Can I perform L & J cuts across nested sequences in a master sequence?

Is this possible?
Or do I have to individually alter the start and ends of the separate nested sequences (bring in the clips from the adjoining sequences, into their neighbours) to peform the L & J cuts?
thanks
A

Thanks Stephen, but I must be doing something wrong, I cant get the L & J cuts to work, if I have longer video on sequence 1 and the audio starting earlier than video in sequence 2, and then put those 2 sequences together in the new master sequence, then of course, I just get gaps as it plays, how do I get the L and J cust to cross the sequences?
I'm sure its simple, but my brain just cant figure it!
Thanks
A

Similar Messages

Working with Nested Sequences

I'm working with a 1 hour, 20 minute multi-cam (2 cameras) Sequence of a concert, with many edits. One of the music pieces was complicated, so I separated it out into a separate Sequence, and did the editing. Later, my occasional fcp tutor created a new nested Sequence, into which he transferred the separated piece. The nested Sequence is exactly the same length as the original Sequence.
Since the two cameras required different kinds of Color Correction, we did this in the nested Sequence. Then we exported the nested Sequence as a self-contained QT file. O.K. so far.
But then later, after my tutor has gone, I realize that I don't understand nested Sequences. When I double click on the nested Sequence in the timeline, I'm taken back to the whole concert Sequence in the timeline, out of which the nested Sequence was created. So, Question #1: I can't adjust the audio in a nested Sequence? Question #2: Now, I realize I need chapter markers and I create them in the original whole Sequence, but too bad, they don't appear in the nested Sequence (which has the color correction that I want). How can I transfer my newly created chapter markers in the nested Sequence so that I can now re-export it with the chapter markers?
Thanks, Robert

1. Duplicate the 'whole' sequence (The one with the chapter markers)
Give the duplicate an obvious name. Like "FinaL WITH CHAPTER MARKERS".
2. Delete all clips in this duplicate sequence. (Command-A, then Backspace)
The chapter markers will remain. Don't alter the original sequence in any way!
3. Go to the nested sequence. Copy Everything (Command A, then Command C)
4. Go to the (now empty) Duplicate sequence. Paste (Command V)
Rienk

In sqlserver 2005 there short cut ctrl+N, how can i perform same thing in sqlserver 2008 r2

In sqlserver 2005 there was short cut ctrl+N, how can i perform same action in sqlserver 2008 r2

In sqlserver 2005 there short cut ctrl+N, how can i perform same action in sqlserver 2008 r2
ctrl+N still available in SQL Server 2008 R2, please refer below article for list of shortcut keys.
http://technet.microsoft.com/en-us/library/ms174205.aspx
Also refer below article for how to customize shortcut keys.
http://technet.microsoft.com/en-us/library/ms174178(v=sql.105).aspx
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

Each edit is taking 5-10 seconds to process in some of my project file's nested sequences. What can I do?

I edit a weekly news show. For this show, I have created a Project File that I re-use as a template every week. It's a highly nested template, with a sequence for every used material (the anchorman’s footage, the news set, the media playing over the anchorman’s shoulder, the lower thirds, etc). It has three different camera angles in a multicam sequence, each sequence sharing the same nested sequences but just resized to look like a different camera angle. To make this easier to understand, here's an episode (explicit):
SKATELINE - Cory Kennedy, David Gonzalez, Jimmy Carlin In Enjoi Oververt and more.. - YouTube
In the past, the template has worked perfectly. However, everytime Adobe has a major update and I update the project file, for some reason, some of the sequences perform very sluggishly. With Adobe's recent update, the sequences for the anchorman’s footage and the media playing behind him are very slow to make edits in. Every action I do takes 10 seconds to process, even moving an image. However, if I work in the master sequence (With everything put together) everything runs perfectly smooth when I make edits.
In an attempt to fix this problem, I decided to recreate the project file from scratch, with the new update, but even then, my "anchorman footage" and "media behind him" sequences are very slow. What's even more bizarre is if I select a piece of footage in the anchorman sequence, my entire program sometimes crashes. I have tried rendering the sequences to help performance, but that hasn't worked. I have tried installing CUDA Drivers to use the CUDA version of the Mercury Playback Engine on my Macbook Pro Retina, but it also still isn’t working.
So why do you think that my sequences are operating so slowly? What could be causing it? Could it be that each sequence is used several times in the multicam sequence? If so, why has it worked smoothly until now? What can I do?

Yes same issue for me also, working in mutli cam nestings
Very Very Sluggish Performance, semi hangs in PP, if you actually wait long enough, or leave it hung whilst you do a post on here, for a few minutes then it may come back to response.
The issue is defo to do with nesting, I have tried turning off audio wave forms, which helps in the multicam nest edit but as soon as you put that sequence into a third nest then the sluggishness is major.
Basically, this looks to be the same issues that have been reported before with the new update.

"Can not perform this operation because the layout is too complex"

"Can not perform this operation because the layout is too complex"
to create a 3D extrusion
Hello
Is it possible to work around and solve this problem?
Without going through the box: cutting 4 part
please
xavier.

