Can I perform future holds for a lot

Hi
Can I perform future hold for a lot in OSFM Module.
I want to hold a lot for further process, once it crosses a specific operation. Or I want to hold it after so and so date.
Please post your advises.
We are using 11.5.10+ version
regards
Sreee

This is a good requirement however unfotunately this is not supported currently in OSFM..
Thanks - rakesh

Similar Messages

How can I perform data logging for a specific time??

hello everyone,
I am quite new in labview and I have a basic question regarding data logging. Currently I am using a cRIO9074 and doing some data logging for my test. The data logging it self works ok so far.
But my problem is I would like to write my datas in a text file either for a specific time interval (ex)10 seconds) or for a specific amounts of data (ex)500 Samples). Can anyone give me some help regarding my problem?? Attached you can find my RT.vi
I would appreciate for anyhelp!
Regards
Yun
Attachments:
BP250 Encoder Position & Velocity (Host).vi ‏92 KB

Run your loggging program for that time. When your program terminates then it will write all the logged data so far in text file.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Can not perform any postings for a material

I am trying to post stock into the warehouse through MB1C with 561.I am doing it in Dev sand box.The company code is not accepting my postings in the current period.Its is accepting for past periods.How do I update this in for the current period?

As per my understanding the current period in your system is 07 2007.
Incase of of Company Code, if it is the same, then enter Company Code ony once.
Please do not enter the period 07 2008 as it is future period & once you open that period it is difficult to revert back.
If possible ask an MM consultant to do the same.
Incase you require to do it, in that case enter company Code & period 08 2007. Similarly do the same till period 10 2007, as I suppose the current period should be 10 2007.
However, safest is to to enter Company Code & current date in T.Code: MMPV
Regards,
Rajesh Banka
Reward points if helpful.
Edited by: Rajesh Banka on Jan 17, 2008 8:15 PM

Can I perform masking & layers for HDR image in Aperture 2 _RAW images

Hello
I own Aperture 2.
Can I do post processing such as masking & layers like one do to to create HDR image.
If so...
I generally take in RAW format. In Photoshop or Photomatix the HDR post processing is done in JPG. [I do not own Photoshop or Photomatix]. Do I have to save it as JPG or take my photos in JPG to get the above done in Aperture 2?
Will Aperture 2 handle JPG to create HDR image?
Regards

yo,
i only very recently paid for photomatix (pmx) and started to use it....... i like it
eish, paid $129 from their website.......... see it (essentials?) is 29$ from app store
"real" hdr multiple exposures are possible with pmx as well as single image "tone mapped" files
aperture 2 or 3 do not offer hdr post processing, i think, photoshop *** compared to pmx (more tweaking possible)
if you use pmx one can use raw or jpg files, i do not think it makes a difference to the outcome
i use it as a stand alone app, BUT i think it could be used as a plug in... why bother?
one can save pmx files as tiff or jpg
you decide
let me know
ps- do not destroy the original files!, it's easy enough to re-convert them to hdr/anything again later
pps- you can download pmx as a try out for free, but they post a watermark on the final result, it's worth the experiment, at least you know what you are dealing with.... (available from their website), but it looks like the app store option is cool!... check out both

Un-Production - Can you perform prod confs for negative quantities?

Ok so I don't have a system I can use at the moment to set up a scenario and test so I thought I would write a question on here.
Does anyone know if it is possible to do a "negative" production confirmation, the end result being a 102 of the finished good and a 262 of the component materials?
I have an example where a production order was used to produce an item some time ago. I want to debundle the components so I can sell them separately and I was thinking about using a production order for the process. I know I could do some kind of inventory adjustment but I want to use the prod ord to collect costs (including perhaps some activity costs like labor, etc.)
Has anyone done this before?
Mark

Hi,
Create an order via CO07, specify the settlement receiver as a G/L or a cost center (check with your FI people for this), then in the operations specify an operation as dismantle, give a work center where you intend to do it (ensure it has activity type & rates defined). In component view add the assembly with +ve qty & the components which you intend to dismantle from this assembly as -ve qty.
Now post GI for the main assembly & for the components. System will post a 261 mvt for the main assy, indicating this order has consumed the assy & for the components system will post a 531 mvt, which would result in inventory for these parts. Post confirmation for the dismantle operation. Now the costs will be settled onto the GL or cost center as specified in the settlement rule.
Do a test in sandbox along with FI-Co colleagues & if it meets your need, proceed to do the same in PRD.
Good luck.
Regards,
Vivek

Can we set future dates for forward emails for part time staff?

We have a part time staff member who is off on wednesday each week.
Can we pre-set a calendar function to always have their email forwarded to a support email address on all wednesday's so emails from customers do not get missed?

I suppose a brute-force approach would work with a filter of the kind pictured below, as long as all Wednesdays were entered, but if the account could be set up as IMAP, then the mail could be viewed on any device at all times, including the days when action is required by another staff member.
An IMAP setup would also display all replies on any device, made from any device, so that everyone would know when replies had been made to customers.

Can someone perform this speaker test for me please

Hi can someone perform this test for please, play some ipod music through your phone and and cover 1 speaker at a time with you finger, does 1 block out the music as if one speaker is much louder than the other ? just I have tried this on my new iphone 4 as thought it might be a problem but my 3GS is doing it to ??, is it fault or meant to be like that

There's only one speaker.
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

Future support for APPV Management Servers

I have heard rumors that APPV is moving away from the separate Management servers and future releases will only support SCCM integration. Is this a true roadmap ?

