Can i partition an external drive that im using for time machine? its not an actual apple TM....

I'd like to partition my drive to make a separate place just for itunes music , is this possible? if so, how ?
thanks!

tamckellar wrote:
im just trying to make a separate area on the ex drive that i use for tm, to store just my itunes library .
Not a good idea...If that drive fails (and they All do at some point in time) you will lose both your TM and iTunes Backups.
Invest in another EHD for iTunes.
Moving iTunes >  http://support.apple.com/kb/HT1751
Also...
Have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

Similar Messages

  • I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine

    I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine
    and if it yes i want to know if i have 1TB hard disk to use the 500gb for time machine and the other 500gb for normal use

    thank you very much because i am considering to buy the porsche design hard disk 1TB and i want to have it for normal use and for time machine is a pitty to give 1TB for back up only again thanks and i know seperate the back and the working jobs are better but the i have to have 2 hardisks and i want only 1

  • Lion won't install can't select hard drive that is used for time machine backups

    I installed Lion, agreed to the eula but both drives are greyed out. My Macintosh HD - ( this dirve is used for time machine backups) and my external drive (this drive does not use the GUID Partition Table scheme...). Though I don't use time machine, I tried turning it on and selecting the external drive with no luck. I'm stuck - any ideas?

    "Backups.backupdb" if the file in Time Machine.  As the discussion says, you have to find that file and trash it.  Try spotlight to locate it.  If that does not work, down load OmniDiskSweeper from the Internet (free) and go through an organized search to find "Backups.backupdb".  If that takes too long or is too tedious, then if you have everything backed up, erase the HDD and start from square one.
    Ciao.

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • Can you unplug the external hard drive you are using for time machine

    can you unplug the external hard drive you are using for time machine and then plug it back in and it work normals because i have a mac book and don't want to always be carrieing the external hard drive every where i go so can you ?

    Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.

  • HT201250 Is there a size limit for an external drive to be used with time machine?

    I have an iMac with a 2TB drive. I have a 2TB WD drive used for Time Machine that is full. I would like to go to the bigest WD (type) external drive that will work with Time Machine. Is there a TB limit for TM in OS X Lion?

    Welcome .  I have also used a 2TB WD My Book ext HDD for Time Machine backups for the past year and have had no problems.  They seem to get a  very bad wrap.  Perhaps we are a few of the lucky ones.  The two brands recommended by macjack are very, very good brands.

  • Can I use the harddisk that I used for Time Machine on my previous computer on my new computer without deleting the old back-ups?

    Can I use the harddisk that I used for Time Machine on my previous computer on my new computer without deleting the old back-ups?

    Yes.  See:
    http://pondini.org/TM/4.html
    My only concern is that you may not have enough free space on the drive.

  • HT5988 I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I agree entirely, been messing with this since the upgrade to Mavericks but I didn't find it quite as easy as uninstalling the WD smartware as it still operates when you plug the drive back in - I think it gets loaded onto the drive and runs from within (?). The advice from WD was that time machine was faulty and I should contact Apple...thanks guys!
    Anyway, for the OP's benefit, this is what I found:
    1. My problem was that time machine couldn't see any further back than before the Mavericks install, but if I opened up and interrogated the WD drive, the old backups were still there.
    2. When TM started doing new backups, it overwrote the ones that it could see, not the oldest ones on the drive. This indicated to
    me that the WD software had somehow partitioned off the old backups and excluded that part of the drive from being overwritten. Of course, as the drive was practically full, it meant that any new backups wouldn't fit in the available space.....
    3. The only way I could find to resolve this was to use the disc utility to erase and repartition the external drive. This will obviously remove all of the old files and backups, but I was more concerned about keeping a current profile as backup rather than a load of stuff from months ago.
    4. Anyway, what happens after the eraseure has completed is that you get the WD icon on the desktop, and you're invited to install the software - this means the software has now been deleted. Juts don't reinstall it, just let TM do it's backup and all is well.
    Usual disclaimers and warnings about keeping another copy of your system etc. obviously apply, and I know this is a radical move to delete all your old data but it worked for me. I guess I didn't appreciate that you could use the external drive without the software that came with it and just followed the screen guide.
    I'm also aware that if you don't want to use TM to do a complete restore and only want to find one old version of a document, this is difficult. However, you can then install the WD software and find the file but you'll then have to do this all again.....

  • When ever the power goes out or I restart my iMac the external hard drive that is used by Time Machine for backups is dismounted ?

