Can I permanently repair disk permissions?

I just ran Repair Disk Permissions using Disk Utility. There were 41 permission repairs made. I rebooted the laptop, ran Repair Disk Permissions again, and still it came up with 41 permission repairs.
Is there a way to repair the errant disk permissions permanently?
Thanks.
~Lou

Although it’s immensely popular, repairing permissions is a waste of time unless you have a specific indication of a permission error involving system files, which is rare, or a boot failure. It has traditionally spewed bogus warning messages that mean absolutely nothing. The built-in help for Disk Utility says:
If you see an alert or a message that says your permissions are set incorrectly, you can correct the disk’s permissions by clicking Repair Disk Permissions.
It’s justifiable, though rarely necessary, to repair permissions after running a third-party software installer, as defective installers have been known to damage the permissions of system files.

Similar Messages

  • Upgraded using Snow Leopard 10.6.3 & now running 10.6.8. How to repair Disk Permissions?

    Is it true that running Disk Permission Repair from the original 10.6.3 Snow Leopard disk will not properly repair my hard drive curently running 10.6.8? If it is true, how can I properly repair disk permissions in 10.6.8 if it's counter-productive to boot from the 10.6.3 disk? My MBP is a September 2006 model.
    Thanks, Thor

    If you mean repair permissions, run it from the Mac OS X 10.6.8 system without rebooting.
    If you mean repair disk, restart from the computer's original thumbdrive or Mac OS X install DVD, and if that doesn't work, with the Shift key held down to quietly run the repair utility.
    (71911)

  • The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it. iPhoto can try to repair the permissions.

    Hi, I have the following message when opening iPhoto:
    The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it. iPhoto can try to repair the permissions.
    I select repair, enter my password and I get the following:
    The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it.
    This happened a few weeks ago and I have been fumbelling around trying to fix it. I have no backup servers or shared access. My iPhone and iPad 'used to' pump pictures via iCloud but this has stopped.
    I am adminstrator with open & edit rights.
    I'm using a MacBook Air rinning OX 10.9 (Software  OS X 10.9 (13A603)
    PLEASE HELP!

    Similar problem but not quiet the same:
    Please bear with me as I am very new to this subject.
    1: Using a MacBook Air OSX 10.7.5 and it is WiFi connected to a Time Capsule.
    2: Overnight I have done a complete back-up. Checked the data files and all correct.
    3: I can open the files on the TC except for the iPhoto Library as I want to check visually that they are there. All 2,388.
    4: The iPhone Library on the TC will not allow me to look in.
    5: the iPhoto Library on the MBA allows me access and I can view etc all the 2,388.
    Q1: So why can I not look into the TC's iPhone Library? Or how do I open that library so I can look in?
    Q2: how can I export data back from the TC to the MBA if ever I needed to do that?
    Thanks for helping out a virgin in these matters.

  • Can't repair disk permissions

    I just bought a new Mac Mini (2.0 GHz Core Duo w/2 GB of RAM and 320 GB HD) and migrated all of my files over to it from my Time Machine Backup. Over the past two days my two external hard drives have developed permission problems. Yesterday, I booted my computer and my Time Machine backup drive (Western Digital 1 GB) had a small lock on the desktop icon and my permissions were all messed up. I had two versions of my account with "custom" permissions and "Staff" and "Everyone" also with "custom" permissions. I couldn't fix it, so I formatted the drive and now it is working.
    Today my other external drive (don't remember maker, 500GB) is doing the same thing (lock on icon, et al), but I don't want to erase it. I tried going to Disk Utility and the verify and repair disk permissions buttons are greyed out. Now, I can't get to my iTunes content on that drive.
    Any help would be appreciated.
    Thanks,
    - Paul

    Called Apple Support three times with less than lousy results. My Mac Mini crashed on my first call and it took three Leopard installs before I got back to where I was to begin with.
    However, none of the technicians would touch Terminal to fix this issue, but I had found instructions all over the Web. So, I ran some of the commands in Terminal and magically I could fix my permissions on the external HD. I am now repairing permissions on my Macintosh HD and hopefully that will be the end of it.
    Phew!

  • Disk Utility can't Verify Disk Permissions" and "Repair Disk Permissions"

    I tried to run "Verify Disk Permissions" and "Repair Disk Permissions" on an external partition, but they all grayed out! "Verify Disk" and "Repair Disk" were fine! The "Owners Enabled" is "Yes". Why they were grayed out ?!
    Get Info on this volume showed:
    Ownership & Permissions:
    You can "Read & Write"
    Details:
    Owner: admin
    Access: "Read & Write"
    Ignore ownership on this volume: checked or unchecked STILL grayed out!
    Other partitions on the SAME drive are able to do "Very Disk Permissions" and
    "Repair Disk Permissions" (as they are NOT grayed out !) The ONLY difference
    between the one (CAN'T) and the rest partitions is that one (CAN'T) has
    owner by "admin", and the rest partitions (OK to veryify pewrmissions) are owner
    by "system". ANY CLUE ?
    -DC

    The options to verify or repair permissions are only available on a disk with Mac OS X 10.2 or newer installed, and all Mac OS X versions set the owner of the partition containing them to system when installed.
    (24684)

  • I ran repair disk permissions an all my photos in aperture are gone. How can I get them back?

