. This is better as it's still in Beta and Windows Beta releases will expire. Plus Windows 8 is a pain in the behind and you will want to be able to have VirtualBox or OS X be able to regain control over the computer.
    http://osxdaily.com/2012/03/03/try-windows-8-consumer-preview-virtualbox/
    Windows in BootCamp or Virtual Machine?

  • How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

    Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

    OK. Start with:
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

  • Can't move a project to external drive. Followed Apple's help instructions. Is it because I partitioned the external drive?

    When I drag the project to the external drive in the event library, it does not lock on. Thus, options for Move Project or Move Project and Events don't show up.The WD external drive has been formatted correctly. It has 2 partitions, one for Time Machine, one for saving files and folders.

    zarathu wrote:
    You don't say if you are using iMovie 11.  The only way to move a project is to have '11. 
    And then you have to save it as an Archive.  You can move the archive.  You can also save it as a disk image but that will be a completed document. 
    If there is no"Archive Project"  in your file menu, you are out of luck.
    The issue here is that the iMovie 11 Help files are incorrect (see below).
    It is actually very simple to move a project and all its associated components to an external drive.
    You have to do it however in the Project Library and not mix it with the Event Library as the help files suggest.
    Type in External Drive into iMovie Help and read through the results.
    Best, Z.

  • I have a 15" MacBook Pro with Mountain Lion installed.  I have partitioned the hard drive into two partitions.  Is it possible to install Snow Leopard on the second partition?  If so how do I do it?

    I have a 15" MacBook Pro with Mountain Lion installed.  I have partitioned the hard drive into two partitions.  Is it possible to install Snow Leopard on the second partition?  If so how do I do it?

    If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
    How to erase and install Snow Leopard 10.6
    Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
    If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
    https://discussions.apple.com/thread/3264421?start=0&tstart=0
    If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8

  • Windows and OS-X partitions on external drive

    Has anyone had any experience/problems with partitioning an external drive for OS-X and Windows?
    How about 3 partitons: HFS+, FAT32, NTFS. Or is that pushing my luck too far?
    I just received a new LaCie, primarily for backing up Vista Ult 64-bit, but if I can also use it for XP and OS-X that would be great.
    Any information will be most appreciated.
    Message was edited by: nerowolfe

    Moonlight Mac wrote:
    I've used an external USB2 drive to boot XP, but it is a very dicy process, and not really worth it in the end. You can slipstream USB boot support into the XP installer, but when you are done, you won't have virtual memory support (no pagefile). It also requires that the internal drive be removed during installation (if XP sees an internal drive, it will insist on attempting to use it for a pagefile.)
    I've done the same with a 4GB flash memory card... but booting was hit or miss.
    I've partitioned my internal into 2 HFS and 1 NTFS partition, and that works very well when combined with MacDrive on the PC side. I'd stick with using the external as just a backup device or for OSX (works best with firewire.)
    I am not looking to boot XP although that would be nice, but simply to create a backup on the drive. I use Norton Ghost, which does allow a boot, or sorts, into the backup in order to restore a system.
    But more, I was interested in an NTSF partition for Vista on this MBP. I have not used Vista's built-in backup program so I don't know how it works, but my thoughts were to partition the 500GB into multiple partitions and use them for XP, Leopard and Vista and a CCC clone of my two Leopard OSs.
    Say, 3 HFS partitions for clones and storage, 1 FAT32 for XP and 1 NTFS for Vista, making 5 in all.
    The 2 HFS partitions are probably easy. It was the other two, FAT32 and NTFS that I was concerned with.
    I guess I will plug it in and use DU and see what happens. I have never used DU for NTFS or FAT32 on an external drive.
    As long as the drive is empty, I have nothing to lose and lots of experience to gain, right?