Merci Violon popur tes conseilles, cool !
After clipping of an object on a photo
I want to make a 3D extrusion.
With a picture of this size that does not work :
1979/2765 300PP 31,3Mo
I have this error message appears: “ Can not perform this operation because the layout is too complex ”
For successful operation
I must necessarily reduce the size of the photo to
597/834 300PP 2,85Mo !!!
How not to lose the pixel ?
I need it additional plugins ?
Version Adobe Photoshop : 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
Système d'exploitation : Mac OS 10.9.1
Architecture système : UC Intel Famille :6, modèle :44, niveau :2 avec MMX, SSE Entier, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Nombre de processeurs physiques : 12
Nombre de processeurs logiques : 24
Vitesse du processeur : 2930 MHz
Mémoire intégrée : 32768 Mo
Mémoire libre : 27285 Mo
Mémoire disponible pour Photoshop : 31299 Mo
Mémoire utilisée par Photoshop : 90 %
Taille de la mosaïque d'images : 1024K
Niveaux de mémoire cache de l'image : 4
2 X 2,93 GHz 6-Core Intel Xeon
NVIDIA Quadro 4000 2048 Mo
4 X 8 (32 Go) DDR3 @ 1066Mhz
2 X OWC Mercury Extreme Pro 6G SSD Media (System acquisition / Projects)
2 x 2 To de DD (5400tr/min)

Can't adjust widescreen filter in nested sequence

I created a new sequence, then dragged a previously cut sequence into the Timeline of the new sequence to create a nested sequence. I then dragged the Widescreen filter onto Video Track 1. Although the filter was applied (it shows up in the Canvas), the parameters are not showing up in the Viewer filter tab. There is no way to adjust the properties of the filter.
I'm sure there is some simple explanation but I can't figure it out.

right click on the nested clip (sequence) in the timeline and choose "Open in Viewer"

Nested sequence: after a cut, audio repeats from previous clip

Summary: In a nested sequence situation, I'm getting short audio repeats from a clip element just prior to a cut.
Context:
Premiere Pro CC, latest version at time of writing (7.0.1 (105), under Windows 7 (64-bit).
Structure: I have a sync-sequence (multicam source sequence) consisting of XDCAM-EX (file structure broadly along the lines of AVCHD) and Z1 (plain m2t files). Derived from / dependent on that is a multicam edit sequence, where I cut between camera angles. Then that sequence is itself nested in a master sequence (showing selected extracts of the performance).
For reference purposes: Multicam edit sequence consists (among other things) of a rock band's "big finish" followed by some applause. I made a cut in the audio part (only) of the nested sequence clip, to enable the audio for the applause to be normalized independently of the band performance. To smooth the join I added a crossfade transition over the cut. Nicer in principle than using volume envelopes.
When I play the original recording or the multicam sync-sequence or the multicam edit-sequence, all looks and sounds fine.
Problem:
When the Master sequence is played back (in preview or an exported/encoded clip) I hear the big finish, then applause starts, then after 2 seconds the "big finish" is heard once again, but at lower audio level.
This effect happens wherever I have used the same cut/normalize/crossfade technique in the (nested) multicam edit sequence. I have also encountered it in previous projects in Premiere CS6.
If I delete the crossfade then the problem disappears... Doesn't matter what type of audio crossfade is used.
Is this a known problem? and is there a quick workaround? (other than using envelopes instead or copying/patching the audio up to the master level)

Ah so [Sequence > Render Audio] is not just a "luxury item" to get waveforms to display when nested or to (presumably) to lower CPU load (e.g. when audio effects have been applied). It's something that I will need to always do from now on... It's a shame there's a "feature" but great to know of the workaround.
Thank you very much.

I have AVI files that I need to be MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I have AVI files that I need to convert to MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....When I have the files open in QT Pro do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I strongly recommend you use compressor to do the conversion (if it will open the files - since quicktime will open them, it will more than likely do it.
Compressor allows you to customize presets and save them and apply them to multiple files. Although the interface may seem daunting, it's actually pretty simple.
Even if you can edit the avi in fcp, it's not a good idea. Liable to cause problems down the road.

Can I create a short cut on the home screen to accessibility settings on an ipad

Hi, have a partially sighted sister who uses an iPad, is there an easy way for her to switch between voice over on/off and white on black? without having to go into settings and then scroll down to the appropriate menu
thanks

Patrick Duncan wrote:
Can I create a short cut on the home screen to accessibility settings on an ipad
Patrick ~ Yes, see this post:
Shortcut to Bluetooth Settings
...For quick access to Accessibility settings, set up the shortcut icon with this URL(Homepage) — case sensitive:
prefs:root=General&path=ACCESSIBILITY

How can I perform a bulk assignment to one Task

Hi All,
I would like to allow all resources to assign some of their time to a cProjects Task (XXXX Implementation plan). How can I perform a bulk assignment to this task, instead of performing individual assignments?
Please help.
Thanks,
Srini

Not quite sure I fully understand your question. When you go to the "roles" tab of a task you are allowed to assign multiple resources to a task either from the same role or different roles. The total work or effort for the task can be distributed accross the multiple assignments.