    I ran repair disk permissions an all my photos in aperture are gone. How can I get them back?

    If you've turned on "Find my iPhone" on the device you can track its location at iCloud. The device must be powered on and have internet access to be located.
    Doubtful you ever backed up your "camera roll" to iCloud but you may have backed it up to your computer via iTunes. You can "restore" that backup to your new iOS device but you can't view the contents of that backup and pick out pieces of it.

  • Why can't I verify or repair disk permissions?

    In recent weeks, when I have tried to verify or repair disk permissions, I get messages that say (whatever file) has been altered and will not be repaired.

    bubbapao wrote:
    I just wondered why I could suddenly no longer verify or repair anything.
    That is not what you said in an earlier post. you said you got some errors that certain files could not be repaired. That is Not the same as I Can't Repair Anything. Certain files not having the permissions repaired is Normal. It happens on every Mac.

  • How can I repair disk permissions

    How can I repair disk permissions on a non boot drive? I have a SSD as my boot disk and a HD as a storage drive. The permissions are not correct on th HD and in disk util the option for fixing the permissions is ghosted out. I really would hate to do this one folder at a time.
    Thanks

    FYI, BB
    Below is a quote from Apple describing what Disk Permissions deals with.
    If you still need assistance, please describe what problem/issue you are trying to solve.
    http://support.apple.com/kb/HT1452
    "Many things you install in Mac OS X are installed from package files (whose filename extension is ".pkg"). Each time something is installed from a package file, a "Bill of Materials" file (whose filename extension is ".bom") is stored in the package's receipt file, which is kept in  /Library/Receipts/ in Mac OS X v10.5 and earlier. These files don't take up much disk space and you shouldn't put them in the Trash. Each of those ".bom" files contains a list of the files installed by that package, and the proper permissions for each file.
    Does Disk Utility check permissions on all files?
    Files that aren't installed as part of an Apple-originated installer package are not listed in a receipt and therefore are not checked. For example, if you install an application using a non-Apple installer application, or by copying it from a disk image, network volume, or other disk instead of installing it via Installer, a receipt file isn't created."
    Is this what you want to "fix"?

  • Can't open downloaded game. says need to be administrator. I am. tried 'repair disk permissions/no help...

    Unable to open downloaded game. Says need to be administrator/I am. Repair disk permissions w/disk utility no help...what do I do?

    This is what popped up after i typed all that in :
    Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version number in .class file
              at java.lang.ClassLoader.defineClass1(Native Method)
              at java.lang.ClassLoader.defineClass(ClassLoader.java:676)
              at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
              at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
              at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
              at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
              at java.security.AccessController.doPrivileged(Native Method)
              at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
              at java.lang.ClassLoader.loadClass(ClassLoader.java:317)
              at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:280)
              at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
              at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:375)

  • Can't repair disk permissions or run Mac Software update application

    I tried repairing the disk permissions and received the following error message:
    Error: The underlying task reported failure on exit
    Got the same error message when verifying the disk permissions. The verify disk option also failed.
    Whenever I run this application to check for updates, it just bounces in the dock and disappears. Then I get this error box that says "The application Software Update quit unexpectedly". It then gives me 3 options to "ignore, report, and relaunch".
    Any ideas would be appreciated.

    Thanks for the fast reply. I was able to run the disk utility using the disk. But I got the same errors when I booted back up and tried to run the "repair disk permissions". Plus the "Software Update" program still crashed.

  • Can't repair disk permissions, System Updates wont install

    Hi there,
    I wondered, why any system update wont install on my MacBook Pro with Leopard 10.5.5. So I tried to repair disk permissions which causes an error that calls something like "there is an error in quitting the process" (sorry ... have only the german version, so this is nearly what it says).
    Repairing the permissions from a Leopard DVD ends up the same way.
    Repairing the harddisk works fine.
    Updating the 10.5.5 Combo Update quits with an error that says "The Installation package couldn't install some of the files in "/". Contact the Manufacturer."
    Any ideas what this could be ? Thought it startet a couple of days ago with the installation of a new Java Version, but I'm not sure if this causes any problems.
    Thanks for any suggestions

    ok,
    I've found this in the logfiles:
    Started verify/repair permissions on disk disk0s2 Macintosh HD
    Error -9972: The underlying task reported failure on exit
    Finished verify/repair permissions on disk disk0s2 Macintosh HD
    Error detected while verifying/repairing permissions on disk0s2 Macintosh HD: The underlying task reported failure on exit (-9972)
    Repairing the keychains worked fine but didn't solve the problem at all.

  • Repair Disk Permissions ./usr?