  • Help with partitioning an external drive

    I've never done this, so am not sure how it works. I have an external drive (250 gb) that I use with SuperDuper to back up my Mac. Now I have decided I also want to keep a separate iTunes library on this drive. Apparently, so that SuperDuper doesn't erase the new iTunes library, the drive will need to be partitioned.
    So. . . I will use Disk Utility to partition that drive into two and call each section something different? Will each section then look like a different drive (for instance, in SuperDuper)?
    Are there any tricks or tips I should know before running Disk Utility's partition application?
    I have searched the forum for info on this, but most of the people seemed to have at least basic knowledge of how it works, so didn't get much help there. I want to ask before I go and erase the drive.
    Thanks in advance!
    Chris
    Powerbook G4; Intel iMac 20inch Core Duo Mac OS X (10.4.7)
    Powerbook G4; Intel iMac 20inch Core Duo   Mac OS X (10.4.7)  

    Disk Utility offers following partition schemes:
    GUID -> Intel Mac
    Apple Partition Map (APM) -> PPC Mac
    Master Boot Record (MBR) -> PC
    My apology for referring APM as PPC in my previous post. Native partition scheme (GUID for Intel Mac and APM for PPC Mac) must be used in order to install Mac OS X in the partition as startup disk, it allows booting as well as firmware update. If partition must be shared between Intel Mac and PPC Mac, then only APM scheme can be used since both Mac platforms are able to access APM partition but only PPC Mac can boot from this type of partition.
    Since I have only one Intel Mac and booting from external storage is necessary for maintenance (full defragmentation) and repair (in case when internal drive has crashed), I use only GUID scheme for iMac's internal drive and Firewire external drive. Super Duper is used to mirror exactly internal drive to external drive regularly. The only time I have to perform file transfer between PPC Mac and Intel Mac with external drive was during hardware upgrade as follows:
    iBook G4 -> iMac G5 -> iMac CoreDuo -> iMac Core2Duo
    Thus the decision for partition scheme of external drive depends on whether you have to boot Mac OS X from external drive (no in your case but highly recommeded for emergency plan) and whether sharing of external drive between your PowerBook G4 and iMac CoreDuo is desirable. I assume you will select APM scheme for your purpose since booting Mac OS X from external drive is not required.
    Use of very old Master Boot Record (MBR) scheme will turn the external drive into PC drive completely. Unless this drive must be accessed in Windows environment as conventional PC drive for some PC disk utilities (these old utilities can't work with new GUID scheme), use of this non-native scheme for Mac OS X is not advisable.
    Hopefully above information will help you in partitioning external drive. Since you do not have to preserve content of this external drive, why not go ahead and experiment with new partitions to see whether they serve your purpose ? Disk partitioning without writing zero or any random patterns on whole disk takes only few seconds. But it is a good idea to write zero (shortest time required) across whole disk surface to ensure that bad disk blocks are masked off to prevent future access and possible crash.
    iMac Intel Core 2 Duo 2.16GHz / 1GB RAM / 250GB HD / 20" LCD   Mac OS X (10.4.9)   Firewire RAID, iPod nano

  • Can't Boot From External Drive

    Situation:
    Prior to upgrading to Lion I used SuperDuper to create a copy of the existing internal hard drive on an new external drive (iOmega eGo 500GB).
    Tested booting from the external disk and it appeared to work correctly.
    Upgraded to Lion.
    Several days later attempted to boot from the external disk (by setting the start up disk in  the system preferenes ) but it fails.
    The system always boots into Lion.
    What I've tried:
    Setting the start up disk through system preferences
    Holding down the option key to select a disk on startup - interestingly enough I only see the internal hard disk and a recover HD. No sign of my external disk.
    Using a clean partition on the external hard drive I installed SL from the retail DVD. This produces the same effect of system booting to Lion on the internal drive, which suggests that the problem is not related to the copy I made using SuperDuper, but rather has to do with the external drive or something in Lion that prevents using an external drive (but I've never heard of such a thing).
    Talked to technical support at Apple since I had newly purchased Lion. They couldn't offer a solution but did give a lot of thought and suggestions - but they don't support booting from an external disk.
    Talked to iOmega technical support. Not helpful but did figure out at the end of an online chat that they don't support their disks being used for external booting.
    Emailed SuperDuper. Very helpful. They offered some suggestions but in the end these didn't work.
    Characteristics
    Lion 10.7.4
    iMac 2007
    External Drive Interface FW800
    I'd appreciate any suggestions as to the cause of the problem and possible fixes.
    Thanks