I don't have any insider information BUT I have not heard this from anybody. I'd lean on the side of not believing this. It's still an ok solution for small Enterprise.
Considering the announcement yesterday, what the future holds for App-V should be very interesting.
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

My Iphone 4 will switch on but will not respond as screen frozen (can't slide to switch on or answer calls) I have tried holding for 15 secs to reboot but same problem???

My iphone 4 will switch on and charge, but a lot of the time the screen is frozen (can't slide to switch on or answer calls) I have tried holding for 15secs to reboot but it doesn't clear the problem????

When you say "holding" is it both the sleep switch and the home button until the Apple Logo comes up? If it isn't then I would recomend doing that. If not, turn the phone off and then (while holding the home button) plug it in to iTunes, this will send the phone into recovery mode and will need to be restored from there. Note* this process does have the possibility of losing data if it is not backed up on the computer!!!

I bought new Macbook Pro 13" around two months before .My Apple ID is working on all other things except app store . It is buffering for a lot of time and lastly coming on screen " can not connect to app store " Please help me

I bought new Macbook Pro 13" around two months before .My Apple ID is working on all other things except app store . It is buffering for a lot of time and lastly coming on screen " can not connect to app store " Please help me

Have you tried repairing disk permissions : iTunes download error -45054

Printing to a Windows shared printer, keep getting "Hold for Authentication" when I'm on the Windows shared network and can browse the computers.

I have had two MacBook Pros now, and this has been an issue in Mountain Lion and Mavericks. I've got a shared printer on the local Windows network (it's a USB printer shared via the network and the computer), and the other Windows computers in the house can print to it no problem. The Mac sees it no problem, yet whenever I try to print to it, I just get "Hold for Authentication."
Like I said, persists over Mountain Lion and Mavericks. No other computer in the house has any issues printing to it. I've installed the drivers for the printer as well (Brother HL-2240).
I've tried to follow the instructions here: https://discussions.apple.com/message/23268762#23268762 but the printer isn't listed in Keychain Access.
Any thoughts?
Thanks in advance!
Patrick Campanale

Well, that isn't too useful. Try this instead: Adding a printer shared by a Windows computer via SMB/CIFS.
You may find more by selecting Mac Help from the Finder's Help menu and searching for articles by keyword.

Can Web Performance Test work on AJAX or Javascript Project which will show only one URL for all the pages?

Hi there,
I'm working on testing a AJAX and JavaScript Project which has several pages but all in the same URL. I need to test some attribute on the page or parameter past by AJAX or Javascript. Can Web Performance Test work to get what I want?
Thanks,

Hello,
Thank you for your post.
Web performance test is used to test if a server responses correctly and the response is consistent with what we expected. And we test the response speed, the stability and scalability.
The Web Performance Test Recorder records both AJAX requests and requests that were submitted from JavaScript, but
web test does not execute JavaScript. I am afraid that you can’t use web test to test parameter past by AJAX or JavaScript.
Please see:
Web Performance Test Engine Overview
About JavaScript and ActiveX Controls in Web Performance Tests
From the first link, “Client-side scripting that sets parameter values or results in additional HTTP requests, such as AJAX, does affect the load on the server and might require you to manually modify the Web Performance Test to simulate the scripting.”
If you want to execute the function typically performed by script in web test, you need to accomplish it in coded web performance test or a web performance test plugin. Please see:
How to: Create a Coded Web Performance Test
How to: Create a Web Performance Test Plug-In
I am not sure what the ‘some attribute on the page’ is. If you mean that you want to test those controls on the page, you can do coded UI test, which can test that the user interface for an application functions correctly. The coded UI test performs actions
on the user interface controls for an application and verifies that the correct controls are displayed with the correct values. You can refer to this article for detailed information about code UI test:
Verifying Code by Using Coded User Interface Tests
Best regards,
Amanda Zhu [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

What's the maximum size a varchar2 variable can hold for and NDS Stmnt?

What's the maximum size a varchar2 variable can hold for and NDS Statement? I read that NDS is good for doing EXECUTE IMMEDIATE on statements that aren't too big. The 10g PL/SQL manual recommends using DBMS_SQL for statements that are too large, but it never gave a limit for what too large was. Does anyone know offhand?

The limit is the same as the length of varchar2 variable within PL/SQL - that is varchar2(32767).It's not documented, but intermediate concatenation result can hold up to (64k-1) :
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
declare
part1 varchar2(32767) := rpad('begin null;', 32767);
part2 varchar2(32767) := lpad('end;', 32767);
begin
dbms_output.put_line(length(part1 || ' ' || /*' ' ||*/ part2));
execute immediate part1 || ' ' || part2;
end;
65535
PL/SQL procedure successfully completed.

How can I perform the conversion of pdf files in Cyrillic script to Word files in Cyrillic script. The pdf file is too small for me to read right now. Julyan Watts

How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.

This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts

"can the iphone 5 hold 1170 songs and 85 apps or should i go for the 32gb model?"

"can the iphone 5 hold 1170 songs and 85 apps or should i go for the 32gb model?"

I have more music than that and more apps, and I have a 32GB model with about 15GB free, so I would suggest the 32GB.

Can I perform future holds for a lot

Similar Messages

Maybe you are looking for