    This is the second time I've seen this after running my Repair Disk Permissions. Does anyone know what this means?
    Group differs on ./usr, should be 0, group is 80
    Owner and group corrected on ./usr
    Permissions corrected on ./usr
    I've had my Mac for 2 years and run my Repair Disk Permissions regularly - I've only seen this once before a few months ago and now.
    Also, where would I find ./usr
    Thanks for any help or info.
    BJArt

    I'm the only one that uses my Mac....
    The operating system is made up of many small applications called processes. Each of these processes has a user (owner) and a group associated with it. Open the Activity Monitor in the Utilities folder and select All Processes in the drop down menu. You are not alone! You should see yourself running applications (processes) and at least root and nobody listed as users. You may be the only login user on your computer but the operating system contains many non-login users that control different processes. The root user primarily controls the operating system. In OS X the root user is a non-login user unless you make root a login user.
    Who am I?
    Every user has a primary group associated with that user. Let me do the "heavy lifting" from within the Terminal application. Of course you can try the command to see the ---text_output---. I'll use the command id to see who I am:
    [purplehaze:~] fred% id
    ---text_output---
    uid=501(fred) gid=501(fred) groups=501(fred), 79(appserverusr), 80(admin), 81(appserveradm)
    I'm user 501(uid) whose shortname is fred. My primary group(gid) is 501 or fred. I belong to 4 groups. Because I belong to the group admin, I can install system software and perform tasks only the root user can do.
    Who are they?
    Let's look at the id for the root user:
    [purplehaze:~] fred% id root
    ---text_output---
    uid=0(root) gid=0(wheel) groups=0(wheel), 1(daemon), 2(kmem), 3(sys), 4(tty), 5(operator), 20(staff), 31(guest), 80(admin)
    root's primary group (gid) is 0 or wheel. You can express users and groups in words or numbers. The root user belongs to many groups tied to running the operating system. Let's query the netinfo database for all the users on my computer showing the uid and gid in numbers, their shortname, where their home folder is, and their realname:
    [purplehaze:~] fred% nireport . /users uid gid name home realname
    ---text_output---
    -2 -2 nobody /var/empty Unprivileged User
    0 0 root /var/root System Administrator
    1 1 daemon /var/root System Services
    99 99 unknown /var/empty Unknown User
    25 25 smmsp /private/etc/mail Sendmail User
    26 26 lp /var/spool/cups Printing Services
    27 27 postfix /var/spool/postfix Postfix User
    70 70 www /Library/WebServer World Wide Web Server
    71 71 eppc /var/empty Apple Events User
    74 74 mysql /var/empty MySQL Server
    75 75 sshd /var/empty sshd Privilege separation
    76 76 qtss /var/empty QuickTime Streaming Server
    77 6 cyrus /var/imap Cyrus User
    78 78 mailman /var/empty Mailman user
    79 79 appserver /var/empty Application Server
    501 501 fred /Users/fred Mark Jalbert
    502 502 saraswati /Users/saraswati saraswati
    Users above 500 are login users. User 501 was created when I installed my system software . User 502 is another login user on my system that I created. I have the ability to create other users because I belong to the group admin (80) Remember- only the root user or users who belong to the group admin can perform changes to the OS. Users below 500 where created by the operating system during installation and are responsible for running processes tied to the OS.
    Hopefully, I haven't lost you in to much techno babble. You are not the root user but you are a member of the group admin. This allows you to take on the role of the root user and make changes to the operating system. As I said before- It's not a big deal whether the /usr folder has the group admin associated with it. If repairing permissions will not permanently change the group to 0 (wheel) then I suspect you may have some file corruption. From the Finder > Go menu > Go to Folder... type /usr and click to Go button to see inside the /usr folder.

