Can I physically install my 0.5 TB USB 2 external drive in my Mac Pro?

Hi guys.
I bought a .5 TB external USB hard drive a while back when I used to produce/sequence my music on a PC. Since switching I've re-formatted the drive to HFS, re-installed my samples etc, and now use it with my Mac Pro. My question is:
Could I remove the drive from it's external housing and install it to a bay inside my Pro? Would the data transfer be quicker if I were to do this? Although the drive works fine, there are times when I experience a tiny dropout in audio when a sample is launched - as a result of the file being streamed from USB - and would installing the drive internally improve this?
The specs of the drive are:
USB2.0 Storage Device:
Capacity: 465.76 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Cypress Semiconductor
OS9 Drivers: No
Product ID: 0x6830
Serial Number: DEF10D4838C4
S.M.A.R.T. status: Not Supported
Vendor ID: 0x04b4
Volumes:
External Drive:
Capacity: 465.64 GB
Available: 383.83 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /Volumes/External Drive 1
I'm a little inexperienced with drives, so any advice would be very much appreciated.
Dan

if it is SATA (unlikely) it would have an SATA port on the case along with USB2.
As you say, it is unlikely that a commercial USB drive will utilize a SATA hard drive inside. This will probably be true in most cases until PATA hard drives are more difficult to find.
However, there are several empty enclosures on the market that support SATA hard drives and only have a USB port. I prefer external SATA combo enclosures that provide both SATA and USB so that they can be used with wide range of enclosures and with a SATA data port when speed is required.
One SATA hard drive enclosure with this feature is the ICY DOCK Hot Swap eSATA/USB 2.0 Mobile Enclosure (MB559US-1S)
http://www.amug.org/amug-web/html/amug/reviews/articles/cremax/mb559/
I imagine this user will find when he opens the USB case that it is a PATA hard drive and he will be limited to placing it in a 3.5" to 5.25" bracket and installing it in the second bay of the Mac Pro DVD housing. This should double the performance of the hard drive compared to the USB connection.
If it is SATA the mounting task is simpler. Either way the hard drive should be able to be utilized internally.

Similar Messages

How can i transfer all my data 250 GB from external hard disk to MAC pro

How can i transfer all my data 250 GB from external hard disk to MAC pro

The simple answer is just connect the external hard drive and drag the files from there to wherever you want them to go. If you need to do something more specific, you'll have to provide more details.

HT201064 I AM UNABLE TO INSTALL ADOBE PHOTOSHOP VIA MY APPLE EXTERNAL DRIVE TO MY MACBOOK PRO

I AMM UNABLE TO INSTALL ADOBE PHOTOSHOP VIA MY APPLE EXTERNAL DRIVE TO MY NEW MACBOOK PRO, DOES ANYONE HAVE ANY HELP?

Please don't use all Caps, it is considered shouting in forums.
Please explain your problem in more detail.
Thanks
pete

Can I use/install the windows 8 at the same time on my mac pro..?

Can I install windows 8 also in my mac pro because I have some financial software which I use to manage my accounts and they work only on windows !!!
Need Help !!!

Yes. You can use Apple BootCamp
Boot Camp: System requirements for Microsoft Windows operating systems
http://www.apple.com/support/bootcamp/
Yuu can also use Windows in a virtual machine like the free VirtualBox or the paid Parallels.
In any event you need to purchase the Windows software.

Brand new hard drive. Can I re-install, bare-bones, from my USB Passport drive?

My CD drive doesn't seem to work to reistall OSX and restore from there. Is it possible to restore, bare-bones, from my passport drive?

Hi:
Sure you should be able to do that.
Why not save your money and install W7 on the existing hard drive?
Use the advanced options on the W7 install screen to delete all partitions, create and format a new partition.
Here is the link to the W7 Home Premium 64 bit SP1 ISO file...
Windows 7 Home Premium x64 SP1 U (media refresh)
latest and greatest
X17-58997.iso
Then you can either burn the ISO file to a DVD using the burn ISO file menu option on your DVD burning program. Burn at the slowest speed you can or...
Use the Microsoft Windows USB/DVD Download Tool to transfer the ISO file to a 4 GB USB Flash drive or DVD.
The tool will also make the media bootable.
http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool
Then go to your PC's support page to download the drivers and available software you need.