    @shootist007
    Still no success but more information:
    I found the USB cable for the drive, connected it to a powered USB hub (note that there are two cables going into the hub that must merge and go into a single connector for the USB interface on the drive). with both cables plugged in I still can't get the external drive to boot.
    I need to do one more experiment on this. The hub is fully loaded so I'll try removing as much load as possible on the USB to see if I can get it to work.
    Regarding your question, there is no way to get power to the drive. (Now I think about it, the design is for a portable drive that you can carry around with you so iOmega aimed the design at not needing a power supply to make it very portable). Hmmm, didn't think about that when I purchased it.
    If reducing the load on the hub doesn't make it work then I'l have to get a replacement drive with its own power supply.
    Thanks for your help. Even though no success yet I suspect you've identified the problem.

  • Partition an External Drive for Time Machine?

    I am new to the Mac world. I have a new iMac with a 1TB hard drive. I have a 2TB external USB hard drive I've plugged in and started using with Time Machine to backup up my Mac. But I'm thinking I'm wasting a lot of hard drive space which I could use for something else. Can I partition the external hard drive say into two 1TB partitions and use one for Time Machine and one for something else? If so, can I do it now that Time Machine thinks it has all 2TB? Or do I have to start from scratch? Thanks!

    +Can I partition the external hard drive say into two 1TB partitions and use one for Time Machine and one for something else?+
    You can, but it's not advisable. How are you going to back up the data on the other partition? If your internal drive is 1 TB, then 2 TB is about the right size for a TM backup volume.
    If you place any value on your data, hard drives are cheap. Just get another one.

  • Partitioning new external drive

    I am still a bit nervous about setting up the 150 gigabyte external Firewrie drive I recently purchased.
    There are four users of the eMac to which the external drive is connected and I want all users to be able to back up their files to the drive and have access to them. I also want to partition the drive in order to install OSX so I can boot from the external in an emergency.
    My question is; do I want to partition the drive into 5 parts? One partition each for each user and one for the OSX?
    Thanks in advance for any advice.

    Thomas Hanrahan wrote:
    I am still a bit nervous about setting up the 150 gigabyte external Firewrie drive I recently purchased.
    There are four users of the eMac to which the external drive is connected and I want all users to be able to back up their files to the drive and have access to them. I also want to partition the drive in order to install OSX so I can boot from the external in an emergency.
    No need to partition it so that you can boot. Just install the OS.
    My question is; do I want to partition the drive into 5 parts? One partition each for each user and one for the OSX?
    If you boot from the external drive, then you can create separate accounts for each user, and each user will be able to see just his stuff. No need to partition.
    If you boot from the internal drive or a different external drive, the situation becomes more complex.
    Thanks in advance for any advice.

  • My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

    My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

    If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
    Or you could move them to the internal drive and double-click on them once the move is completed.
    To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

Maybe you are looking for

  • Macbook Pro won't start up - Mountain Lion won't install

    Hello, I have a Macbook Pro from august 2012, today it just crashed. I tried to fix it with disk utility, but it told me that I need to reinstall Mountain Lion, because disk can't be fixed. I then tried to reinstall Mountain Lion but at first it didn

  • Characters are cut off when they don't fit in the pdf report output.

    Hi All, I understand that Forms 6i and Oracle 9 iAS have been de-supported for years. Meanwhile we do still run a small application in the 9 iAS environment. We have forms and reports running on Windows 2000 server, I am able to successfully clone th

  • Only downloads part 1 of 2

    I subscribe to several podcasts that are often "longish", i.e. two hours and they come in two parts but both posted as available the same date. I only get one of them donloaded to itunes, e.g. Hour 1 of 2... What to do to make this work without havin

  • Restore fails. iPod reboots soon after restore starts

    Hi Everyone, I'm having trouble restoring my iPod. Basically, I right click in iTunes on my iPod and select "Restore from Backup". After that, I'm presented with a number of backups that are present in my c:\Documents and Settings\<username>\Applicat

  • After Effects sometimes won't export unless Premiere Pro quits

    Has anyone run into this one? I will have both AE and Pr open and begin exporting comps out of AE (not dynamic linked comps) and the render barfs. I then exit out of Premiere, duplicate the output render that barfed in the render queue and it works f