  • Constantly having to repair disk permissions after hanging system

    From the time I purchased this I've had ongoing issues with the java, flash, OS updates causing the computer to hang forever. Sometimes I end up having to press the off button because Command Q and Command/Option/Escape won't allow a force quit even after a 20 minute wait. I don't know enough about what's going on behind the boot up to know what's wrong. Here is a copy of my console log and this is exactly what they look like each time after I have gone in and done a disk verify, (says it's okay) and then repair disk permissions. I've had to boot to safe mode 3 times today and repair permissions due to this issue. There is nothing plugged into the computer except the power cord. The OS is up to date per Software Update and the only 3rd party software installed is SKYPE ...
    1/25/11 5:45:58 PM SoftwareUpdateCheck[520] Checking for updates
    1/25/11 5:45:58 PM storeagent[524] port created
    1/25/11 5:46:27 PM com.apple.launchd[1] (com.apple.suhelperd[522]) Exited with exit code: 2
    1/25/11 5:46:27 PM com.apple.launchd.peruser.501[88] ([0x0-0x3d03d].SoftwareUpdateCheck[520]) Exited with exit code: 102
    1/25/11 8:21:42 PM [0x0-0x52052].com.skype.skype[613] Main starting with pid 613 parent pid 88
    1/25/11 8:21:43 PM Skype[613] SkypeApplication::init called
    1/25/11 10:56:56 PM com.apple.launchd[1] * launchd[1] has started up. *
    1/25/11 11:09:29 PM com.apple.fontd[70] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/25/11 11:09:31 PM com.apple.WindowServer[72] Tue Jan 25 23:09:31 Troy-Lindstroms-MacBook.local WindowServer[72] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/25/11 11:09:32 PM com.apple.fontd[70] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/25/11 11:09:40 PM com.apple.UserEventAgent-LoginWindow[79] ALF error: cannot find useragent 1102
    1/25/11 11:09:40 PM com.apple.UserEventAgent-LoginWindow[79] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/25/11 11:09:40 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/25/11 11:09:42 PM fontd[100] Database content version mismatch (stored(15) != expected(14))
    1/25/11 11:09:47 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[108]) Exited with exit code: 1
    1/25/11 11:10:09 PM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
    1/25/11 11:10:12 PM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
    1/25/11 11:10:13 PM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[110]) Exited: Killed
    1/25/11 11:10:14 PM com.apple.loginwindow[22] shutdown: / is busy updating; waiting for lock
    1/25/11 11:10:33 PM com.apple.launchd[1] * launchd[1] has started up. *
    1/25/11 11:11:24 PM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
    1/25/11 11:11:24 PM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/25/11 11:11:24 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/25/11 11:11:28 PM fontd[101] Database content version mismatch (stored(15) != expected(14))
    1/25/11 11:11:28 PM fontd[101] Failed to open read-only database, regenerating DB
    1/25/11 11:11:34 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
    1/25/11 11:11:40 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/25/11 11:11:48 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/25/11 11:11:49 PM [0x0-0x9009].com.skype.skype[116] Main starting with pid 116 parent pid 90
    1/25/11 11:11:51 PM Skype[116] SkypeApplication::init called
    1/25/11 11:38:12 PM com.apple.WindowServer[69] Tue Jan 25 23:38:12 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/26/11 11:36:13 AM [0x0-0x6d06d].com.skype.skype[666] Main starting with pid 666 parent pid 90
    1/26/11 11:36:14 AM Skype[666] SkypeApplication::init called
    1/26/11 12:25:04 PM com.apple.launchd.peruser.501[90] ([0x0-0x6d06d].com.skype.skype[666]) Exited: Terminated
    1/26/11 5:45:58 PM SoftwareUpdateCheck[867] Checking for updates
    1/26/11 5:45:58 PM storeagent[870] port created
    1/26/11 5:47:17 PM com.apple.launchd[1] (com.apple.suhelperd[869]) Exited with exit code: 2
    1/26/11 5:47:17 PM com.apple.launchd.peruser.501[90] ([0x0-0x92092].SoftwareUpdateCheck[867]) Exited with exit code: 102
    1/26/11 8:32:58 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:32:58 Troy-Lindstroms-MacBook.local Safari[143] <Error>: unknown error code: invalid drawable
    1/26/11 8:32:58 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:32:58 Troy-Lindstroms-MacBook.local Safari[143] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/26/11 8:33:10 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:33:10 Troy-Lindstroms-MacBook.local Safari[143] <Error>: unknown error code: invalid drawable
    1/26/11 8:33:24 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:33:24 Troy-Lindstroms-MacBook.local Safari[143] <Error>: unknown error code: invalid drawable
    1/26/11 10:48:32 PM com.apple.launchd.peruser.501[90] ([0x0-0x11011].com.apple.Safari[143]) Exited: Terminated