Boot Camp install of Win 7 TO USB external drive?

Hi,
I recently bought a 32 GB USB thumb drive. I was able to install a full copy of SL on the drive and use it to boot several different Macs in my household -- it's a little slow, but it works fine. The procedure was dead simple -- format the drive and away you go.
I cannot, for the life of me, figure out how to do the same thing with Boot Camp/Windows, i.e. install a copy of Windows on the USB thumb drive such that it will boot and run on a Mac.
I read somewhere else here that it isn't possible -- that Boot Camp can only run on an internal drive. I guess my question is: if all my Macs can install and boot OSX from an external USB drive, why isn't it possible to the same with Windows?
(As I type this it occurs that I didn't try booting the Mac from the USB drive, partitioning the thumb drive in Boot Camp and installing Windows from there. It would be pretty slow going, but maybe that's a solution?)
Thanks for any/all illumination!

From my days using ThinkPads (long, long ago) I remember doing flash updates to the BIOS. The updates came from IBM, not Microsoft (so I assume the BIOS was hardware-based, not software (i.e. Windows o/s) based.
That suggests (to me, anyway!) that something in the Mac motherboard prevents installing Windows on an external drive (but allows OSX to be so-installed).
I've also read the Macs use "open firmware" instead of BIOS and that open firmware is, to some degree, programmable (as in programmable to allow Win to boot from a USB drive).
Am I on the right track or am I completely, totally, wrong?! (I'm 'way over my head here).

I am trying to re-install mountain lion on a new hard drive on a mac pro but get a backward slash with a circle

I am trying to reinstall mountain lion in a mac pro with a new ssd drive but will not let me. It gives me a back slash with a circle. I have 2 optical drives, first is a blu-ray and the second is a super drive. could that be the cause?

Firstly, you need to partition and format the SSD. You need to be able to boot the computer from another drive that has a bootable OS X system installed or a Snow Leopard DVD installer that works on the computer.
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How can I import images from my camera to my external drive instead of Mac, but still use IPhoto?

I would like to preserve space on my new Mac and import photos from my camera to my external drive instead of my Mac, while still being able to use Iphoto. Not sure how to specify this.

Move your Library to the Extnernal Disk -
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Then import as normal.
Regards
TD

Can I install Mt Lion directly onto USB thumb drive?

I want to tryout Mt Lion without a lot of reinstalling of Snow Leopard issues. Can I just install Mt Lion onto a USB thumb drive or external HD via Firewire 800 to demo Mt. Lion and if I don't like it then I won't have to reinstall SL.

Yes, if the Thumb drive is big enough. I installed it on an External Drive myself... & went back to 10.5/10.6 for getting work done.
Also, the Installer "conveniently" erases itself after install, so to save a huge download if needed again... make a copy of it before you install.

Can I install windows 7 on a second internal drive on a macbook pro 2011?

Can I install windows 7 on a second internal drive on a macbook pro 2011? I have 2 500 gb. SSD drives in my 2011 MacBook Pro. My plan was to install windows 7 on the 2nd drive. I'm new at owning Macs so I have had Windows on main drive using bootcamp but I wanted to speed up my 17" Mac so I maxed out the memory and added the SSD drives. Thinking I could put the 2 operating systems on seperate drives I bought to 2 SSD's. Is there any way to do this. So far I have drawn a blank. Any ideas?

Yes. Just install Windows onto it without using the Boot Camp Assistant to partition it.
(124769)

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

Can I move hard drives from one Mac Pro to another?

I have two mid-2010 Mac Pros that I work with daily - one 8-core on 10.7.3 and one 12-core on 12.7.4. I would like to take all of the drives out of one Mac Pro and put them in the other and vice versa, essentially trading their content. It probably sounds pointless, but I would like to build the more powerful one out from scratch, and right now the less powerful one is nearly empty.
Can I simply shut off both machines and swap all of the drives in one for all of the drives in the other? I would keep them in the same bays in the machine I'm trading them with, but I'm unsure if I will screw something else up.

rfairley wrote:
...Can I simply shut off both machines and swap all of the drives in one for all of the drives in the other? I would keep them in the same bays in the machine I'm trading them with, but I'm unsure if I will screw something else up.
I've moved drives from a Mac Pro 1,1 to a 5,1 and they were able to boot the newer Mac, but to ensure that the OS was configured for the newer machine, I ran the appropriate combo updater once the drive was installed. If you're planning to stick with the drive rotation, doing that shouldn't hurt and might help even though the machines are of the same vintage. Note, however, that some commercial software keys in on machine specifics and/or the serial number to prevent piracy, so swapping drives can cause other problems.