ITunes can only perform one thing at a time

Ever since updating to the latest version of iTunes on my dual core mac mini, iTunes can only perform one task at a time beach balling the entire time. For example if it is downloading a podcast, and I try and watch something off my apple tv via home sharing on this library, it fails to load. Same thing if it is syncing my iPhone.
Importing new media into my library also seems to take much longer than it did before, for instance importing a 700mb movie takes ~20 hours.
What can cause such a degrade in performance?

Back up your drive now. Slow copying may be one sign a drive is about to fail, because it is having to repeat a lot of actions many times.
What does Disk Utility say about the SMART status in get info? Have you verified the hard drive with DU's first aid?

Can no longer drag or cut and paste links or words from one place to another with new Firefox update

After updating Firefox 19.0.2 to my iMac Desktop 10.8.2, Lion, I can no longer drag or cut and paste anything to anywhere, anymore. Please help. Thanks!

Does this also happen if you try to copy/cut and paste text in a text area like "Post a Reply" on this forum?
Try to reinstall Firefox.<br />
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 19.0.2: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (e.g. open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re-)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Can Web Performance Test work on AJAX or Javascript Project which will show only one URL for all the pages?

Hi there,
I'm working on testing a AJAX and JavaScript Project which has several pages but all in the same URL. I need to test some attribute on the page or parameter past by AJAX or Javascript. Can Web Performance Test work to get what I want?
Thanks,

Hello,
Thank you for your post.
Web performance test is used to test if a server responses correctly and the response is consistent with what we expected. And we test the response speed, the stability and scalability.
The Web Performance Test Recorder records both AJAX requests and requests that were submitted from JavaScript, but
web test does not execute JavaScript. I am afraid that you can’t use web test to test parameter past by AJAX or JavaScript.
Please see:
Web Performance Test Engine Overview
About JavaScript and ActiveX Controls in Web Performance Tests
From the first link, “Client-side scripting that sets parameter values or results in additional HTTP requests, such as AJAX, does affect the load on the server and might require you to manually modify the Web Performance Test to simulate the scripting.”
If you want to execute the function typically performed by script in web test, you need to accomplish it in coded web performance test or a web performance test plugin. Please see:
How to: Create a Coded Web Performance Test
How to: Create a Web Performance Test Plug-In
I am not sure what the ‘some attribute on the page’ is. If you mean that you want to test those controls on the page, you can do coded UI test, which can test that the user interface for an application functions correctly. The coded UI test performs actions
on the user interface controls for an application and verifies that the correct controls are displayed with the correct values. You can refer to this article for detailed information about code UI test:
Verifying Code by Using Coded User Interface Tests
Best regards,
Amanda Zhu [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

SP 2013 - Error: This operation can be performed only on a computer that is joined to a server farm

Hello Community!
I am working with SharePoint 2013 and I built a farm inside the firewall. Then a decision was made to move the two WFE's to the DMZ. Since that time, whenever I try to access the site collections, I get the error below.  Other information: All
the web applications are on port 80, but I'm not having any problem with accessing Central Administration which is on port 8080; the network team did screw up the DNS originally, but I'm told it's correct now; the two WFE's servers show in my Manage servers
on the Farm interface 2X, once with the server name, once with the fully Qualified Domain Name, the ones with the FQDN shows a Services Running status of Not Configured.
Has anyone else ever seen this error and if so please provide guidance and instruction for fixing the error.
Thanks!
Tom
Server Error in '/' Application.
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server
to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code.
Exception Details: System.InvalidOperationException: This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server
to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified
using the exception stack trace below.
Stack Trace:
[InvalidOperationException: This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration
database. To connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.]
   Microsoft.SharePoint.Utilities.SPUtility.AlternateServerUrlFromHttpRequestUrl(Uri url) +262
   Microsoft.SharePoint.Administration.SPAlternateUrl.GetContextUri(HttpContext ctx) +385
   Microsoft.SharePoint.SPAppRequestContext.InitCurrent(HttpContext context) +1013
   Microsoft.SharePoint.SPAppRequestContext.get_Current() +175
   Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken,
SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) +400
   Microsoft.SharePoint.SPRequestManager.GetContextRequest(SPRequestAuthenticationMode authenticationMode) +120
   Microsoft.SharePoint.Administration.SPFarm.get_RequestAny() +370
   Microsoft.SharePoint.SPLanguageSettings.GetGlobalInstalledLanguages(Int32 compatibilityLevel) +39
   Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.RefreshInstalledLocales() +103
   Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.Initialize() +130
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.System.Web.IHttpModule.Init(HttpApplication app) +873
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +582
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +322
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +384
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +397
[HttpException (0x80004005): This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To
connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +646
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +771
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18010
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint Gypsy

Hi Tom,
According to your description, my understanding is that you got an error when you moved your SharePoint.
This error occurs when the SharePoint farm administrator cannot connect to your configuration database. Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server. Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server. More information about creating rules in firewall, please refer to the following posts:
http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server
http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Can I perform L & J cuts across nested sequences in a master sequence?

Similar Messages

Maybe you are looking for