    1/26/11 10:49:37 PM com.apple.launchd[1] (com.apple.suhelperd[1047]) Exited with exit code: 2
    1/26/11 10:49:44 PM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
    1/27/11 11:39:52 PM com.apple.launchd[1] * launchd[1] has started up. *
    1/27/11 11:40:14 PM com.apple.launchd.peruser.501[84] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/27/11 11:40:15 PM com.apple.UserEventAgent-LoginWindow[77] ALF error: cannot find useragent 1102
    1/27/11 11:40:15 PM com.apple.UserEventAgent-LoginWindow[77] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/27/11 11:40:15 PM SoftwareUpdateCheck[98] Checking for updates
    1/27/11 11:40:15 PM com.apple.launchd.peruser.501[84] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
    1/27/11 11:40:17 PM storeagent[119] port created
    1/27/11 11:40:21 PM com.apple.WindowServer[65] Thu Jan 27 23:40:21 Troy-Lindstroms-MacBook.local WindowServer[65] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/27/11 11:40:27 PM [0x0-0xa00a].com.skype.skype[116] Main starting with pid 116 parent pid 84
    1/27/11 11:40:29 PM Skype[116] SkypeApplication::init called
    1/27/11 11:41:02 PM SoftwareUpdateCheck[98] Downloading "iTunes"
    1/27/11 11:42:35 PM SoftwareUpdateCheck[98] Auto-download of "iTunes" SUCCESSFUL.
    1/27/11 11:42:35 PM SoftwareUpdateCheck[98] Launching app
    1/27/11 11:43:20 PM com.apple.launchd.peruser.501[84] ([0x0-0x6006].SoftwareUpdateCheck[98]) Exited with exit code: 102
    1/28/11 9:51:59 AM com.apple.RemoteUI[589] CoreAnimation: rendering error 501
    1/28/11 9:52:15 AM com.apple.RemoteUI[589] HTTP2 Streaming Reads ON
    1/28/11 11:31:15 AM com.apple.launchd.peruser.501[84] ([0x0-0x10010].com.apple.Safari[134]) Exited: Terminated
    1/28/11 11:42:21 AM com.apple.launchd[1] (com.apple.suhelperd[104]) Exited with exit code: 2
    1/28/11 3:49:50 PM com.apple.launchd.peruser.501[84] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
    1/28/11 3:49:50 PM com.apple.launchd.peruser.501[84] ([0x0-0x80080].com.apple.iTunesHelper[764]) Exited: Killed
    1/28/11 3:50:10 PM com.apple.launchd.peruser.501[84] (com.apple.Dock.agent[88]) Exit timeout elapsed (20 seconds). Killing
    1/28/11 3:53:36 PM com.apple.launchd[1] * launchd[1] has started up. *
    1/28/11 3:55:16 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/28/11 3:55:16 PM com.apple.UserEventAgent-LoginWindow[82] ALF error: cannot find useragent 1102
    1/28/11 3:55:16 PM com.apple.UserEventAgent-LoginWindow[82] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/28/11 3:55:25 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
    1/28/11 3:55:27 PM com.apple.WindowServer[72] Fri Jan 28 15:55:27 Troy-Lindstroms-MacBook.local WindowServer[72] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/28/11 3:55:40 PM [0x0-0x8008].com.skype.skype[115] Main starting with pid 115 parent pid 90
    1/28/11 3:55:41 PM Skype[115] SkypeApplication::init called
    1/28/11 11:40:16 PM SoftwareUpdateCheck[419] Checking for updates
    1/28/11 11:40:16 PM storeagent[422] port created
    1/28/11 11:40:59 PM com.apple.launchd[1] (com.apple.suhelperd[421]) Exited with exit code: 2
    1/28/11 11:40:59 PM com.apple.launchd.peruser.501[90] ([0x0-0x56056].SoftwareUpdateCheck[419]) Exited with exit code: 102
    1/29/11 3:02:24 AM quicklookd[551] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/images-30.jpeg>' (Start date: 2011-01-29 03:02:04 -0800)
    1/29/11 3:05:11 AM quicklookd[555] [QL] 'Creating thumbnail - cancelled' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/About Downloads.pdf>' (Start date: 2011-01-29 03:03:35 -0800)
    1/29/11 3:05:52 AM quicklookd[560] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/About Downloads.pdf>' (Start date: 2011-01-29 03:05:32 -0800)
    1/29/11 3:06:44 AM quicklookd[563] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/images-3.jpeg>' (Start date: 2011-01-29 03:06:22 -0800)
    1/29/11 6:37:03 AM com.apple.launchd.peruser.501[90] ([0x0-0x86086].com.apple.Preview[708]) Exited: Killed
    1/29/11 6:37:03 AM com.apple.launchd.peruser.501[90] ([0x0-0x8a08a].com.apple.systemevents[721]) Exited: Killed
    1/29/11 6:37:03 AM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
    1/29/11 6:37:13 AM com.apple.launchd[1] * launchd[1] has started up. *
    1/29/11 6:37:42 AM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
    1/29/11 6:37:42 AM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/29/11 6:37:42 AM com.apple.launchd.peruser.501[89] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/29/11 6:37:50 AM com.apple.WindowServer[54] Sat Jan 29 06:37:50 Troy-Lindstroms-MacBook.local WindowServer[54] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/29/11 6:37:52 AM com.apple.launchd.peruser.501[89] (com.apple.Kerberos.renew.plist[109]) Exited with exit code: 1
    1/29/11 6:38:03 AM [0x0-0x8008].com.skype.skype[113] Main starting with pid 113 parent pid 89