4 Questions re installing a second Optical Drive in a Mac Pro (Harpertown)

For years I have owned and used a Sony DRX-810UL-T optical drive as an external unit with my Mac Pro "Harpertown" purchased on February 19, 2009. It was connected to the computer using the firewire cable and it worked correctly.
Some Background
Today it dawned on me I had an empty optical drive bay in the Mac Pro so I should move the Sony drive in there and eliminate a bit of the clutter on my computer desk. I read the section on installing optical drives in the little Apple manual that came with my computer but it only discussed a single drive installation.
Checked on line and found several sources describing how to do this and a couple of YouTube videos also showing how to do this. (Oddly only one of the videos mentioned the need for plugging in the power cable).
I made sure I plugged the cables into the proper units as both had helpful legends on them indicating which was for the top drive and which was for the bottom drive.
After installation I powered up and found neither drive would appear.
Checked the About this Mac item in the Apple menu and got confirmation that the system didn't see any drives. Opened the computer again and unplugged the Sony's power and data cables then closed the computer and fired up again.
The original Super Drive again appeared and worked correctly.
The Questions:
1. Since the Super drive came with the Mac Pro and was in the top space can I assume it needed to stay there and not get moved to the lower space?
2. Since the Sony DRX-810UL-T has the correct connectors does this indicate this drive can be used with the Harpertown Mac Pro?
3. If it can, did I miss setting some jumpers? I noticed both drives have one jumper in place but each appears to be in a slightly different spot than the other.
4. Since the Sony drive worked correctly with my current OS (10.6.6) using the firewire cable can I assume it does not need a firmware update to be used internally.
Wrap up
Since the original Super Drive is working properly I am sure I did no damage to it or the computer. It would be nice to be able to get the Sony DVD drive to work internally, however.
Thanks, in advance, to anyone who can offer some help with this situation.

hatter,
Thank you for this added information. Here's the current status of things.
Just to check that the Sony drive would work internally I disconnected the superdrive (ata cable and power cable) and made the Sony drive the only drive plugging it in as if it was the top drive. The jumper for it was set to cable select.
The Profiler found it and listed is in both the ATA section and the disc burner section.
I checked the jumper on the superdrive to be sure it was also set for cable select and plugged both drives back in using the top connections for the super drive and bottom connections for the Sony,
Again only the SuperDrive appears in the ATA list and and the disc burner list.
I am beginning to wonder it the problem may actually be with the ribbon cable that snakes back to the motherboard.
Since that cable has a set of dual outlets at the drive end and has them labeled for top and bottom, is it possible to plug in only one drive using the bottom connector as a test to see if data flows to the motherboard?
Is it possible some part of that cable has somehow become disconnected at the motherboard?

I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

The device may be formatted for Windows, as NTFS. The format is readable, but not natively writable on a Mac. To write to the device, you must either reformat it (erasing all the contents) or install third-party software to enable write access to NTFS.

How do I install windows xp on a 2TB external drive osx 10.6.8?

How do I -OR- CAN I
Install Windows XP on a 2TB external drive OSX 10.6.8?
I WILL get another 2TB to back up to 1st!
Should I start over with the New 2TB Drive and put the XP & OSX partitions on it 1st?
BTW... Anyone have an idea where I should send a WindowsXP drive that has the click of death syndrome to get the data off it?
Thanx Y'All
OKMatthew

Microsoft doesn't allow users to install Windows on an external drive, so you can't do it. Instead, install Windows in the internal hard drive through Boot Camp.
Respecting to your second problem, there are companies that recovers data from your hard drive, so you may want to contact with them

Can I physically install my 0.5 TB USB 2 external drive in my Mac Pro?

Similar Messages

Maybe you are looking for