    When ever the power goes out or I restart my iMac the external hard drive that is used for backups by Time Machine is dismounted and all backups are gone. I can reselect it and it will start working again, but I am worried if the iMac hard drive should fail will I be left without a backup ?

    fzgy wrote:
    "Mac OS X can't repair the disk.  You can still open or copy files on the disk, but you can't save changes to files on the disk.  Back up the disk and reformat it as soon as you can."
    It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
    Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
    That will erase it.  See Time Machine - Frequently Asked Question #5.
    It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
    I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast).  Use it for secondary backups, per FAQ #27.   If it has failed, get a second new one for secondary backups. 

  • How to transfer iTunes Music stored in an External Drive that I use for my Windows PC and use it in iTunes on Mac?

    Hi just bought my first Mac (a 2013 13' MacBook Air). Before I owned this computer I used (and still use) a Windows Desktop. My Windows Desktop (which runs Windows 8.1) has a 1TB Hard Drive that was getting pretty full so I moved all of my iTunes Music, Movies, and TV Shows onto a 2TB external hard drive. This meant that iTunes would open/work even if the external hdd was not plugged in, but only when the external HDD is plugged in do I see all of my downloaded/ripped music/movies/tv shows. Now that I own a Mac I would like to do the same thing - have all of my media on an external drive that is plugged in via USB. So my question is (A) how do I make my itunes media stored on this external HDD accesible to the iTunes on my MacBook, (B) do I need to partition the external HDD to do this, and (C) because I fully intend to keep using the drive with my Windows PC (it stores a complete backup as well as a ton of Steam videogames), will I need to totally erase the drive in order to create such a partition?

    Before we can help you, you must tell us how you are backing up your data.
    Allan

  • HT4718 I have an external hard drive that I used as Time Machine Backup. I have not used it for a while and now, when I plug it in computer says:  This disc is not readable. I want to recover the backups and not erase and reformat the disc.  Thank you in

    I have an external hard drive that I have used as Time Machine backup, but not for a while. Now when I plug it in, computer says this disc is not readable.
    I want to keep the backups on it and not erase and start over.
    Thank you in advance.
    Gregor

    It sounds like something went wrong with the drive.  Did you drop it?  How long has it been sitting around unused?

  • My external hard drive has been used for Time Machine, now it doesn't work on my TV?

    I bought a new external HD 3TB, I used it as a back for Time machine and also wanted to use it for watching my movies etc on my TV. The TV won't recognise any video's on the HD. Is there some reason this would happen due to using it for Time Machine?

    If you are talking about a drive that you connect directly to your TV, typically they will recognize only drives formatted in some specific way & only certain kinds of movie files. You can check your TV users manual or its manufacturer's web site for information about this, but in general they will not recognize drives using the format Time Machine requires.

  • My mac mini quit recognizing the external hard drive i am using for time machine.

    I have an IOMEGA external hard drive hooked up to my mini for Time Machine.  It was working for about 4 months then quit.  The PC will not recognize the hard drive and I have switched usb cables and tried different ports to no avail.  Any help would be gladly appreciated!!

    Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.

  • Update 10.5.6: external HD used for Time Machine does not MOUNT anymore

    I've used this LaCie external Little Big Disk since November 2007 with Time Machine, without problems. Recently, after updating to OS 10.5.6, the disk does not mount anymore when connected by FireWire800. Same result when using FW400 and USB.
    The disk shows up in the System Profiler under FireWire. When I run analysis with a program 'Data Rescue II', it also sees the disk.
    Main issue: disk does not mount anymore. So no more TM backups possible.
    Although the disk also shows up in Disk Utilities, I can't partition or reformat it. I ran the LaCie Update Tool 2.0.1 and it says firmware is up-to-date.
    I also reinstalled the Combo Update 10.5.6 without result. Also did all the forum recommendations such as resetting PRAM and using Terminal to 'mount /dev/xxx'. Does not help.
    I feel this is an Apple issue.

    Yes, did it three times. Also already hooked up in daisy chain, and yes, also connected to another Mac (also 10.5.6). Same result. I think it's an OS 10.5.6 issue, because it happened after the update and I had never problems in the last year using this disk with TM (it's not full either). I hope it's not, however, but I am afraid it is. Also I've posted the issue at LaCie support and see what they answer.
    Thank you for your reply.

  • How can i format an external drive to be used for both windows and mac

    i recently bought a macbook pro and used bootcamo so as to be able to run win7 and mac. I now wish to have an external usb drive so as to backup and tranfer files between the two os's. How can I do this?         

    Firstly,
    There is a forum for MacBook Pro - not this. And for Boot Camp.
    You can:
    add Paragon HFS driver to Windows which works
    add Paragon NTFS for Mac OS X
    USB is of course slow and while people use it for backups and TimeMachine, that is one place where FW800, eSATA or USB3 would be better served.

Maybe you are looking for