    1/29/11 6:38:05 AM Skype[113] SkypeApplication::init called
    1/29/11 12:14:57 PM [0x0-0x36036].com.apple.CharacterPaletteIM[330] objc[330]: Class ThinDividerSplitView is implemented in both /System/Library/Input Methods/CharacterPalette.app/Contents/MacOS/CharacterPalette and /System/Library/Input Methods/CharacterPalette.app/Contents/PlugIns/RomanView.CharPalettePlugin/Conte nts/MacOS/RomanView. One of the two will be used. Which one is undefined.
    1/29/11 12:43:40 PM [0x0-0x39039].com.apple.CharacterPaletteIM[346] objc[346]: Class ThinDividerSplitView is implemented in both /System/Library/Input Methods/CharacterPalette.app/Contents/MacOS/CharacterPalette and /System/Library/Input Methods/CharacterPalette.app/Contents/PlugIns/RomanView.CharPalettePlugin/Conte nts/MacOS/RomanView. One of the two will be used. Which one is undefined.
    1/29/11 6:52:46 PM com.apple.launchd.peruser.501[89] ([0x0-0xf00f].com.apple.Safari[131]) Exited: Terminated
    1/29/11 6:52:59 PM com.apple.launchd.peruser.501[89] ([0x0-0x1e01e].com.apple.AddressBook[206]) Exited: Terminated
    1/29/11 6:52:59 PM loginwindow[29] * -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)
    1/29/11 6:52:59 PM com.apple.loginwindow[29] 2011-01-29 18:52:59.446 loginwindow[29:107] * -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)
    1/29/11 6:53:14 PM com.apple.launchd.peruser.501[89] (com.apple.AirPortBaseStationAgent[111]) Exited: Killed
    1/30/11 9:17:52 AM com.apple.launchd[1] * launchd[1] has started up. *
    1/30/11 9:19:51 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/30/11 9:19:51 AM com.apple.WindowServer[68] Sun Jan 30 09:19:51 Troy-Lindstroms-MacBook.local WindowServer[68] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/30/11 9:19:54 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/30/11 9:20:00 AM com.apple.UserEventAgent-LoginWindow[78] ALF error: cannot find useragent 1102
    1/30/11 9:20:00 AM com.apple.UserEventAgent-LoginWindow[78] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/30/11 9:20:00 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/30/11 9:20:02 AM fontd[98] Database content version mismatch (stored(15) != expected(14))
    1/30/11 9:20:04 AM SoftwareUpdateCheck[94] Checking for updates
    1/30/11 9:20:05 AM storeagent[102] port created
    1/30/11 9:20:08 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[109]) Exited with exit code: 1
    1/30/11 9:20:38 AM com.apple.launchd.peruser.501[86] (com.apple.AirPortBaseStationAgent[111]) Exited: Killed
    1/30/11 9:20:39 AM com.apple.loginwindow[22] shutdown: / is busy updating; waiting for lock
    1/30/11 9:20:44 AM com.apple.launchd[1] (com.apple.suhelperd[101]) Exited with exit code: 2
    1/30/11 9:20:45 AM com.apple.launchd.peruser.501[86] ([0x0-0x6006].SoftwareUpdateCheck[94]) Exited with exit code: 102
    1/30/11 9:20:49 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
    1/30/11 9:20:55 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
    1/30/11 9:21:16 AM com.apple.launchd[1] * launchd[1] has started up. *
    1/30/11 9:22:04 AM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
    1/30/11 9:22:04 AM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/30/11 9:22:04 AM com.apple.launchd.peruser.501[89] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/30/11 9:22:07 AM fontd[101] Database content version mismatch (stored(15) != expected(14))
    1/30/11 9:22:07 AM fontd[101] Failed to open read-only database, regenerating DB
    1/30/11 9:22:11 AM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/30/11 9:22:13 AM com.apple.launchd.peruser.501[89] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
    1/30/11 9:22:19 AM com.apple.WindowServer[69] Sun Jan 30 09:22:19 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/30/11 9:22:26 AM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/30/11 9:22:26 AM [0x0-0x9009].com.skype.skype[116] Main starting with pid 116 parent pid 89
    1/30/11 9:22:28 AM Skype[116] SkypeApplication::init called
    1/30/11 10:33:53 AM com.apple.launchd.peruser.501[89] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
    1/30/11 10:34:02 AM com.apple.launchd[1] * launchd[1] has started up. *
    1/30/11 10:34:26 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/30/11 10:34:26 AM com.apple.UserEventAgent-LoginWindow[79] ALF error: cannot find useragent 1102
    1/30/11 10:34:26 AM com.apple.UserEventAgent-LoginWindow[79] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/30/11 10:34:28 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[107]) Exited with exit code: 1
    1/30/11 10:34:32 AM [0x0-0x8008].com.skype.skype[112] Main starting with pid 112 parent pid 86
    1/30/11 10:34:36 AM Skype[112] SkypeApplication::init called
    1/30/11 3:37:45 PM com.apple.launchd[1] * launchd[1] has started up. *
    1/30/11 3:50:19 PM com.apple.fontd[68] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/30/11 3:50:19 PM com.apple.WindowServer[69] Sun Jan 30 15:50:19 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/30/11 3:50:21 PM com.apple.fontd[68] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/30/11 3:50:52 PM com.apple.coreservicesd[45] ThrottleProcessIO: throttling disk i/o
    1/30/11 3:53:14 PM com.apple.UserEventAgent-LoginWindow[80] ALF error: cannot find useragent 1102
    1/30/11 3:53:14 PM com.apple.UserEventAgent-LoginWindow[80] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/30/11 3:53:14 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/30/11 3:53:15 PM fontd[101] Database content version mismatch (stored(15) != expected(14))
    1/30/11 3:53:18 PM com.apple.coreservicesd[45] ThrottleProcessIO: throttling disk i/o
    1/30/11 3:53:20 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[109]) Exited with exit code: 1
    1/30/11 4:00:53 PM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[111]) Exited: Killed
    1/30/11 4:12:07 PM com.apple.launchd[1] * launchd[1] has started up. *
    1/30/11 4:12:56 PM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
    1/30/11 4:12:56 PM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/30/11 4:12:56 PM com.apple.launchd.peruser.501[89] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/30/11 4:12:59 PM fontd[101] Database content version mismatch (stored(15) != expected(14))
    1/30/11 4:12:59 PM fontd[101] Failed to open read-only database, regenerating DB
    1/30/11 4:13:06 PM com.apple.launchd.peruser.501[89] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
    1/30/11 4:13:15 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/30/11 4:13:21 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/30/11 4:13:21 PM [0x0-0x9009].com.skype.skype[116] Main starting with pid 116 parent pid 89
    1/30/11 4:13:23 PM Skype[116] SkypeApplication::init called
    1/30/11 5:12:33 PM com.apple.WindowServer[69] Sun Jan 30 17:12:33 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/30/11 5:12:34 PM com.apple.RemoteUI[169] CoreAnimation: rendering error 501
    1/30/11 5:12:46 PM com.apple.launchd.peruser.501[89] ([0x0-0x9009].com.skype.skype[116]) Exited: Terminated
    1/30/11 5:12:49 PM com.apple.RemoteUI[169] HTTP2 Streaming Reads ON
    1/30/11 5:13:12 PM System Preferences[175] .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
    1/31/11 12:17:59 AM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 5 seconds
    1/31/11 12:54:05 AM com.apple.launchd.peruser.501[89] ([0x0-0x18018].com.apple.Safari[180]) Exited: Terminated
    1/31/11 1:31:00 AM com.apple.launchd.peruser.501[89] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
    1/31/11 1:31:24 AM com.apple.launchd[1] * launchd[1] has started up. *
    1/31/11 1:33:28 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/31/11 1:33:29 AM com.apple.WindowServer[67] Mon Jan 31 01:33:29 Troy-Lindstroms-MacBook.local WindowServer[67] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    1/31/11 1:33:31 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/31/11 1:33:48 AM com.apple.UserEventAgent-LoginWindow[76] ALF error: cannot find useragent 1102
    1/31/11 1:33:48 AM com.apple.UserEventAgent-LoginWindow[76] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/31/11 1:33:48 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/31/11 1:33:50 AM fontd[96] Database content version mismatch (stored(15) != expected(14))
    1/31/11 1:33:54 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[105]) Exited with exit code: 1
    1/31/11 1:34:13 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
    1/31/11 1:34:13 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
    1/31/11 1:44:00 AM com.apple.launchd.peruser.501[86] (com.apple.AirPortBaseStationAgent[107]) Exited: Killed
    1/31/11 1:44:10 AM com.apple.launchd[1] * launchd[1] has started up. *
    1/31/11 1:44:43 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    1/31/11 1:44:43 AM fontd[95] Database content version mismatch (stored(15) != expected(14))
    1/31/11 1:44:43 AM fontd[95] Failed to open read-only database, regenerating DB
    1/31/11 1:44:44 AM com.apple.UserEventAgent-LoginWindow[79] ALF error: cannot find useragent 1102
    1/31/11 1:44:44 AM com.apple.UserEventAgent-LoginWindow[79] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    1/31/11 1:44:45 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[108]) Exited with exit code: 1
    1/31/11 1:44:45 AM com.apple.fontd[95] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/31/11 1:44:57 AM com.apple.fontd[95] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    1/31/11 1:44:58 AM [0x0-0x8008].com.skype.skype[112] Main starting with pid 112 parent pid 86
    1/31/11 1:45:00 AM Skype[112] SkypeApplication::init called
    1/31/11 2:00:28 AM com.apple.launchd[1] (com.apple.suhelperd[141]) Exited with exit code: 2
    Can anyone see the issue or tell me what I need to do to fix this thing???

    Which MacBook model? Did it come with OSX 10.6 or did you upgrade it?

  • Repair Disk Permissions Issues

    I'm not sure I am posting this in the correct community but here goes . . .
    I have a 17" Macbook Pro running the latest version of Snow Leopard. It is almost 2 years old and I have 4 gb RAM.
    Recently, it seems to be slowing down and I have to run repair disk permissions 2-3 times a week to recoup a little speed. I also delete my Firefox cache regularly to try to gain a little there. I do make a few videos in iMovie and initially I thought that was the problem but this week I have not really worked in iMovie much and it is still slow. There seems to be some issues in the log of the repair permissions. I hope they show in this image. I don't know what these mean or how to fix them. It is the "permissions differ" entries I am confused about.

    You can ignore those permissions per support article
    http://support.apple.com/kb/TA21090
    Since you brought up iMove, I suspect your storage is nearly full as this most certainly causes the computer to slow down. video files are the biggest culprit.
    Look in your Activity Monitor and reduce the drive space by copying to a external, Disk Utility HFS+ formatted external powered drive of unnecessary files so your boot drive is ideally below 50% filled (yea I know but the computer slows down after that) and not more than 75% filled.
    Once you have done that. Get another newer external powered HFS drive and download the free Carbon Copy Cloner and clone the internal drive to the external.
    Hold option and boot off the external clone, test it out then use Disk Utility to erase the internal and then reverse clone the external onto the internal, this will defragment and optimize your drive so the OS and programs are on the fast part of the drive, not the slow parts.
    Reboot into the internal and run off of the free OnyX's maintainence and cleaning aspects and reboot.
    http://www.titanium.free.fr/
    Sir speedy machine here we come!
    Now of course you may have other issues that could be causing your slow down, like not enough RAM or some sort of failed process or leftover program, tweaks or simply a slow Internet.
    You can opt to simply reinstall OS X 10.6 ( by holding c and booting off the installer disk ) over your installed version (doesn't touch files or programs) then immediatly Software Updating until clear, that will clean anything hanging out in OS X.
    If you still have slowdowns, then it's in what geeks call "User land" basically something installed outside of root, like a program or only runs in user, not in OS X.
    For that you need to create a new user, transfer your files via the Shared Drop and wean yourself off the old user and finally delete it. Also install all new versions of your third party programs removing the originals first.
    That should do it.

  • Repair Disk Permissions utility stalled - I have read the knowledge base

    I have researched the knowledge base and search for posts on this and cannot find answer: Running 10.4 at the latest version. used the original install 1 disc I received with Tiger to repair disc permissions (like Apple support has told me to do in the past, but my current research said I do not need to do this unless certain parameters are met, and none of the parameters applied, but oh well, I am here anyway). Cold Boot from the original install disc 1 and slected the start up disk I use (I only have one start up disc/drive). Did a repair disc permissions and got a long running routine that reporting a lot of fixes, then the utility has stalled -- no progress on the progress bar. I "stopped" the process using the "stop repair" button (three times). The log reflected the utility stopped, but the progress bar still is blue and not moving (for a couple of hours). When I go to quity File >Disk Utility, it warns me that Disk Utility is running and this may make my system unstable/unsuable.
    QUESTION: CAN I JUST QUIT DISK UTILITY AND NOT HAVE ANY ADVERSE AFFECT ON MY IMAC DRIVE?

    Thanks for your advice, I still have an issue:
    -after the first repair disk permission "stalled" process, I exited Disk Utility and cold booted the machine after I had disconnected all external devices other than the original iMac keyboard
    -obtained the combo patch for 10.4.7 from the Apple download site (it had already been installed but I reinstalled per your advice)
    -re-applied the combo patch and then did another cold boot
    -ran Disk Utility from the original Tiger install #1 disk, and then selected "repair disk permissions" for my start up disk (I only have one)
    - process ran for 10 minutes or so then gave the following error message: "Disk Utility Error: Disk Utility has lost its connection with disk utility management tool and cannot continue. Please quit disk utility and re-launch disk utility"
    - I pushed the "stop disk permission repair" button, then quit disk utility, then cold booted the machine again.
    -re-applied combo patch as above, then cold booted the machine
    -ran disk utility from the original iMac install #1 disk, ran "repair disk permissions", and then received the same error message as above.
    - I then just quit Disk Utility and cold booted the machine again and went about my business. There does not seem to be any problem with the machine (was not before, but I ran repair permissions thinkging this was a routine maintenance taks that should be run)
    - in my prior search of the knowledge base, I found the following information about repair disk permissions:
    Location: http://discussions.apple.com/thread.jspa?messageID=607495&#607495
    How often should I Repair Permissions?
    You do not need to Repair Permissions on a regular basis.
    There are only three occasions you need to do this:
    1. When you have just installed something that required you to run an Installer, rather than just copying some software to a folder. This should be done for both Apple and non-Apple software.
    2. When you have been working on your OS X files or folders while booted from OS 9, or remotely connected via a non-OS X machine, since OS 9 and other systems do not handle OS X's permissions correctly.
    3. The other case is if your system is behaving strangely, when you should run Disk Repair from your CD followed by Repair Permissions. This is just to eliminate these things before going on to further trouble-shooting.
    Otherwise you can happily forget about Permissions!"
    So, it would appear I do not need to do anything else; the machine seems to be working properly. Is there anything else I need to do? thanks for the help! Bob

Maybe you are looking for

  • Porject code from requisition not going to PO from auto create

    Hi We are adding a project code to the requisition. and after all approvals for the requisition we want the project code which is a 4 digit number to populate the dff on the PO form when we use auto create function. please let me know how can we go a

  • Center text inside shape in titler?

    Is there any way to center text inside a shape within the titler?   For example let's say I use the Rounded Rectangle Tool to create a shape and put it in the lower third of title area, then use the Text Tool to type in a line of text.  For now I'm h

  • Windows 8 vs CS3 trouble

    I've upgraded to Windows 8 and having trouble running CS3 after re-installing it.  Can you help?

  • Proposal: User Autologin to X11 via LUKS Key

    I'm running several Linux Desktop Systems with Full Drive Encryption. cryptsetup LUKS. The main LVM group, incl. the root volume, gets opened from inside the initrd. I think many of you will know this. And Linux is a multiuser Operating System, so th

  • Sorting Web Gallery

    After sorting my pictures into Events, I started creating Web Galleries, which are great. The annoying thing is that they are organized in the order I created them, but I would prefer that they ordered themselves by date. When I right-click on any of